PO has me PO'd - Page 130 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jaros44sr** · 04-27-2020, 11:24 AM

Trying to make my billet side markers light up, they come with a reflector

first remove all plastic around the edge, makes prying a lot easier to get apart with out cracking lense and backing plate

[url=https://flic.kr/p/2iUXegK]20200427_082926

[url=https://flic.kr/p/2iUUuXG]20200427_100351

[url=https://flic.kr/p/2iUYS2X]20200427_100407

Now just to work on backing plate

**jaros44sr** · 04-28-2020, 12:30 PM

[url=https://flic.kr/p/2iVkiiC]20200428_112318

Mounted up, and of course the lite doesn't lite, put a known good litebulb in and it still doesn't light. I love electrical problems, queer the other side works

**zicc1835** · 04-28-2020, 01:06 PM

Quote:

Originally Posted by jaros44sr

[url=https://flic.kr/p/2iVkiiC]20200428_112318

Mounted up, and of course the lite doesn't lite, put a known good litebulb in and it still doesn't light. I love electrical problems, queer the other side works

looks great.....

**jaros44sr** · 04-28-2020, 07:35 PM

Quote:

Originally Posted by zicc1835

looks great.....

Thanks bud, just looking at your home chrome, nice work, may look into doing that at home, maybe buy my wife a new range and use her old one in the basement

How are you holding up over there in Jersey

**zicc1835** · 04-28-2020, 08:13 PM

Quote:

Originally Posted by jaros44sr

Thanks bud, just looking at your home chrome, nice work, may look into doing that at home, maybe buy my wife a new range and use her old one in the basement

How are you holding up over there in Jersey

thank you Jim for asking
My wife and childeren so far so good are fine My daughter in law is a RNNP she works in the infectious disease dept that was her choice way before all this. We are worried to say the least. We are about 20 miles west of the epicenters county’s. and hunkered down. My wifes Mom passed yesterday from the virus she was in a nursing home 87 its more sad cause we couldn’t see her for the last almost 8 weeks she is at peace now. I hope you and your family are ok and we all get through this.
Jess

**jaros44sr** · 04-29-2020, 09:35 AM

Quote:

Originally Posted by zicc1835

thank you Jim for asking
My wife and childeren so far so good are fine My daughter in law is a RNNP she works in the infectious disease dept that was her choice way before all this. We are worried to say the least. We are about 20 miles west of the epicenters county’s. and hunkered down. My wifes Mom passed yesterday from the virus she was in a nursing home 87 its more sad cause we couldn’t see her for the last almost 8 weeks she is at peace now. I hope you and your family are ok and we all get through this.
Jess

first off sorry for your loss, we will keep her in our prayers, secondly thank your daughter for her continued work in that field.

we also have my mother-in-law in a nursing home and are worried, since we can't visit

glad to hear the rest of your family is doing well, but sad times for a lot of us

**jaros44sr** · 05-07-2020, 10:18 AM

exhaust on the cheap

went on NAPA's catalog, came up with an assortment of hangers and clamps, had to modify some of the hangers. Then had to drill a rivet, as it was in the exact place where I wanted to mount the hanger, my least favorite thing to do, after about 2 hours of stepping the drill size up and 2 batteries, worked out.

[url=https://flic.kr/p/2iYuS8X]20200507_085353

[url=https://flic.kr/p/2iYuRpn]20200507_085308

took my old 1 1/2" pipes to a shop and used them as a template, nothing fancy, no mandrel bend

turn downs had to be adapted for now, later will have the exhaust bent over axle

**jaros44sr** · 06-19-2020, 06:59 AM

[url=https://flic.kr/p/2jbP6F3]20200614_104000

moved the truck to the back yard so i could test some systems out, problems with the temp. gauge, fixed by part from NAPA G1852, sent off to a1971 blazer, and he turned it down to 3/8" ,quickly. now the gauge reads as it should(thanks to the guys on the electrical forum) also bought a repair kit from AA #34620

next was the hydro boost, pedal was pulsing, air in the system, just kept bleeding system, by turning lock to lock, and drilled a small vent hole in cap. takes a while to get all the micro bubbles out

now trans doesn't want to shift into gear, maybe an adjustment, also my pan gasket leaks, waiting on a gasket from lube locker

**jaros44sr** · 07-03-2020, 06:32 AM

ICU vascular rebuilt to a 20 yo bypass

AJs72K5 · 07-03-2020, 11:03 AM

Quote:

Originally Posted by jaros44sr

ICU vascular rebuilt to a 20 yo bypass

uh, what?!

