![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Junior Member
![]() Join Date: Jun 2016
Location: Shelbyville, TN
Posts: 57
|
Re: 69 Chevy C-10 Cab Mounts
Thank you all for the replies. I did not buy the new cab mount kit I used from LMC....it same one that Brothers Trucks sells but I found it somoeone else that included the Radiator Mounts too. My cab sat a little more than 1/2 inch lower that the bed line. So...I hunted for three weeks to find more spacers that were the same diameter as the rubber bushings...I had to use four at each corner to get the cab up to line up with the bed line. It looks right on the money as far as the lines...and it even looks level when checking the cab across the top of the cab side of the bed. But...I just thought that was a lot of shims compared to what came out. As I said the rad support is out of the truck..so I will see when I get that back in with the new mounts.
Question is...will I need four spacers for the rad mounts also? It only had one in it originally and it did look original. BTW....frame has been checked and it has no previous damage. So does anyone else think four spacers is way too much? Thanks, MikeM
__________________
Michael Miller Tennessee 1969 Chevy C-10 Custom 2015 Chevy Colorado |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|