What did you do to your truck today? - Page 118 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

boat · 05-01-2011, 05:50 PM

Got my motor running

geezer#99 · 05-01-2011, 07:37 PM

Went for a yard of dirt for the new windmill palm for the backyard.
Drove like a boat. Tail draggin'.

willyp · 05-01-2011, 08:43 PM

thats good work boat, clean!

got my bed done last night. took it to the dogwod fest today.

evobuilder · 05-01-2011, 09:30 PM

wow your bed floor looks awesome. I am starting on mine (raised 5 inches) and would be considder myself lucky as hell if mine comes out this nice.

Driveway Dreams · 05-01-2011, 11:35 PM

I can finally post something here! I started cleaning the rear area of my Burb out. I found a ton of magazines, majority of which are still readable. A lot of National Geographic, some Wyoming Wildlife, and some other misc magazines. All from the late 60s to the early 80s. There was even a National Geographic from 1969...the issue from when we landed on the moon. There was some old parts too. Sorry I didn't take pics. I was just trying to make progress.

jbgroby · 05-02-2011, 10:42 PM

I got a friend to pop over so we could put on the PS inner fender. One more piece down, 99 others next!

rafasbadhabit · 05-03-2011, 01:37 AM

finish the the fuel pump and put in the new radiator, got my white walls installed,well i did it all this weekend, but today I took her all over the place and she ran beautiful.

knuckledragger · 05-03-2011, 01:47 PM

Replace the rear shocks with a set of old stock monroe magnums.They were originally for the front of a 70-96 g van.Work great with the 5" drop.

Vernski · 05-03-2011, 02:15 PM

Quote:

Originally Posted by willyp

thats good work boat, clean!

got my bed done last night. took it to the dogwod fest today.

Willyp where did you get your wood and what stain and finish did you use thanx....Vernski

Vernski · 05-03-2011, 02:22 PM

Quote:

Originally Posted by jbgroby

I got a friend to pop over so we could put on the PS inner fender. One more piece down, 99 others next!

Lookin good Jake nice & clean...Vernski

Vernski · 05-03-2011, 03:48 PM

Finally got some shots of my rockers & doors I painted a few days ago rockers are a little rough but they will be under the rug & sound shield anyway they are rock solid and will not leak, both sides were replaced....Vernski

61_FL_Apache · 05-03-2011, 03:58 PM

I will be replacing my rear brakes and wheel cylinders later today.

**slepysal** · 05-03-2011, 04:02 PM

wash and waxed

LeftCoast32 · 05-03-2011, 05:32 PM

Here are the pictures of everything back from Media Blasting

The Cab - Needs a little work in the floors from setting for so long. It is not bad just needs a little attention.

The Doors - Couple of small dents, no rust at all.

The Hood - Needs a little straightening, no rust at all.

The Cowl - Perfectly straight, no rust at all.

The Fenders - Perfectly Straight, no rust at all.

The Grill - Perfectly Straight, no rust at all.

LeftCoast32 · 05-03-2011, 08:09 PM

Here is the Vac and Tach Gauge Cluster I have been working on for it. Still waiting for the Gauge Surround to get back from Chrome Plating.

61_FL_Apache · 05-03-2011, 08:41 PM

I like it!!

MalibuKasey · 05-03-2011, 10:34 PM

Quote:

Originally Posted by LeftCoast32

Here is the Vac and Tach Gauge Cluster I have been working on for it. Still waiting for the Gauge Surround to get back from Chrome Plating.

SOOOOOOOOOOOOOOOOO
Where did you get THAT???

LeftCoast32 · 05-03-2011, 10:44 PM

Quote:

Originally Posted by MalibuKasey

SOOOOOOOOOOOOOOOOO
Where did you get THAT???

It is a combination of 3 different Gauge Clusters, a Tac/Transmitter and Vac purchased off evil-bay and an NOS Temp Gauge.

jimmydean · 05-03-2011, 10:47 PM

Got my center stage mocked up.

willyp · 05-03-2011, 10:51 PM

Quote:

Originally Posted by Vernski

Willyp where did you get your wood and what stain and finish did you use thanx....Vernski

the oak was in the truck but was in bad shape, it had alot of water damage. chemically strip it then belt sanded, finish sanded. used cabot ebony wood stain with 4 coats of gloss cabot spar varnish from lowes.