**jaros44sr** · 07-04-2020, 06:59 PM

Quote:

Originally Posted by AJs72K5

uh, what?!

yeah, just got back home after a 1 week stay. rebuilt upper vascular system. now just a mandated 2 week recovery, kinda sucks as im having my K case tranny rebuilt, massive leak on the old th350, sure would like to be in the shop pulling the old trans and tc out

rsavage · 07-04-2020, 08:17 PM

Hope that you recover quickly Jim. Don't over do it until you are completely healed - then go back to giving her hell.

AJs72K5 · 07-04-2020, 09:04 PM

The Blazer will always be there and waiting. Get yourself healthy, sir.

**zicc1835** · 07-05-2020, 07:51 AM

Quote:

Originally Posted by jaros44sr

yeah, just got back home after a 1 week stay. rebuilt upper vascular system. now just a mandated 2 week recovery, kinda sucks as im having my K case tranny rebuilt, massive leak on the old th350, sure would like to be in the shop pulling the old trans and tc out

good to hear you came through that rebuild Jim

rest and get well soon
Jess

**DeadheadNM** · 07-05-2020, 08:16 AM

Glad surgery went well and hope the post-op recovery is speedy.

litebulblsc · 07-05-2020, 09:15 AM

Take it easy man, then like said, give'r'hell when ready.

**richard2717** · 07-05-2020, 03:09 PM

Glad all went well Jim.

low'n slow · 07-05-2020, 09:09 PM

Get better soon Jim!

**jaros44sr** · 07-21-2020, 09:57 AM

Thanks guys for all the well wishes, feeling stronger every day, made it to the back porch and was able to post up today.

Trans is getting rebuilt as we speak, they said that parts arent as available as you would think, seems everyone just thru out their old trans and now parts arent as available, as once was. so be it with the classic truck and car market

so if you have an old trans dont chuck it, save it

Thanks again all for the well wishes, made me feel much better knowing that their are people in this world that care

litebulblsc · 07-21-2020, 01:43 PM

Glad to hear you are doing well and getting better.

**jaros44sr** · 07-23-2020, 09:50 AM

thanks, but my timing really sucks, as I was supposed to be rock crawling right now with VT Blazer and my boys out in Shmockin, pa, but it gives me one more year to work on my truck, maybe next year

**jaros44sr** · 10-01-2020, 10:13 AM

[url=https://flic.kr/p/2jN5M3u]16015614520049023140474075426747

**jaros44sr** · 10-01-2020, 10:18 AM

Decided to give my brush guard a couple coats of rust prevention

Not sure of color yet, black white or grey. Truck has a 68 front end(white) with grey surrounds

What say yee?

Tynee · 10-01-2020, 10:32 AM

I think I’d vote for grey. At least do the first coat and mount it. Look at it for a couple days, then finish it if you like it.

Somehow missed your trip to the ICU. Glad you’re back in the shop.
Posted via Mobile Device

**jaros44sr** · 10-02-2020, 09:07 AM

16015640091798392100435047572824 by James Jaros, on Flickr

Just for reference, to see how many different part numbers are out there

Thanks Tynee, road to recovery has been slow, my staples are out, but I can't tell how I'm healing on the inside.
I'm 3 months out of surgery, dr. Said it could take 6 months

The only rubberized undercoat I could find is a 3M body schutz no.08864 in black, maybe tinted with white would give me grey, plus I want to give it a texture finish, I'll use a sponge and see if that works

04-27-2020, 11:24 AM	#3226
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd Trying to make my billet side markers light up, they come with a reflector first remove all plastic around the edge, makes prying a lot easier to get apart with out cracking lense and backing plate [url=https://flic.kr/p/2iUXegK]20200427_082926 [url=https://flic.kr/p/2iUUuXG]20200427_100351 [url=https://flic.kr/p/2iUYS2X]20200427_100407 Now just to work on backing plate __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 04-28-2020 at 07:36 PM.

04-28-2020, 12:30 PM	#3227
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd [url=https://flic.kr/p/2iVkiiC]20200428_112318 Mounted up, and of course the lite doesn't lite, put a known good litebulb in and it still doesn't light. I love electrical problems, queer the other side works __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

05-07-2020, 10:18 AM	#3232
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd exhaust on the cheap went on NAPA's catalog, came up with an assortment of hangers and clamps, had to modify some of the hangers. Then had to drill a rivet, as it was in the exact place where I wanted to mount the hanger, my least favorite thing to do, after about 2 hours of stepping the drill size up and 2 batteries, worked out. [url=https://flic.kr/p/2iYuS8X]20200507_085353[url=https://flic.kr/p/2iYuRpn]20200507_085308 took my old 1 1/2" pipes to a shop and used them as a template, nothing fancy, no mandrel bend turn downs had to be adapted for now, later will have the exhaust bent over axle __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 05-07-2020 at 10:28 AM.

