What parts aren't out there? - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69C10@16 · 02-01-2008, 01:24 PM

Another vote for the hoods with no hump in the middle. I think that would look bad@$$.

james w · 02-01-2008, 02:21 PM

how about outer roof patch panels front section or rear for 67-72

Angelse68cal · 02-01-2008, 03:50 PM

HOw about a Rear metal hatch for the Blazer

**Bob B.** · 02-01-2008, 05:50 PM

Back to GMC core supports, it looks to me that the Chevy core support is the same as a GMC, but there are brackets spot welded to attach the 4 headlight buckets. Maybe you only need to reproduce those brackets, and either weld them to a Chevy core support or sell them separately.

TierAngst · 03-15-2008, 02:23 AM

In-cab hood releases would be a wonderful item and I think you would have a ton of these sell.

Some of the guys on the forum have made their own but a lot of people don't like to fab up parts and search junk yards. Here is a link to a topic of how they did it http://www.67-72chevytrucks.com/vboa...t=hood+release

Edit:

Thought of another one.

A fuel filler kit for the blazer tank install. http://67-72chevytrucks.com/vboard/s...ad.php?t=77104
Basically would need all the parts in the write up prefabbed for the install. No adapters, no welding, no guess work at all.

Hope the creators of both don't mind me asking a vendor to make them.

Old Chevy Mech · 03-15-2008, 03:27 AM

How about a patch for the floor area under the passenger side seat in the blazer?

And how about a full side skin for a blazer. Brothers sells the front & rear halves, but it would be nice to get a one piece. Enough welding on a one piece let alone 2 halves.

TonyJohnson · 03-15-2008, 03:37 AM

Quote:

Originally Posted by Angelse68cal

HOw about a Rear metal hatch for the Blazer

YES!

fastazhell · 04-10-2008, 07:47 AM

any update on LWB bedside for us?? Brothers told me april back before christmas, just wondering how close we might be...

theoneandonly · 04-10-2008, 09:56 AM

How about forword rear spring hangers for people who want to convert from coil to leaf springs. I have found several shackle flips for the rear but no one repops the forword rear spring hanger. I know some trucks have rust or bent spring hangers.

chevy72blu · 04-10-2008, 10:06 AM

May have already been mentioned, but 72 BBC frame towers

**El Jay** · 04-10-2008, 11:29 AM

Quote:

Originally Posted by Tri-ProAutomotive

Trying to find new product ideas. If there are parts that aren't available now that you'd like to see made; or those you'd like to see improved please let me know.

So far I've had a number of requests for the '67-'72 auxillary battery tray and a couple for the '67-'68 grille. Anything else?

All of the other folks on this thread have excellent ideas.

I just like the fact that you are asking "what needs to be made?"

My kudos to you, for that!

El Jay

jb4short · 04-10-2008, 03:15 PM

Quote:

Originally Posted by fastazhell

any update on LWB bedside for us?? Brothers told me april back before christmas, just wondering how close we might be...

I shot pictures of the prototypes over a year ago....every time we get an update the date comes and goes. We DID just get our own '67-'72 stepside bedsides in stock with the stake pockets and angle strips installed. They also come with a set of stainless hole caps.

jb4short · 04-10-2008, 03:18 PM

Quote:

Originally Posted by Bob B.

Back to GMC core supports, it looks to me that the Chevy core support is the same as a GMC, but there are brackets spot welded to attach the 4 headlight buckets. Maybe you only need to reproduce those brackets, and either weld them to a Chevy core support or sell them separately.

We compared one here to the Chevrolet and decided the headlight bucket was the only difference (or maybe we found one hole we couldn't explain but attributed it to the PO). The headlight bucket is in Taiwan now and I need to know what years it fits exactly (Thanks jaros44!)

jb4short · 04-10-2008, 03:19 PM

Quote:

Originally Posted by james w

how about outer roof patch panels front section or rear for 67-72

I wish I had those here right now

PS: Multi-Quote owns me

**jaros44sr** · 04-10-2008, 04:22 PM

Quote:

Originally Posted by Tri-ProAutomotive

We compared one here to the Chevrolet and decided the headlight bucket was the only difference (or maybe we found one hole we couldn't explain but attributed it to the PO). The headlight bucket is in Taiwan now and I need to know what years it fits exactly (Thanks jaros44!)

Special blu coloredK and Longhrn Man said all years are the same, can't find the thread my search ain't working, try yours

Sinister · 04-10-2008, 05:16 PM

Hoods for '69-'72 that are sloped in the front like '67-'68 hoods...

jb4short · 04-10-2008, 05:52 PM

Quote:

Originally Posted by jaros44sr

Special blu coloredK and Longhrn Man said all years are the same, can't find the thread my search ain't working, try yours

I was hoping some GMC expert would jump in here and save me

Mr Chevy · 04-10-2008, 06:17 PM

I know some of these have already been mentioned many times but I will vote again for:

LWB Fleetside COMPLETE FULL BEDS I would gladly pay for a complete bed plus wouldnt mind paying up to $500 to ship it. I just would like to see complete beds for sale. If thats not possible then at least Bedsides and floors.

FULL COMPLETE STEEL CABS again wouldnt mind paying high for shipping just want it. If not at least start making parts that others dont. Complete full roof panels

NEW BENCH SEATS Complete replacement bolt in ready to go seats! If these were made I think you could sell a couple thousand the first week!