Revoh · 05-04-2011, 08:51 AM

Quote:

Originally Posted by rafasbadhabit

finish the the fuel pump and put in the new radiator, got my white walls installed,well i did it all this weekend, but today I took her all over the place and she ran beautiful.

Looks good!

chainsaw · 05-05-2011, 04:05 PM

Scrapped off 46 years of paint, road grime and undercoating under drivers fender. Fenders are still on truck, scraped by hand, no power tools. Can barley move my right arm but making progress while waiting on parts.

sams60gmc · 05-05-2011, 07:52 PM

Today I machined a DD in my steering shaft, then cut a piece of stress proof and put a DD on that aswell. If I remember tomorrow I'll finish my rack standoffs so I can start to finish the steering.

6863m · 05-05-2011, 09:16 PM

I finished the rebuilding of both wing window assemblies and installed the drivers side door window and internal parts. I will do the Passenger side tomorrow.

198plus · 05-05-2011, 09:24 PM

This is way nice !!!!!!!!!!!!

Quote:

Originally Posted by LeftCoast32

Here are the pictures of everything back from Media Blasting

The Cab - Needs a little work in the floors from setting for so long. It is not bad just needs a little attention.

The Doors - Couple of small dents, no rust at all.

The Hood - Needs a little straightening, no rust at all.

The Cowl - Perfectly straight, no rust at all.

The Fenders - Perfectly Straight, no rust at all.

The Grill - Perfectly Straight, no rust at all.

05-01-2011, 05:50 PM	#2926
boat Registered User Join Date: Apr 2010 Location: bartlett Tn Posts: 276	Re: What did you do to your truck today? Got my motor running Attached Images __________________ STEVES 63 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=412554 GIBSON63 YouTube channel https://www.youtube.com/user/1gibsonl4 Last edited by boat; 05-01-2011 at 05:50 PM.

05-01-2011, 07:37 PM	#2927
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,733	Re: What did you do to your truck today? Went for a yard of dirt for the new windmill palm for the backyard. Drove like a boat. Tail draggin'. Attached Images

05-01-2011, 08:43 PM	#2928
willyp Registered User Join Date: Nov 2008 Location: Houston TX Posts: 362	Re: What did you do to your truck today? thats good work boat, clean! got my bed done last night. took it to the dogwod fest today. Attached Images __________________ The price of cool aint cheap.

05-01-2011, 09:30 PM	#2929
evobuilder Registered User Join Date: Sep 2010 Location: Seattle, WA Posts: 39	Re: What did you do to your truck today? wow your bed floor looks awesome. I am starting on mine (raised 5 inches) and would be considder myself lucky as hell if mine comes out this nice. __________________ Evobuilder / Seattle, WA Hub Garage: www.hubgarage.com/mygarage/evobuilder

05-01-2011, 11:35 PM	#2930
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: What did you do to your truck today? I can finally post something here! I started cleaning the rear area of my Burb out. I found a ton of magazines, majority of which are still readable. A lot of National Geographic, some Wyoming Wildlife, and some other misc magazines. All from the late 60s to the early 80s. There was even a National Geographic from 1969...the issue from when we landed on the moon. There was some old parts too. Sorry I didn't take pics. I was just trying to make progress. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

05-02-2011, 10:42 PM	#2931
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: What did you do to your truck today? I got a friend to pop over so we could put on the PS inner fender. One more piece down, 99 others next! Attached Images __________________ http://s1299.photobucket.com/user/jb...23904108567829

05-03-2011, 01:37 AM	#2932
rafasbadhabit Registered User Join Date: Jan 2009 Location: Reedley Posts: 11	Re: What did you do to your truck today? finish the the fuel pump and put in the new radiator, got my white walls installed,well i did it all this weekend, but today I took her all over the place and she ran beautiful. Attached Images

05-03-2011, 01:47 PM	#2933
knuckledragger Registered User Join Date: Aug 2010 Location: Hutto,Texas!! Posts: 160	Re: What did you do to your truck today? Replace the rear shocks with a set of old stock monroe magnums.They were originally for the front of a 70-96 g van.Work great with the 5" drop. __________________ 65 c-10 swb,bbw,step,402/t350,sold!! 1979 c10 Silverado,250,auto,gonna have a 3/5 drop,and twice pipes!Sold Bought the wife a 84 gmc short step