06-19-2020, 06:59 AM	#3233
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd [url=https://flic.kr/p/2jbP6F3]20200614_104000 moved the truck to the back yard so i could test some systems out, problems with the temp. gauge, fixed by part from NAPA G1852, sent off to a1971 blazer, and he turned it down to 3/8" ,quickly. now the gauge reads as it should(thanks to the guys on the electrical forum) also bought a repair kit from AA #34620 next was the hydro boost, pedal was pulsing, air in the system, just kept bleeding system, by turning lock to lock, and drilled a small vent hole in cap. takes a while to get all the micro bubbles out now trans doesn't want to shift into gear, maybe an adjustment, also my pan gasket leaks, waiting on a gasket from lube locker __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 06-19-2020 at 07:15 AM.

07-03-2020, 06:32 AM	#3234
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd ICU vascular rebuilt to a 20 yo bypass __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

07-04-2020, 08:17 PM	#3237
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: PO has me PO'd Hope that you recover quickly Jim. Don't over do it until you are completely healed - then go back to giving her hell. __________________ 1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7

07-04-2020, 09:04 PM	#3238
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: PO has me PO'd The Blazer will always be there and waiting. Get yourself healthy, sir. __________________ - AJ Gray Matter Build - 1972 K5 with some stuff

07-05-2020, 08:16 AM	#3240
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,447	Re: PO has me PO'd Glad surgery went well and hope the post-op recovery is speedy. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

07-05-2020, 09:15 AM	#3241
litebulblsc Registered User Join Date: Aug 2006 Location: LaSalle Mi Posts: 525	Re: PO has me PO'd Take it easy man, then like said, give'r'hell when ready.

07-05-2020, 03:09 PM	#3242
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,130	Re: PO has me PO'd Glad all went well Jim. __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

07-05-2020, 09:09 PM	#3243
low'n slow Too Dumb To Know Better Join Date: Nov 2005 Location: Texas Posts: 882	Re: PO has me PO'd Get better soon Jim!

07-21-2020, 09:57 AM	#3244
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd Thanks guys for all the well wishes, feeling stronger every day, made it to the back porch and was able to post up today. Trans is getting rebuilt as we speak, they said that parts arent as available as you would think, seems everyone just thru out their old trans and now parts arent as available, as once was. so be it with the classic truck and car market so if you have an old trans dont chuck it, save it Thanks again all for the well wishes, made me feel much better knowing that their are people in this world that care __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

07-21-2020, 01:43 PM	#3245
litebulblsc Registered User Join Date: Aug 2006 Location: LaSalle Mi Posts: 525	Re: PO has me PO'd Glad to hear you are doing well and getting better.

07-23-2020, 09:50 AM	#3246
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd thanks, but my timing really sucks, as I was supposed to be rock crawling right now with VT Blazer and my boys out in Shmockin, pa, but it gives me one more year to work on my truck, maybe next year __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

10-01-2020, 10:13 AM	#3247
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd [url=https://flic.kr/p/2jN5M3u]16015614520049023140474075426747 __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim



Register or Log In To remove these advertisements.

10-01-2020, 10:18 AM	#3248
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd Decided to give my brush guard a couple coats of rust prevention Not sure of color yet, black white or grey. Truck has a 68 front end(white) with grey surrounds What say yee? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

10-01-2020, 10:32 AM	#3249
Tynee I miss this truck. Join Date: Dec 2001 Location: Lexington, KY U.S.A. Posts: 2,863	Re: PO has me PO'd I think I’d vote for grey. At least do the first coat and mount it. Look at it for a couple days, then finish it if you like it. Somehow missed your trip to the ICU. Glad you’re back in the shop. Posted via Mobile Device

10-02-2020, 09:07 AM	#3250
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: PO has me PO'd 16015640091798392100435047572824 by James Jaros, on Flickr Just for reference, to see how many different part numbers are out there Thanks Tynee, road to recovery has been slow, my staples are out, but I can't tell how I'm healing on the inside. I'm 3 months out of surgery, dr. Said it could take 6 months The only rubberized undercoat I could find is a 3M body schutz no.08864 in black, maybe tinted with white would give me grey, plus I want to give it a texture finish, I'll use a sponge and see if that works __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 10-02-2020 at 10:16 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.