64 C10 Radiator Core Support Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MikeN · 10-17-2023, 10:07 AM

The core support in my 64 already had a not-so-great repair on it when I got the truck in 1996, apparently from some minor crash damage. The welds have finally given up on the repair, and I need to replace the entire core support. Is the quality of the reproduction core supports acceptable? I'm not a body man, so if the reproductions need a lot of massaging, that may not work for me.

joesscamaro · 10-17-2023, 02:19 PM

I'm running one on my truck and will say that it fit pretty nice. I had to elongate a couple of holes to allow for panel alignment but don't have any real complaints. I ordered mine from LMC.

MikeN · 10-17-2023, 04:34 PM

Thank you sir!

**cwcarpenter98** · 10-17-2023, 10:26 PM

I drove up to Auto Metal Direct in Gainesville, GA, to pick mine up a couple years ago. Fit nicely with all my other original sheet metal. I would buy a new one again if I was repairing crash damage or replacing a super rusty original

Justin71105 · 10-18-2023, 12:17 PM

Also have the Auto Metal Direct core support, fit fine no real issues.

MikeN · 10-19-2023, 10:36 AM

Thanks guys. Summit Racing has them in stock, manufactured by Goodmark, and it has 5 star reviews on their site. They deliver for free - i might go that route.

10-17-2023, 10:07 AM	#1
MikeN Registered User Join Date: Oct 2007 Location: Marietta, GA Posts: 805	64 C10 Radiator Core Support Question The core support in my 64 already had a not-so-great repair on it when I got the truck in 1996, apparently from some minor crash damage. The welds have finally given up on the repair, and I need to replace the entire core support. Is the quality of the reproduction core supports acceptable? I'm not a body man, so if the reproductions need a lot of massaging, that may not work for me.

10-17-2023, 02:19 PM	#2
joesscamaro Registered User Join Date: Sep 2008 Location: Newport, North Carolina Posts: 643	Re: 64 C10 Radiator Core Support Question I'm running one on my truck and will say that it fit pretty nice. I had to elongate a couple of holes to allow for panel alignment but don't have any real complaints. I ordered mine from LMC.

10-17-2023, 04:34 PM	#3
MikeN Registered User Join Date: Oct 2007 Location: Marietta, GA Posts: 805	Re: 64 C10 Radiator Core Support Question Thank you sir!

10-17-2023, 10:26 PM	#4
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,488	Re: 64 C10 Radiator Core Support Question I drove up to Auto Metal Direct in Gainesville, GA, to pick mine up a couple years ago. Fit nicely with all my other original sheet metal. I would buy a new one again if I was repairing crash damage or replacing a super rusty original __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

10-18-2023, 12:17 PM	#5
Justin71105 Registered User Join Date: Dec 2019 Location: Greer Sc Posts: 252	Re: 64 C10 Radiator Core Support Question Also have the Auto Metal Direct core support, fit fine no real issues. __________________ 1964 C10 Rusto-mod 5.3L - L59

10-19-2023, 10:36 AM	#6
MikeN Registered User Join Date: Oct 2007 Location: Marietta, GA Posts: 805	Re: 64 C10 Radiator Core Support Question Thanks guys. Summit Racing has them in stock, manufactured by Goodmark, and it has 5 star reviews on their site. They deliver for free - i might go that route.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.