05-03-2011, 03:48 PM	#2936
Vernski Registered User Join Date: May 2009 Location: Rathdrum, Idaho Posts: 1,135	Re: What did you do to your truck today? Finally got some shots of my rockers & doors I painted a few days ago rockers are a little rough but they will be under the rug & sound shield anyway they are rock solid and will not leak, both sides were replaced....Vernski Attached Images

05-03-2011, 03:58 PM	#2937
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: What did you do to your truck today? I will be replacing my rear brakes and wheel cylinders later today. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

05-03-2011, 04:02 PM	#2938
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: What did you do to your truck today? wash and waxed __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

05-03-2011, 05:32 PM	#2939
LeftCoast32 Custom Builder Join Date: Jun 2003 Location: Carlsbad, California Posts: 908	Re: What did you do to your truck today? Here are the pictures of everything back from Media Blasting The Cab - Needs a little work in the floors from setting for so long. It is not bad just needs a little attention. The Doors - Couple of small dents, no rust at all. The Hood - Needs a little straightening, no rust at all. The Cowl - Perfectly straight, no rust at all. The Fenders - Perfectly Straight, no rust at all. The Grill - Perfectly Straight, no rust at all. __________________ 1932 Chevy Roadster Car and Pick-Up - http://67-72chevytrucks.com/vboard/s...d.php?t=465709 1966 K20 Factory 4X4 - http://67-72chevytrucks.com/vboard/s...d.php?t=455484 (Sold) 1972 K5 Blazer (Sold) - http://67-72chevytrucks.com/vboard/s...ad.php?t=87530 2007 TrailBlazer SS - http://67-72chevytrucks.com/vboard/s...34#post4706534 Last edited by LeftCoast32; 05-03-2011 at 06:10 PM.

05-03-2011, 08:09 PM	#2940
LeftCoast32 Custom Builder Join Date: Jun 2003 Location: Carlsbad, California Posts: 908	Re: What did you do to your truck today? Here is the Vac and Tach Gauge Cluster I have been working on for it. Still waiting for the Gauge Surround to get back from Chrome Plating. __________________ 1932 Chevy Roadster Car and Pick-Up - http://67-72chevytrucks.com/vboard/s...d.php?t=465709 1966 K20 Factory 4X4 - http://67-72chevytrucks.com/vboard/s...d.php?t=455484 (Sold) 1972 K5 Blazer (Sold) - http://67-72chevytrucks.com/vboard/s...ad.php?t=87530 2007 TrailBlazer SS - http://67-72chevytrucks.com/vboard/s...34#post4706534

05-03-2011, 08:41 PM	#2941
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: What did you do to your truck today? I like it!! __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

05-03-2011, 10:47 PM	#2944
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: What did you do to your truck today? Got my center stage mocked up. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210



Register or Log In To remove these advertisements.

05-05-2011, 04:05 PM	#2947
chainsaw Registered User Join Date: Jul 2010 Location: Carrollton tx Posts: 216	Re: What did you do to your truck today? Scrapped off 46 years of paint, road grime and undercoating under drivers fender. Fenders are still on truck, scraped by hand, no power tools. Can barley move my right arm but making progress while waiting on parts.

05-05-2011, 07:52 PM	#2948
sams60gmc Registered User Join Date: Sep 2008 Location: Vancouver Washington Posts: 726	Re: What did you do to your truck today? Today I machined a DD in my steering shaft, then cut a piece of stress proof and put a DD on that aswell. If I remember tomorrow I'll finish my rack standoffs so I can start to finish the steering. __________________ 1960 GMC short fleet, full frame build... http://67-72chevytrucks.com/vboard/s...d.php?t=329718

05-05-2011, 09:16 PM	#2949
6863m Registered User Join Date: Feb 2009 Location: Alpine Ca, Posts: 123	Re: What did you do to your truck today? I finished the rebuilding of both wing window assemblies and installed the drivers side door window and internal parts. I will do the Passenger side tomorrow.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.