Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
10-09-2004, 12:23 AM | #1 |
Registered User
Join Date: Jun 2003
Location: Clovis New Mexico
Posts: 50
|
A dumb question about add a leafs
hey guys this might sound dumb but I bopught some add a leafs for my blazer last weekend at a flea market. they were the front an back leafs they were still new in the boxi gave 20 bucks for them.The lable on the box said they were for the 73-up solid axle blazer. One set of leafs are really short and the others are alot longer. My question is which are the front and which are the backones. I never thought to ask the guy and the box dont say. the short ones are about 24 inches and the longer ones are about 36 inches only guessing dont have a tape as i type this. I need your alls help. I would really appriciate it.
__________________
1972 chevy SWB 396 big block all for now more to come soon. |
10-09-2004, 10:05 AM | #2 |
just can't cover up my redneck
Join Date: May 2004
Location: Columbus OH
Posts: 11,414
|
The long ones are for the front and the shorter (thicker) pair go on the rear.
The fronts go on the bottom of the stack. The rear leaves fit somewhere up in the stack a little. Put them so that they go in steps with the others. They should not have any shorter leaves above them. Large C clamps will help tremendously.... Last edited by LONGHAIR; 10-09-2004 at 10:09 AM. |
10-09-2004, 09:19 PM | #3 |
Registered User
Join Date: Jun 2003
Location: Clovis New Mexico
Posts: 50
|
Thanks longhair I was really sweating it. I would have theought that the short ones went on the front. Guess is a good thing that I asked youall. thanks again.
__________________
1972 chevy SWB 396 big block all for now more to come soon. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|