started working on the 65 suburban

[csa daddy]

I need to just come up there an help ya put it the rest of the way together an work off some of what I owe ya lol . Looks good though I been side lined try to get my 91 sub back together huh instead of buying a fuel pressure gauge an regulator I'm going to just switch it all out fuel system an all an put my dads ol 6.2 diesel motor an trans out of his ol sub into mine been after it for awhile an finally convinced him to let me have it so. I'm switching the gas for the diesel now has a six inch lift 35 swampers tons front an rear with 4:56 gears detroit locker in rear slowly pulling my front axle together just need king pin rebuilds an wheel bearings an wheel studs plus tierod an backing plate will try to post a pic for ya later . Give me a shout an we will catch up
Posted via Mobile Device

[gostranger]

Wow it sounds like you have your hands full! You still want me to hold all that stuff for you? let me know thanks
Posted via Mobile Device

[RockTonka]

Looking good Dave!! I like the intake tubes stretching out like that.

We got ours roadworthy and I put at least a 100 miles on it running around town today...really digging it.

[gostranger]

Originally Posted by RockTonka

Looking good Dave!! I like the intake tubes stretching out like that.

We got ours roadworthy and I put at least a 100 miles on it running around town today...really digging it.

Hey thanks on the intake tubes I will dial the setup in it will look a little better

great to hear that the suburban is going good the things you are doing are nice improvements!!!!!
Posted via Mobile Device

[csa daddy]

Yeah I still want the stuff from ya just wish I could get a month of 40 hour weeks an I would be just about payed up to everybody . Just can't make it fast enough
Posted via Mobile Device

[protrash64]

Looking awesome GO!!! Cant wait to see some more.

[gostranger]

Originally Posted by protrash64

Looking awesome GO!!! Cant wait to see some more.

Hey thanks

it looks like you have made some progress on yours too
Posted via Mobile Device

[gostranger]

quick update fitted the inner fender but it looks like i have to cut it and widen it and still have to figure out how i am going to attach it

[Dinos63]

Originally Posted by gostranger

Hey thanks!

hopefully i will pick up steam on progress if my back holds up and the weather keeps getting better!!!!

i was going to ask you how your backs doing??

[gostranger]

Originally Posted by Dinos63

i was going to ask you how your backs doing??

Thanks for asking!!
well i had 3 shots in my back late fall that helped(but sucked!!!) now i am getting tingling in my whole left leg and foot i have been going to a chyropractor 2 to 3 times a week but he just last week said i need to go back to my regular doctor so we will see the weather is great here now and i want to get to work!!!!


hows the new location?are the kids taking over enough for you to have more time??

[c.brown]

that thing will be able to breath that inner fender looks like a nice fit looking good

[gostranger]

Originally Posted by c.brown

that thing will be able to breath that inner fender looks like a nice fit looking good

Thanks curt

you have to have a few updates on your suburban by now!!!!!
Posted via Mobile Device

[csa daddy]

Dave I feel ya on the back pain I'm not but 32 but my back feels more like 70 . Plus my pops he has dig discs in his back so I know all about the back issues I hope yours gets well enough to finish your sub. Good luck Chad
Posted via Mobile Device

[gostranger]

Originally Posted by csa daddy

Dave I feel ya on the back pain I'm not but 32 but my back feels more like 70 . Plus my pops he has dig discs in his back so I know all about the back issues I hope yours gets well enough to finish your sub. Good luck Chad
Posted via Mobile Device

Nothing is going to stop me from finishing the suburban at this point thanks on the back I just take it back a notch and keep going!
Posted via Mobile Device

[csa daddy]

That's about all ya can do
Posted via Mobile Device

[C@rnut001]

You have a great looking suburban here and I really like what you are doing to it. Keep at it and hopefully your back will let you continue on. I know about back issues, as my older brother has a bad back (crushed discs as a teenager) and it has affected his own truck and car builds over the years. Keep up the updates as you can and hopefully you will be able to get it running down the road soon!

[gostranger]

Originally Posted by csa daddy

That's about all ya can do
Posted via Mobile Device

I will keep at it thanks!!!
Posted via Mobile Device

[gostranger]

Originally Posted by C@rnut001

You have a great looking suburban here and I really like what you are doing to it. Keep at it and hopefully your back will let you continue on. I know about back issues, as my older brother has a bad back (crushed discs as a teenager) and it has affected his own truck and car builds over the years. Keep up the updates as you can and hopefully you will be able to get it running down the road soon!

Thanks lot for the encouraging words on the truck and back!!!I am glad there are some people that like what I am doing with the suburban I will keep at it so stay tuned more to come I will do my best to keep pics comming !!!
Posted via Mobile Device

[gostranger]

my new tires for the rear showed up!!

[csa daddy]

Nice
Posted via Mobile Device

[gostranger]

Originally Posted by csa daddy

Nice
Posted via Mobile Device

hey thanks!

did you get that suburban going?

[gostranger]

here is a couple more pics of the inner fender i am trying to fit in the front i think i am going to widen it to make it work better.

i am using the porterbuilt front end to narrow the front but i am still very close to the fender and the hood not much turning room i am going to have to try to figure out a way to get some more turning room! any one with any ideas i am all ears!!!!!

[c.brown]

really liking that inner fender idea, im having the same problem with the front clearence changed the backspacing i was given came in 1'' and still not much room for turning i thought the dropmember was supposed to be narrowed 2''

[gostranger]

Originally Posted by c.brown

really liking that inner fender idea, im having the same problem with the front clearence changed the backspacing i was given came in 1'' and still not much room for turning i thought the dropmember was supposed to be narrowed 2''

I guess I am not the only one having clearance issues I wonder how many other people are having them? I figured running the dropmember I was going to pickup more clearance than I have? I already trimmed about 1" off the lip of each fender but it looks like I will have to cut into the fender more and into the lip of the hood!!! To get any turning while driving which is the whole point for my build!
Posted via Mobile Device

[gostranger]

ok i got all the valves plumed and wired inran it out side to see what it looked liked aired ou and aired out looks like it sits good layed out looks like a 4wd aired up probably wouldnt drive it aired up that much it would be a stiff ride anyway more progress!!