Post Pics of your Static Drops!! - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Fastest32 · 10-14-2013, 04:20 PM

Quote:

Originally Posted by Ospguy

Z'd front and rear suspension plus a 3 " spring drop on rear. Lot's of work but full suspension travel and drives like a new truck.......

So beautiful.

forestb · 10-14-2013, 04:22 PM

Quote:

Originally Posted by Ospguy

Z'd front and rear suspension plus a 3 " spring drop on rear. Lot's of work but full suspension travel and drives like a new truck.......

Awesome truck. what is that on the tailgate and can we get a closer photo of it?

Ospguy · 10-14-2013, 04:32 PM

The bed is boxed in - solid tail piece (no tailgate). The panels are aluminum that I had machined to match the fins on an M/T Valve Cover. Panels are recessed into the tail piece. I'll see If I have a better pic and will post.

Ospguy · 10-14-2013, 04:57 PM

Few more pics.

TxRat · 10-14-2013, 09:25 PM

4-6 drop

Fastest32 · 10-14-2013, 11:46 PM

Quote:

Originally Posted by TxRat

4-6 drop

Sweet.

familyfast64 · 10-15-2013, 04:57 PM

I'm posting again, at least I think I already posted, because I've learned more about what is actually under it since the trade...

Drop spindles -2.5" cheap single piston...I think 75 mm, stops alright tho.
Drop springs? Still unsure but the front cross member is only about 3.5-4 inches from the ground.
9" ford rear end with leaf springs under Axel tubes
Air shocks with the upper mount relocated(not enough imo)
There's prolly 2"-3.5" depending on psi in air shock between Axle tube and frame. Also the same distance between to of rear end housing and floor. If the shocks are empty or low it'll bottom out but it does good when there's a lil psi added. She does lean to the back passenger side a lil, I'm assuming it's just worn leaf springs..?..
Anyway, I want to get seat belts, then some good sway bars for sure.

C/10 King · 10-15-2013, 07:00 PM

7/8

AllenKarber · 10-24-2013, 01:54 PM

Quote:

Originally Posted by Ospguy

Z'd front and rear suspension plus a 3 " spring drop on rear. Lot's of work but full suspension travel and drives like a new truck.......

Sharp truck my man!!

This whole thread is full of them!

19666Trucker · 10-25-2013, 04:13 AM

1.5 cut coils in the front, cut .5 in the back with 2" blocks 1966 c20 custom camper daily driver.

Desert.Chevy · 02-01-2014, 12:22 PM

Quote:

Originally Posted by TxRat

4-6 drop

Good Looking Truck.
How did you drop it 4/6, parts or cut?
What size tires do you have?

endlessearth · 11-22-2014, 12:49 AM

Finally got that low and level look that I was seeking.

endlessearth · 11-26-2014, 12:43 PM

And again...but now with smaller diameter tires.

endlessearth · 11-27-2014, 02:18 AM

Still working it...

**60-66** · 11-27-2014, 09:32 AM

Quote:

Originally Posted by endlessearth

Still working it...

Really starting to like the lowered longbed look, Very nice truck there Endlessearth , love your style !

endlessearth · 11-27-2014, 12:01 PM

Quote:

Originally Posted by 60-66

Really starting to like the lowered longbed look, Very nice truck there Endlessearth , love your style !

Thanks man! I think that a long bed that has been lowered and has a very flat stance (with little or no rake) is a pretty cool look.

of13swc · 12-14-2014, 12:34 PM

Beautiful truck. Awesome job.

Quote:

Originally Posted by DaddyMack

Mine is torsion bars...

2.5 inch drop spindles in front and 5"drop coils in rear. that's all.. no frame cutting or anything...

carp1329 · 12-15-2014, 08:27 PM

64 with spindles and 1" springs in front 5" springs in back.Tires are 235/75/15 on van rallies and truck rallies in the first picture.

rusty1962 · 12-16-2014, 10:14 PM

My 62. when I bought it it had the torsion bars cranked all of the way out and heated springs in the rear. 2nd pic is matching set of tires still same height, 3rd picture is with 2 1/2 inch Western Suspension Drop Spindles, 10 rounds back in the Torsion bars, Same heated springs rear with 18x8 with 235/50/18 on the front and 18x 9 1/2 255/55/18 on the rear.

LostMy65 · 12-16-2014, 10:37 PM

Quote:

Originally Posted by rusty1962

My 62. when I bought it it had the torsion bars cranked all of the way out and heated springs in the rear. 2nd pic is matching set of tires still same height, 3rd picture is with 2 1/2 inch Western Suspension Drop Spindles, 10 rounds back in the Torsion bars, Same heated springs rear with 18x8 with 235/50/18 on the front and 18x 9 1/2 255/55/18 on the rear.

It's amazing how much wheels make all the difference.

Monte's62 · 12-18-2014, 05:46 PM

rusty1962, man you got it right in that 3rd pic. The stance looks good and as mentioned, those wheels make a difference.

rusty1962 · 12-18-2014, 06:02 PM

Thanks, Lot of work already done you can't see but Still Long way to Go!!!

endlessearth · 12-18-2014, 06:43 PM

I like that last truck with the moon discs on it. I guess I am partial to those.

contagious102 · 12-19-2014, 09:05 PM

Just finished mine in July. Some where around 6" in the front, 6' to 8" in the rear. 540ci big block.

endlessearth · 12-19-2014, 09:19 PM

Bad ass!

