Bazooka's 63 build thread. - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ruffrida2005 · 05-16-2010, 08:05 PM

I think you can Dave, and even read it as easy.

erock805 · 05-17-2010, 09:46 AM

Done this lottsa times cause Im so strong...lol it is super easy... makes you never worry about stripping bolts again...

Bazooka · 05-20-2010, 09:10 PM

Mounted my new trans cooler to the radiator.

Now need to get the radiator back in it..

ruffrida2005 · 05-22-2010, 03:46 PM

Looks really good. You gonna make a shroud for it? I think Alan used the same rad on his truck so you might take a look at his shroud.

Project SIKty-5 · 06-07-2010, 02:47 PM

Hey Bazooka,

Couple ?s for you....where'd you get your tires at?? Also, where'd you get the motor?? Your project is looking really good, can't wait to see some more pics of that bad boy layed out.

Keep up the good work, man!

REDNOSE65 · 06-15-2010, 05:22 PM

any updates???

Bazooka · 09-01-2010, 01:40 PM

Havent had internet since May. Just checking in. Truck is going to The Choppin Block in fresno to fix some stuff that wasnt done right by the other guy. I'll see if I can get on soon after to post some pics. When I get it back I should only be a driveshaft away from driving it.

Oh yea cleaned out my PM box too. It was full..

**scotts62** · 09-01-2010, 02:33 PM

Hey welcome back

That's cool but what wasn't done right?

Bazooka · 09-27-2010, 04:00 PM

Quote:

Originally Posted by scotts62

Hey welcome back

That's cool but what wasn't done right?

I'm not offically back yet. Just able to get online once in awhile at different places.

He rushed my truck out of his shop cause he was closing his doors. Was supposed to get me taken care of within a month or two after. I waited 9 months untill I decided to take it somewhere else. Bed mounts were just temporary they sucked. Rearend was installed to far towards the rear. Some other small odds and ends. They made some bumper brackets and stuff for me too.

It's getting closer but money is tight. I just want to drive it again..

**scotts62** · 09-27-2010, 06:19 PM

Man sorry to hear they did that to you, it is everywhere out there and sucks..

erock805 · 09-28-2010, 10:49 AM

hang in there...itll come.

ruffrida2005 · 09-28-2010, 02:46 PM

man good to hear from ya again. cant wait to see what's done to the truck. I see your not running the hood hinges anymore!

Bazooka · 10-08-2010, 04:16 PM

Here is some of the stuff that has got done on my truck at the choppin block

AVS gauges under the dash

Added adjustable ends to move rear forward.

extended rear of frame to reach factory rear bed mount

front bed mounts redone

Heres the truck when I got it home. I'm going to adjust the rear a little more forward in the wheel well. Ride hieght is pretty low. its raised up in this pic to get it off the tow truck.

They made bumper brackets for the rear and installed the rear bumper. They also fixed my accelerator linkage

Going to get my tranny yoke to do to stick in the tranny so maybe I can hear it run today for the first time in 2 years..

rain_man · 10-09-2010, 10:01 AM

good luck
truck looks good

**scotts62** · 10-09-2010, 05:14 PM

Hey looks good!

creep · 10-10-2010, 08:18 PM

Sweet!

c10Mang · 10-10-2010, 09:38 PM

NICE!! good to see you making moves!! your so close

Bazooka · 10-27-2010, 05:09 PM

Thanks guys

got the truck started up again. Still sounds great..

need to get the driveshaft made for it and make a new brakeline for the rear. the guy who worked on my truck the first time removed and threw away all my metal brake lines from the cab back.

I also want to get it wired up with the new Rebel harness and upgrades from MAD electrical

*lakeroadster* · 10-27-2010, 06:03 PM

Good to see you posting again. Your truck rocks

6772owner · 10-27-2010, 06:15 PM

Looks awesome buddy, hope to hear that you're rolling in that baby soon! I hate to hear that a business would do that to a customer, no matter what the reason(s). Makes me wish everyone did business like Nathan (Porterbuilt) and all the other site vendors on here.

