Cecil the 1953 5 window / S-10 / 5.7 TPI - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oossuuu754 · 02-12-2015, 10:37 AM

SKYMANGS:Re-aging process nearly complete! I ordered a new set of injectors for it today. Hopefully they will clean up the mid range power.

**oldman3** · 02-12-2015, 10:56 AM

Chris, nice job on the aging...Jim

skymangs · 02-12-2015, 02:32 PM

Quote:

Originally Posted by tlorber

Chris, I understand the logic. However, since I am starting with a '54 long bed, I will be shortening the bedsides, running boards, and splash guards-basically working the reverse of your normal procedure. So my starting point is the placement of the bed front and bottom (I'm using the S10 steel bed bottom), that's why I'm looking for the finished dimension.

Give me a call 760-267-062. Dont want to hijack Shawn's thread with off topic discussion.

oossuuu754 · 02-12-2015, 02:39 PM

Quote:

Originally Posted by skymangs

Give me a call 760-267-062. Dont want to hijack Shawn's thread with off topic discussion.

Hell this is your thread

, I am just spreading the word about the Awesomeness of Ole' Sarge Customs!

tlorber · 02-12-2015, 02:51 PM

Everything costs more here in California. Apparently, even our phone numbers have an extra digit

skymangs · 02-12-2015, 07:24 PM

My bad.. 760-267-0624

oossuuu754 · 02-13-2015, 11:33 AM

SKYMANGS:Cecil's visor mocked up. Goes on permanently once my stainless button head bolts arrive.

oossuuu754 · 02-16-2015, 12:19 PM

SKYMANGS:Cecil's trailer hitch... like how you really can't see it? That was the idea!

918733 · 02-16-2015, 05:39 PM

Any close up's of how the hitch is mounted, is it an s10 hitch or fabbed up

skymangs · 02-16-2015, 10:29 PM

Quote:

Originally Posted by 918733

Any close up's of how the hitch is mounted, is it an s10 hitch or fabbed up

It's the S10 hitch. To make up for cutting the frame. Where it was supposed to mount, I skinni ed it up and notched the mount plates around the rear shackles. Then welded some 3/16" plate tabs to the brackets to extend them back into the frame. Make sense?

918733 · 02-16-2015, 10:59 PM

sort of makes sense but haven't got this far yet and didn't know if I would have to start from scratch and my truck didn't have a hitch so I don't have anything to go by, but knowing it's possible makes me feel better about it

oossuuu754 · 02-17-2015, 11:54 AM

SKYMANGS:Started my day today by installing Cecil's newly arrived injectors. Only to find out that they leak like something fierce from the bottom. Needless to say I will be returning them. Heading to Bonner Springs in the AM to get the old injectors sonic cleaned and flow tested... starting to get a little old now.

UPDATE: Talked to Chris this morning the company that sold the Injectors to him called him this morning and told him that the injectors need to be seated on the rail in order to not leak. He is going to try this and hopefully this eliminates the leaking fuel, and the sluggish engine at mid range.

oossuuu754 · 02-17-2015, 11:56 AM

SKYMANGS:Front bumper mocked up, brackets made and welded. Last pic is on it's own weight. I tucked it in nice and close, and raised it up over an inch from the stock location.

oossuuu754 · 02-17-2015, 05:28 PM

SKYMANGS:New door panels are a good fit! I added some '56 Chevy truck "V"s and the interior door poppers to break up that ocean of silver material

Uncle Jimi · 02-17-2015, 05:53 PM

Truely a *****in ride! It turned out amazing.

skymangs · 02-17-2015, 09:00 PM

Thanks uncle jimi. Not finished till it runs right though!

oossuuu754 · 02-18-2015, 09:51 AM

SKYMANGS:
Pic 1: Intake coming apart AGAIN! Even seated as the manufacturer recommended... still leaks! Tomorrow I'm bringing his old injectors to Bonner Springs for Sonic cleaning and flow test. Hopefully by tomorrow night it will be running smooth.

Pic 2,3,4,5: In progress pics of Cecil's new hidden tailgate links. These are 73-87 truck tailgate links. Obviosly they needed to be modified. The tailgate will get patched and pinned tomorrow.

oossuuu754 · 02-18-2015, 02:28 PM

You can tell the build is wrapping up, SKYMANGS is posting glamour shots. I can't wait to take Cecil for a drive!

SKYMANGS:The new and improved "Cecil version 2.0" hope it's everything you thought it could be Shawn!!!