10-14-2013, 04:32 PM	#228
Ospguy Registered User Join Date: Oct 2013 Location: Zachary, LA Posts: 6	Re: Post Pics of your Static Drops!! The bed is boxed in - solid tail piece (no tailgate). The panels are aluminum that I had machined to match the fins on an M/T Valve Cover. Panels are recessed into the tail piece. I'll see If I have a better pic and will post.

10-14-2013, 04:57 PM	#229
Ospguy Registered User Join Date: Oct 2013 Location: Zachary, LA Posts: 6	Re: Post Pics of your Static Drops!! Few more pics. Attached Images

10-14-2013, 09:25 PM	#230
TxRat Registered User Join Date: Dec 2010 Location: Beaumont Texas Posts: 190	Re: Post Pics of your Static Drops!! 4-6 drop

10-15-2013, 04:57 PM	#232
familyfast64 Registered User Join Date: Sep 2013 Location: Cheney, Kansas Posts: 337	Re: Post Pics of your Static Drops!! I'm posting again, at least I think I already posted, because I've learned more about what is actually under it since the trade... Drop spindles -2.5" cheap single piston...I think 75 mm, stops alright tho. Drop springs? Still unsure but the front cross member is only about 3.5-4 inches from the ground. 9" ford rear end with leaf springs under Axel tubes Air shocks with the upper mount relocated(not enough imo) There's prolly 2"-3.5" depending on psi in air shock between Axle tube and frame. Also the same distance between to of rear end housing and floor. If the shocks are empty or low it'll bottom out but it does good when there's a lil psi added. She does lean to the back passenger side a lil, I'm assuming it's just worn leaf springs..?.. Anyway, I want to get seat belts, then some good sway bars for sure. Attached Images __________________ Live and let live Last edited by familyfast64; 10-15-2013 at 05:03 PM.

10-15-2013, 07:00 PM	#233
C/10 King Registered User Join Date: Feb 2009 Location: A****er, CA Posts: 5,594	Re: Post Pics of your Static Drops!! 7/8 Attached Images __________________ C/10 Rene 1966 Short Fleet "The Hag" 1967 CST Short Fleet "Dark Poly" 1971 Short Fleet 1970 Jimmy Custom 2 WD "Golden Ticket" 1972 Blazer 2 WD "Retro Blaze"

10-25-2013, 04:13 AM	#235
19666Trucker Registered User Join Date: May 2013 Location: Scottsdale, Az Posts: 245	Re: Post Pics of your Static Drops!! 1.5 cut coils in the front, cut .5 in the back with 2" blocks 1966 c20 custom camper daily driver. Attached Images

11-22-2014, 12:49 AM	#237
endlessearth Registered User Join Date: May 2013 Location: Scottsdale, AZ Posts: 373	Re: Post Pics of your Static Drops!! Finally got that low and level look that I was seeking.

11-26-2014, 12:43 PM	#238
endlessearth Registered User Join Date: May 2013 Location: Scottsdale, AZ Posts: 373	Re: Post Pics of your Static Drops!! And again...but now with smaller diameter tires.

11-27-2014, 02:18 AM	#239
endlessearth Registered User Join Date: May 2013 Location: Scottsdale, AZ Posts: 373	Re: Post Pics of your Static Drops!! Still working it...

12-15-2014, 08:27 PM	#243
carp1329 Registered User Join Date: Sep 2013 Location: Lone Jack Missouri Posts: 36	Re: Post Pics of your Static Drops!! 64 with spindles and 1" springs in front 5" springs in back.Tires are 235/75/15 on van rallies and truck rallies in the first picture. Attached Images

12-16-2014, 10:14 PM	#244
rusty1962 Registered User Join Date: Nov 2014 Location: Cullman, AL Posts: 2	Re: Post Pics of your Static Drops!! My 62. when I bought it it had the torsion bars cranked all of the way out and heated springs in the rear. 2nd pic is matching set of tires still same height, 3rd picture is with 2 1/2 inch Western Suspension Drop Spindles, 10 rounds back in the Torsion bars, Same heated springs rear with 18x8 with 235/50/18 on the front and 18x 9 1/2 255/55/18 on the rear. Attached Images

12-18-2014, 05:46 PM	#246
Monte's62 Registered User Join Date: Dec 2013 Location: Dallas Ga Posts: 308	Re: Post Pics of your Static Drops!! rusty1962, man you got it right in that 3rd pic. The stance looks good and as mentioned, those wheels make a difference.

12-18-2014, 06:02 PM	#247
rusty1962 Registered User Join Date: Nov 2014 Location: Cullman, AL Posts: 2	Re: Post Pics of your Static Drops!! Thanks, Lot of work already done you can't see but Still Long way to Go!!!

12-18-2014, 06:43 PM	#248
endlessearth Registered User Join Date: May 2013 Location: Scottsdale, AZ Posts: 373	Re: Post Pics of your Static Drops!! I like that last truck with the moon discs on it. I guess I am partial to those.

12-19-2014, 09:05 PM	#249
contagious102 Registered User Join Date: May 2012 Location: Semmes,Al. Posts: 407	Re: Post Pics of your Static Drops!! Just finished mine in July. Some where around 6" in the front, 6' to 8" in the rear. 540ci big block. __________________ Go Fast and Have Fun.!! My pro street build, http://67-72chevytrucks.com/vboard/s...d.php?t=551185 Last edited by contagious102; 12-20-2014 at 09:58 AM.



Register or Log In To remove these advertisements.

12-19-2014, 09:19 PM	#250
endlessearth Registered User Join Date: May 2013 Location: Scottsdale, AZ Posts: 373	Re: Post Pics of your Static Drops!! Bad ass!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.