Bazooka · 12-04-2010, 03:28 PM

Got the new driveshaft made and installed. I think I'm pretty dang close to having this thing road ready. Just need to install that wiring harness and take it to the alignment shop.

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

Thats it for now guys take it easy..

REDNOSE65 · 12-06-2010, 11:53 AM

Edited by Staff

m6z · 12-08-2010, 02:27 PM

Edited by Staff

Bazooka · 12-11-2010, 02:54 PM

Guys if what you said was important PM me... You got deleted lol

REDNOSE65 · 12-17-2010, 12:28 PM

Quote:

Originally Posted by Bazooka

Guys if what you said was important PM me... You got deleted lol

Not sure what I said wrong...

05-16-2010, 08:05 PM	#276
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Bazooka's 63 build thread. I think you can Dave, and even read it as easy. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

05-17-2010, 09:46 AM	#277
erock805 Registered User Join Date: Apr 2007 Location: gilbert, az Posts: 392	Re: Bazooka's 63 build thread. Done this lottsa times cause Im so strong...lol it is super easy... makes you never worry about stripping bolts again... __________________ "Do what you want to the girl, but leave me alone!"

05-20-2010, 09:10 PM	#278
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Bazooka's 63 build thread. Mounted my new trans cooler to the radiator. Now need to get the radiator back in it..

05-22-2010, 03:46 PM	#279
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Bazooka's 63 build thread. Looks really good. You gonna make a shroud for it? I think Alan used the same rad on his truck so you might take a look at his shroud. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

06-07-2010, 02:47 PM	#280
Project SIKty-5 Registered User Join Date: Sep 2006 Location: Fresno, CA Posts: 86	Re: Bazooka's 63 build thread. Hey Bazooka, Couple ?s for you....where'd you get your tires at?? Also, where'd you get the motor?? Your project is looking really good, can't wait to see some more pics of that bad boy layed out. Keep up the good work, man!

06-15-2010, 05:22 PM	#281
REDNOSE65 Registered User Join Date: Dec 2009 Location: DALLAS, TEXAS Posts: 1,908	Re: Bazooka's 63 build thread. any updates??? __________________ RED NOSE '65 LOS HITTERS C.C DALLAS, TEXAS The making of a Red Nose... http://www.67-72chevytrucks.com/vboa...d.php?t=396518

09-01-2010, 01:40 PM	#282
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Bazooka's 63 build thread. Havent had internet since May. Just checking in. Truck is going to The Choppin Block in fresno to fix some stuff that wasnt done right by the other guy. I'll see if I can get on soon after to post some pics. When I get it back I should only be a driveshaft away from driving it. Oh yea cleaned out my PM box too. It was full..

09-01-2010, 02:33 PM	#283
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Bazooka's 63 build thread. Hey welcome back That's cool but what wasn't done right? __________________ Scott 93 crew cab build Project 62

09-27-2010, 06:19 PM	#285
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Bazooka's 63 build thread. Man sorry to hear they did that to you, it is everywhere out there and sucks.. __________________ Scott 93 crew cab build Project 62

09-28-2010, 10:49 AM	#286
erock805 Registered User Join Date: Apr 2007 Location: gilbert, az Posts: 392	Re: Bazooka's 63 build thread. hang in there...itll come. __________________ "Do what you want to the girl, but leave me alone!"

09-28-2010, 02:46 PM	#287
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Bazooka's 63 build thread. man good to hear from ya again. cant wait to see what's done to the truck. I see your not running the hood hinges anymore! __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

10-08-2010, 04:16 PM	#288
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Bazooka's 63 build thread. Here is some of the stuff that has got done on my truck at the choppin block AVS gauges under the dash Added adjustable ends to move rear forward. extended rear of frame to reach factory rear bed mount front bed mounts redone Heres the truck when I got it home. I'm going to adjust the rear a little more forward in the wheel well. Ride hieght is pretty low. its raised up in this pic to get it off the tow truck. They made bumper brackets for the rear and installed the rear bumper. They also fixed my accelerator linkage Going to get my tranny yoke to do to stick in the tranny so maybe I can hear it run today for the first time in 2 years..

