1966 c50 soon to be a longbed - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Palf70Step** · 10-02-2011, 10:13 PM

Very nice Dino.

Dinos63 · 10-02-2011, 11:09 PM

thanks this was my 67 c50 i did i sold a few months back

63KC50NAPCO4X4 · 02-27-2012, 11:53 PM

great builds I want to try this on my 63 K50 I would like to try a swb stepside
bed I was thinking to strech bed width if I keep it dull wheel. but not sure if I
will keep it dully. I do want to run at least a 44 under it and not sure on the
10 hole rims yet? any ideas on rims to use it has 20s now split rims. any ideas and do you all think this is even posibble? I got my idea from the green
on out of canada that everyone loves on the site. It is alot newer than mine
but still same idea. I could use a flat bed but would like to do a swb just to be different, what do you all think? thanks

Dinos63 · 02-28-2012, 12:47 AM

Quote:

Originally Posted by 63KC50NAPCO4X4

great builds I want to try this on my 63 K50 I would like to try a swb stepside
bed I was thinking to strech bed width if I keep it dull wheel. but not sure if I
will keep it dully. I do want to run at least a 44 under it and not sure on the
10 hole rims yet? any ideas on rims to use it has 20s now split rims. any ideas and do you all think this is even posibble? I got my idea from the green
on out of canada that everyone loves on the site. It is alot newer than mine
but still same idea. I could use a flat bed but would like to do a swb just to be different, what do you all think? thanks

well i seen them in a short bed but i like the long bed for the big truck look and feel(if that makes sense) the wheels are going to be a challenge that 10 lug is hard to find in that small patern, you can still buy tires for the wheel you have

63KC50NAPCO4X4 · 02-28-2012, 01:40 AM

Quote:

Originally Posted by Dinos63

well i seen them in a short bed but i like the long bed for the big truck look and feel(if that makes sense) the wheels are going to be a challenge that 10 lug is hard to find in that small patern, you can still buy tires for the wheel you have

do you have any photos of the swb models I cant find any just the lwb and
I may do the lwb just still trying to make a decision? I saw a site where I
could get the 10 hole military rims, do you know if they will fit? thanks

66-PMD-GMC · 02-28-2012, 11:50 AM

Quote:

Originally Posted by Dinos63

well i seen them in a short bed but i like the long bed for the big truck look and feel(if that makes sense) the wheels are going to be a challenge that 10 lug is hard to find in that small patern, you can still buy tires for the wheel you have

Short beds on those trucks look completely out of proportion. IMO
There are wheel adaptors available.
I would trade my Pro-Street project for one C60/50 cab and chassis...
thats fo-sho

MrBeast · 12-14-2023, 03:15 PM

I know this thread is more than 10 years old, what did you ever wind up doing with her?

10-02-2011, 10:13 PM	#151
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,221	Re: 1966 c50 soon to be a longbed Very nice Dino. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

10-02-2011, 11:09 PM	#152
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: 1966 c50 soon to be a longbed thanks this was my 67 c50 i did i sold a few months back Attached Images __________________ CHEVY ONLY... Nothin Else !

02-27-2012, 11:53 PM	#153
63KC50NAPCO4X4 Registered User Join Date: Feb 2012 Location: virginia Posts: 25	Re: 1966 c50 soon to be a longbed great builds I want to try this on my 63 K50 I would like to try a swb stepside bed I was thinking to strech bed width if I keep it dull wheel. but not sure if I will keep it dully. I do want to run at least a 44 under it and not sure on the 10 hole rims yet? any ideas on rims to use it has 20s now split rims. any ideas and do you all think this is even posibble? I got my idea from the green on out of canada that everyone loves on the site. It is alot newer than mine but still same idea. I could use a flat bed but would like to do a swb just to be different, what do you all think? thanks __________________ 1972 GMC Jimmy 350 AT 308s 68 front clip 1971 K5 Blazer 1/2 cab IL6 4speed 410s 1957 SWB 283 3 on tree stepside 1966 LWB 4x4 350 3 on tree 373s 1963 KC50 1.5 ton napco 292 IL6 4speed 617s 1979 K30 1ton 4x4 350 4speed 456s

12-14-2023, 03:15 PM	#157
MrBeast high-Tech Red Neck Join Date: Feb 2008 Location: Livingston, MT/On my boat WA/BC/AK Posts: 2,294	Re: 1966 c50 soon to be a longbed I know this thread is more than 10 years old, what did you ever wind up doing with her? __________________ "He used to be a pretty nice feller, now he's a welder!"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.