5 Lug Conversion Axles for $74 Bucks Each - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**dmjlambert** · 11-23-2024, 01:38 PM

I went through the conversion on my 1969 CST/10 and got the Motive Gear MG6569 axle shafts. According to Q&A on Summit’s site that says the brake pilot is 3.06" and I measured the hole in the 71 brake drum at 3-1/8. So, they fit fine. The price of these shafts is fine through Summit, Amazon, or who I bought them from was National Drivetrain's listing on eBay. The price seems to change frequently. Here is my thread with info you might like to see:
https://67-72chevytrucks.com/vboard/...07#post9041807

11-23-2024, 01:38 PM	#20
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,894	Re: 5 Lug Conversion Axles for $74 Bucks Each I went through the conversion on my 1969 CST/10 and got the Motive Gear MG6569 axle shafts. According to Q&A on Summit’s site that says the brake pilot is 3.06" and I measured the hole in the 71 brake drum at 3-1/8. So, they fit fine. The price of these shafts is fine through Summit, Amazon, or who I bought them from was National Drivetrain's listing on eBay. The price seems to change frequently. Here is my thread with info you might like to see: https://67-72chevytrucks.com/vboard/...07#post9041807 Last edited by dmjlambert; 11-23-2024 at 01:54 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.