10-09-2010, 10:01 AM	#289
rain_man Registered User Join Date: Dec 2009 Location: daytona beach fl Posts: 187	Re: Bazooka's 63 build thread. good luck truck looks good __________________ 61 step/long bed SBW(SOLD) NEED A NEW PROJECT

10-09-2010, 05:14 PM	#290
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Bazooka's 63 build thread. Hey looks good! __________________ Scott 93 crew cab build Project 62

10-10-2010, 08:18 PM	#291
creep Registered Loser Join Date: Jun 2009 Location: Elyria, OH Posts: 1,523	Re: Bazooka's 63 build thread. Sweet! __________________ ((..)) ((0)) '63 GMC lwb, 383, th350, lays frame, genuine patina. The Build Thread - http://67-72chevytrucks.com/vboard/s...d.php?t=374267 '88 Astro cargo bagged, shaved, phantom grille. SOLD '50 Chevy 2 door sedan awaiting attention. 2014 Silverado Ext cab, 5.3, daily driver.



Register or Log In To remove these advertisements.

10-10-2010, 09:38 PM	#292
c10Mang Registered User Join Date: May 2008 Location: Venice, Ca Posts: 322	Re: Bazooka's 63 build thread. NICE!! good to see you making moves!! your so close

10-27-2010, 05:09 PM	#293
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Bazooka's 63 build thread. Thanks guys got the truck started up again. Still sounds great.. need to get the driveshaft made for it and make a new brakeline for the rear. the guy who worked on my truck the first time removed and threw away all my metal brake lines from the cab back. I also want to get it wired up with the new Rebel harness and upgrades from MAD electrical Last edited by Bazooka; 10-27-2010 at 05:10 PM.

10-27-2010, 06:03 PM	#294
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: Bazooka's 63 build thread. Good to see you posting again. Your truck rocks

10-27-2010, 06:15 PM	#295
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: Bazooka's 63 build thread. Looks awesome buddy, hope to hear that you're rolling in that baby soon! I hate to hear that a business would do that to a customer, no matter what the reason(s). Makes me wish everyone did business like Nathan (Porterbuilt) and all the other site vendors on here. __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644 Last edited by 6772owner; 10-27-2010 at 06:16 PM. Reason: text

12-04-2010, 03:28 PM	#296
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Bazooka's 63 build thread. Got the new driveshaft made and installed. I think I'm pretty dang close to having this thing road ready. Just need to install that wiring harness and take it to the alignment shop. Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Thats it for now guys take it easy.. Last edited by powerdriver 1958; 12-08-2010 at 08:44 PM.

12-06-2010, 11:53 AM	#297
REDNOSE65 Registered User Join Date: Dec 2009 Location: DALLAS, TEXAS Posts: 1,908	Re: Bazooka's 63 build thread. Edited by Staff __________________ RED NOSE '65 LOS HITTERS C.C DALLAS, TEXAS The making of a Red Nose... http://www.67-72chevytrucks.com/vboa...d.php?t=396518 Last edited by 63 & 64 Bowties; 12-08-2010 at 10:06 PM.

12-08-2010, 02:27 PM	#298
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Bazooka's 63 build thread. Edited by Staff __________________ Doug Looking for a 67-72 short bed driver..... Last edited by 63 & 64 Bowties; 12-08-2010 at 10:06 PM.

12-11-2010, 02:54 PM	#299
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Bazooka's 63 build thread. Guys if what you said was important PM me... You got deleted lol Last edited by Bazooka; 12-11-2010 at 02:57 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.