So Far Chris it's better than I could have hoped for. Mom wish you could have seen it in person!

iowaboynca · 02-18-2015, 09:56 PM

Cecil looks....right.

47 Fasttoys · 02-18-2015, 10:09 PM

Building a yellow LCF are we?
Rob

skymangs · 02-18-2015, 10:51 PM

Yup. The yellow one is my in progress Tow Pig... it's a 56 GMC 350 body on an 83 1 ton dually chassis. Should be ready in 2-3 weeks to start driving daily. This one is my version of a "junkyard" build. Budget for drivable is $500. Up till last week I was up $7.

In Cecil news, the injector cleaning did the trick. Runs like a champ now! Shawn should be posting a run video shortly.

oossuuu754 · 02-18-2015, 11:16 PM

Here is the video! Now he runs as good as he looks!

https://www.facebook.com/video.php?v...nch_main_video

Thanks Chris

skymangs · 02-18-2015, 11:57 PM

You bet. It's been a pleasure!

**Advanced Design** · 02-19-2015, 12:09 AM

Sounds good!

**oldman3** · 02-19-2015, 12:15 AM

Nice job Chris...Jim

02-12-2015, 10:37 AM	#276
oossuuu754 Registered User Join Date: Jul 2014 Location: Yukon, OK Posts: 395	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI SKYMANGS:*Re-aging process nearly complete! I ordered a new set of injectors for it today. Hopefully they will clean up the mid range power.* Attached Images __________________ ---Shawn Cecil-1953 5 window build thread Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189

02-12-2015, 10:56 AM	#277
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI Chris, nice job on the aging...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

02-12-2015, 02:51 PM	#280
tlorber Registered User Join Date: Nov 2013 Location: Los Angeles Posts: 236	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI Everything costs more here in California. Apparently, even our phone numbers have an extra digit __________________ http://67-72chevytrucks.com/vboard/s...s10+frame+swap

02-12-2015, 07:24 PM	#281
skymangs Registered User Join Date: Apr 2010 Location: Warrensburg, MO Posts: 2,690	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI My bad.. 760-267-0624 __________________ www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475

02-13-2015, 11:33 AM	#282
oossuuu754 Registered User Join Date: Jul 2014 Location: Yukon, OK Posts: 395	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI SKYMANGS:*Cecil's visor mocked up. Goes on permanently once my stainless button head bolts arrive.* Attached Images __________________ ---Shawn Cecil-1953 5 window build thread Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189

02-16-2015, 12:19 PM	#283
oossuuu754 Registered User Join Date: Jul 2014 Location: Yukon, OK Posts: 395	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI SKYMANGS:*Cecil's trailer hitch... like how you really can't see it? That was the idea!* Attached Images __________________ ---Shawn Cecil-1953 5 window build thread Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189

02-16-2015, 05:39 PM	#284
918733 Registered User Join Date: Jul 2007 Location: Lufkin Texas Posts: 213	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI Any close up's of how the hitch is mounted, is it an s10 hitch or fabbed up

02-16-2015, 10:59 PM	#286
918733 Registered User Join Date: Jul 2007 Location: Lufkin Texas Posts: 213	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI sort of makes sense but haven't got this far yet and didn't know if I would have to start from scratch and my truck didn't have a hitch so I don't have anything to go by, but knowing it's possible makes me feel better about it

02-17-2015, 11:54 AM	#287
oossuuu754 Registered User Join Date: Jul 2014 Location: Yukon, OK Posts: 395	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI SKYMANGS:Started my day today by installing Cecil's newly arrived injectors. Only to find out that they leak like something fierce from the bottom. Needless to say I will be returning them. Heading to Bonner Springs in the AM to get the old injectors sonic cleaned and flow tested... starting to get a little old now. UPDATE: Talked to Chris this morning the company that sold the Injectors to him called him this morning and told him that the injectors need to be seated on the rail in order to not leak. He is going to try this and hopefully this eliminates the leaking fuel, and the sluggish engine at mid range. Attached Images __________________ ---Shawn Cecil-1953 5 window build thread Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189

02-17-2015, 11:56 AM	#288
oossuuu754 Registered User Join Date: Jul 2014 Location: Yukon, OK Posts: 395	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI SKYMANGS:*Front bumper mocked up, brackets made and welded. Last pic is on it's own weight. I tucked it in nice and close, and raised it up over an inch from the stock location.* Attached Images __________________ ---Shawn Cecil-1953 5 window build thread Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189

02-17-2015, 05:28 PM	#289
oossuuu754 Registered User Join Date: Jul 2014 Location: Yukon, OK Posts: 395	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI SKYMANGS:*New door panels are a good fit! I added some '56 Chevy truck "V"s and the interior door poppers to break up that ocean of silver material* Attached Images __________________ ---Shawn Cecil-1953 5 window build thread Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189

02-17-2015, 05:53 PM	#290
Uncle Jimi Registered User Join Date: Jul 2013 Location: Washington, UT Posts: 29	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI Truely a *****in ride! It turned out amazing.

