69 GMC Door Handle assembly - The 1947 - Present Chevrolet & GMC Truck Message Board Network

toppdawg46 · 03-27-2024, 07:42 PM

Just wrapping up the resto-mod on my 1969 GMC pickup, looking to install a Retro-fit Power Door Locking Kit with Remote Start sensor. I plan on keeping/using the original door handles...Any recommendations? Best sources, etc. If anybody's tried this I would appreciate any advice about significant issues I might run into....successful or not...Thanks much!

**1970cstblazer** · 03-28-2024, 08:06 AM

NOS GM is best quality, but due to age, some are shelf worn, and need rechroming for high end builds.

Look for part numbers 3927899 and 3927895

**special-K** · 03-28-2024, 09:41 AM

Good luck finding N.O.S. door handles. You will find many claimed to be N.O.S. that are GM Restoration Parts, not Genuine GM. The bar code on the box is the dead give away. Those are reproduction parts, same as other companies, that only GM has legal right to put their part number on and use GM packaging. The same parts can be had at normal pricing from the reproduction parts source of your choice

**1970cstblazer** · 03-28-2024, 11:07 AM

RH as offered by a board vendor:

https://67-72chevytrucks.com/vboard/...d.php?t=823793

LH on Ebay:

https://www.ebay.com/itm/20462518650...Cclp%3A2351460

toppdawg46 · 03-28-2024, 11:49 AM

Thanks for the speedy replies...Just ordered Kit from A-1 Electric...2 Door Power Door Lock & AVI-2101 Keyless Entry. Hope I did right...You guys came through...again! Thanks

03-27-2024, 07:42 PM	#1
toppdawg46 Registered User Join Date: Jul 2009 Location: Genola, Utah Posts: 2	69 GMC Door Handle assembly Just wrapping up the resto-mod on my 1969 GMC pickup, looking to install a Retro-fit Power Door Locking Kit with Remote Start sensor. I plan on keeping/using the original door handles...Any recommendations? Best sources, etc. If anybody's tried this I would appreciate any advice about significant issues I might run into....successful or not...Thanks much!

03-28-2024, 08:06 AM	#2
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 2,093	Re: 69 GMC Door Handle assembly NOS GM is best quality, but due to age, some are shelf worn, and need rechroming for high end builds. Look for part numbers 3927899 and 3927895 __________________ 1970 K/5 Blazer CST 4WD, TOTM winner December 2024! Medium Bronze poly, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD Kelsey Hayes wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1970 K20, To be a clone of my Grandfather's K20, Dark Blue poly, 350, 4 speed, 16.5" X 8.25" Kelsey Hayes wheel option, tilt, tach, vacuum, AM radio. Latest project truck 1972 Cheyenne Super 20 2WD, Dark Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 46k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 67k miles, 3.6, 8L45, 3.23 LS, 18" wheels Last edited by 1970cstblazer; 03-28-2024 at 08:28 AM.

03-28-2024, 09:41 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 69 GMC Door Handle assembly Good luck finding N.O.S. door handles. You will find many claimed to be N.O.S. that are GM Restoration Parts, not Genuine GM. The bar code on the box is the dead give away. Those are reproduction parts, same as other companies, that only GM has legal right to put their part number on and use GM packaging. The same parts can be had at normal pricing from the reproduction parts source of your choice __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-28-2024, 11:07 AM	#4
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 2,093	Re: 69 GMC Door Handle assembly RH as offered by a board vendor: https://67-72chevytrucks.com/vboard/...d.php?t=823793 LH on Ebay: https://www.ebay.com/itm/20462518650...Cclp%3A2351460 __________________ 1970 K/5 Blazer CST 4WD, TOTM winner December 2024! Medium Bronze poly, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD Kelsey Hayes wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1970 K20, To be a clone of my Grandfather's K20, Dark Blue poly, 350, 4 speed, 16.5" X 8.25" Kelsey Hayes wheel option, tilt, tach, vacuum, AM radio. Latest project truck 1972 Cheyenne Super 20 2WD, Dark Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 46k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 67k miles, 3.6, 8L45, 3.23 LS, 18" wheels

03-28-2024, 11:49 AM	#5
toppdawg46 Registered User Join Date: Jul 2009 Location: Genola, Utah Posts: 2	Re: 69 GMC Door Handle assembly Thanks for the speedy replies...Just ordered Kit from A-1 Electric...2 Door Power Door Lock & AVI-2101 Keyless Entry. Hope I did right...You guys came through...again! Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.