77 Chevy K10 Silverado Build - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bmchevy1979 · 08-31-2015, 08:58 PM

First would probably be manifolds or headers with smog tubes a smog pump and it shouldn't require a Cat because of the heavy duty suspension Headers must be CARB approved and always seams to change as to which are legal and having the sticker with the CARB certified number helps a lot. intake is probably the original you will need the original style air cleaner with functional heat tube to manifold or header that's all I can think of off the top of my head

Chevrolado · 09-04-2015, 08:35 PM

Quote:

Originally Posted by bmchevy1979

First would probably be manifolds or headers with smog tubes a smog pump and it shouldn't require a Cat because of the heavy duty suspension Headers must be CARB approved and always seams to change as to which are legal and having the sticker with the CARB certified number helps a lot. intake is probably the original you will need the original style air cleaner with functional heat tube to manifold or header that's all I can think of off the top of my head

Awesome.. thanks for the insight and information.

Chevrolado · 12-05-2024, 06:25 PM

Unfortunately all my old photos appear to have been compromised and removed.. But almost 10 years later... we're restarting this again.

CA truck has now been moved to TX and the process has started. Pickin away at things as I find the time.

08-31-2015, 08:58 PM	#26
bmchevy1979 Registered User Join Date: Dec 2010 Location: Visalia, Ca Posts: 707	Re: 77 Chevy K10 Silverado Build First would probably be manifolds or headers with smog tubes a smog pump and it shouldn't require a Cat because of the heavy duty suspension Headers must be CARB approved and always seams to change as to which are legal and having the sticker with the CARB certified number helps a lot. intake is probably the original you will need the original style air cleaner with functional heat tube to manifold or header that's all I can think of off the top of my head __________________ <Brandon> 1974 Chevrolet K5 Blazer 350sbc/SM465/NP205, dana44 front, corp 14bolt rear with 4.10s and a powertrax locker, custom rear bumper 400sbc in the works. 1981 GMC C1500 stepside 250i6, 3spd, 12bolt with 3.08s 2.5/4drop on 15x10 with 275/50r15 81 GMC C3500 cab-chassis dually with utility bed 350sbc, Sm465, 14bolt with 4.10s nv4500 getting ready to go in 1979 Chevrolet K5 R.I.P. http://67-72chevytrucks.com/vboard/s...d.php?t=434096 1976 Chevrolet C10 R.I.P. http://67-72chevytrucks.com/vboard/s...d.php?t=434195

12-05-2024, 06:25 PM	#28
Chevrolado Registered User Join Date: Nov 2012 Location: McKinney, TX Posts: 114	Re: 77 Chevy K10 Silverado Build Unfortunately all my old photos appear to have been compromised and removed.. But almost 10 years later... we're restarting this again. CA truck has now been moved to TX and the process has started. Pickin away at things as I find the time. __________________ Dave - 1977 Chevy K10 - 1997 3000GT - 2006 Chevy 1500 Z71 Last edited by Chevrolado; 12-05-2024 at 07:17 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.