|
09-12-2004, 08:55 PM
|
#1 |
|
Registered User
Join Date: Apr 2004
Location: Indy
Posts: 21
|
Dash ?
The dash in my blazer has been cut for an aftermarket radio. A friend of mine just gave me a parts pick-up with a uncut dash. How hard is it to change out? Thanks Ed
|
|
|
|
09-12-2004, 09:45 PM
|
#2 |
|
Registered User
Join Date: Jun 2002
Location: Knoxville Tenn.
Posts: 3,058
|
Not bad if you have a welder. Remove the 3 bolts on each side-remove dash pad-cut dash along where holes are-cut new dash in the same place-bolt back in and just tack weld the dash down the line of holes-does not have to be perfect as it will be no see.
__________________
56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer |
|
|
|
|
09-12-2004, 10:12 PM
|
#3 |
|
Account Suspended
Join Date: Sep 2000
Posts: 3,991
|
At the sides where it bolts in it might be spot welded there, some are some aren't. It took me a couple hours to get the spot welds undone on mine, you can't get a drill in there, I ended up pealing the metal apart to get the old dash out.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