02-17-2015, 09:00 PM	#291
skymangs Registered User Join Date: Apr 2010 Location: Warrensburg, MO Posts: 2,690	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI Thanks uncle jimi. Not finished till it runs right though! __________________ www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475

02-18-2015, 09:51 AM	#292
oossuuu754 Registered User Join Date: Jul 2014 Location: Yukon, OK Posts: 395	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI SKYMANGS: Pic 1: Intake coming apart AGAIN! Even seated as the manufacturer recommended... still leaks! Tomorrow I'm bringing his old injectors to Bonner Springs for Sonic cleaning and flow test. Hopefully by tomorrow night it will be running smooth. Pic 2,3,4,5: In progress pics of Cecil's new hidden tailgate links. These are 73-87 truck tailgate links. Obviosly they needed to be modified. The tailgate will get patched and pinned tomorrow. Attached Images __________________ ---Shawn Cecil-1953 5 window build thread Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189

02-18-2015, 02:28 PM	#293
oossuuu754 Registered User Join Date: Jul 2014 Location: Yukon, OK Posts: 395	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI You can tell the build is wrapping up, SKYMANGS is posting glamour shots. I can't wait to take Cecil for a drive! SKYMANGS:*The new and improved "Cecil version 2.0" hope it's everything you thought it could be Shawn!!!* So Far Chris it's better than I could have hoped for. Mom wish you could have seen it in person! Attached Images __________________ ---Shawn Cecil-1953 5 window build thread Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189



Register or Log In To remove these advertisements.

02-18-2015, 09:56 PM	#294
iowaboynca Registered User Join Date: Aug 2012 Location: West Side of the valley, CA Posts: 878	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI Cecil looks....right. __________________ Build: "1950" GMC -Charlotte

02-18-2015, 10:09 PM	#295
47 Fasttoys Registered User Join Date: Sep 2013 Location: Westminster, SC Posts: 933	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI Building a yellow LCF are we? Rob __________________ My '47 C.O.E build

02-18-2015, 10:51 PM	#296
skymangs Registered User Join Date: Apr 2010 Location: Warrensburg, MO Posts: 2,690	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI Yup. The yellow one is my in progress Tow Pig... it's a 56 GMC 350 body on an 83 1 ton dually chassis. Should be ready in 2-3 weeks to start driving daily. This one is my version of a "junkyard" build. Budget for drivable is $500. Up till last week I was up $7. In Cecil news, the injector cleaning did the trick. Runs like a champ now! Shawn should be posting a run video shortly. __________________ www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475

02-18-2015, 11:16 PM	#297
oossuuu754 Registered User Join Date: Jul 2014 Location: Yukon, OK Posts: 395	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI Here is the video! Now he runs as good as he looks! https://www.facebook.com/video.php?v...nch_main_video Thanks Chris __________________ ---Shawn Cecil-1953 5 window build thread Skymangs..Chris of Old Sarge customs had a shop fire and was severly injured. To help with the medical bills and expenses a fund has been set up here....http://gofundme.com/c49h5mjx8 More details are here...http://67-72chevytrucks.com/vboard/s...=1#post7253189

02-18-2015, 11:57 PM	#298
skymangs Registered User Join Date: Apr 2010 Location: Warrensburg, MO Posts: 2,690	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI You bet. It's been a pleasure! __________________ www.olesargecustoms.com email: chris@olesargecustoms.com '48 build: http://67-72chevytrucks.com/vboard/s...d.php?t=541904 '33 build: http://67-72chevytrucks.com/vboard/s...=1#post6232888 '49 build: http://67-72chevytrucks.com/vboard/s...=1#post6364475

02-19-2015, 12:09 AM	#299
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI Sounds good! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

02-19-2015, 12:15 AM	#300
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Cecil the 1953 5 window / S-10 / 5.7 TPI Nice job Chris...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.