Those are a few things I would love to see made
BEDS / CABS / SEATS

jb4short · 04-10-2008, 06:34 PM

Quote:

Originally Posted by Mr Chevy

I know some of these have already been mentioned many times but I will vote again for:

LWB Fleetside COMPLETE FULL BEDS I would gladly pay for a complete bed plus wouldnt mind paying up to $500 to ship it. I just would like to see complete beds for sale. If thats not possible then at least Bedsides and floors.

FULL COMPLETE STEEL CABS again wouldnt mind paying high for shipping just want it. If not at least start making parts that others dont. Complete full roof panels

NEW BENCH SEATS Complete replacement bolt in ready to go seats! If these were made I think you could sell a couple thousand the first week!

Those are a few things I would love to see made
BEDS / CABS / SEATS

Wood floor LWB bed can be a reality here shortly....steel floor not so much

Dynacorn may be working on a full cab; I really don't know. If it does come out just be prepared to spend 6K for one (If it follow the pricing of the other ones they've made)

chrislehr · 04-10-2008, 07:01 PM

Sell a gas tank relocation kit that actually has EVERYTHING you need. Door, filler neck, hoses, grommets, etc.?

**70cst** · 04-10-2008, 07:40 PM

Whats the latest on the plastic/molded glove box liner?

jb4short · 04-10-2008, 07:42 PM

Quote:

Originally Posted by 70cst

Whats the latest on the plastic/molded glove box liner?

not going to happen for now

**70cst** · 04-10-2008, 07:44 PM

Ok Tri-ProAutomotive ...I just read the post on a previous page about the glove box liner...duh? I should have read before posting. At least you gave it a good try. I appreciate you asking for the needs of these trucks. Very good marketing approach.

see ten · 04-10-2008, 10:59 PM

Are tailgate patch panels made anymore? I know I bought a patch for the lower inside of a gate several years ago and now they don't seem to be available. I've seen a lot of good gates with pinholes across the inside bottom of em that a patch would save.

This might have already been mentioned somewhere in this thread....But I didn't read through 14 pages of it.

LUV2XCLR8 · 04-10-2008, 11:02 PM

Quote:

Originally Posted by see ten

This might have already been mentioned somewhere in this thread....But I didn't read through 14 pages of it.

How about BLAZER / JIMMY bedsides and Windsheild Frames

02-01-2008, 01:24 PM	#326
69C10@16 Registered User Join Date: Aug 2007 Location: Greenfield, MO Posts: 215	Re: What parts aren't out there? Another vote for the hoods with no hump in the middle. I think that would look bad@$$.

02-01-2008, 02:21 PM	#327
james w Registered User Join Date: Dec 2007 Location: La Vernia Tx Posts: 27	Re: What parts aren't out there? how about outer roof patch panels front section or rear for 67-72 __________________ 71 custom 10LWB 96 thunderbirdLX(wifes car) 04 F350XLT 05 peterbuilt379 550 twin turbo cat. 72sterncraft whoever dies first with the most toys wins

02-01-2008, 03:50 PM	#328
Angelse68cal Cochino_Racing_909 Join Date: Oct 2006 Location: California Posts: 280	Re: What parts aren't out there? HOw about a Rear metal hatch for the Blazer

02-01-2008, 05:50 PM	#329
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,385	Re: What parts aren't out there? Back to GMC core supports, it looks to me that the Chevy core support is the same as a GMC, but there are brackets spot welded to attach the 4 headlight buckets. Maybe you only need to reproduce those brackets, and either weld them to a Chevy core support or sell them separately. __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.

03-15-2008, 02:23 AM	#330
TierAngst Registered User Join Date: Feb 2007 Location: San Antonio Posts: 51	Re: What parts aren't out there? In-cab hood releases would be a wonderful item and I think you would have a ton of these sell. Some of the guys on the forum have made their own but a lot of people don't like to fab up parts and search junk yards. Here is a link to a topic of how they did it http://www.67-72chevytrucks.com/vboa...t=hood+release Edit: Thought of another one. A fuel filler kit for the blazer tank install. http://67-72chevytrucks.com/vboard/s...ad.php?t=77104 Basically would need all the parts in the write up prefabbed for the install. No adapters, no welding, no guess work at all. Hope the creators of both don't mind me asking a vendor to make them. Last edited by TierAngst; 03-15-2008 at 02:50 AM.

03-15-2008, 03:27 AM	#331
Old Chevy Mech Keepin it runnin! Join Date: Oct 2007 Location: Deep River, CT Posts: 1,036	Re: What parts aren't out there? How about a patch for the floor area under the passenger side seat in the blazer? And how about a full side skin for a blazer. Brothers sells the front & rear halves, but it would be nice to get a one piece. Enough welding on a one piece let alone 2 halves. __________________ 1970 K-5 4X4 Blazer 1970 K-20 4X4 Long Bed "Liberty Means Responsibility, that is why most men dread it"

04-10-2008, 07:47 AM	#333
fastazhell Registered User Join Date: Sep 2007 Location: Orlando, FL Posts: 39	Re: What parts aren't out there? any update on LWB bedside for us?? Brothers told me april back before christmas, just wondering how close we might be... __________________ 71 LWB c10- needs more work than I have money! ASE certified Ford Master Tech

04-10-2008, 09:56 AM	#334
theoneandonly Registered User Join Date: Nov 2007 Location: Fayetteville NC Posts: 102	Re: What parts aren't out there? How about forword rear spring hangers for people who want to convert from coil to leaf springs. I have found several shackle flips for the rear but no one repops the forword rear spring hanger. I know some trucks have rust or bent spring hangers. __________________ SSG Jeffery Ahlheim 586th Network Support Company, 525th BfSB US Army, FT Bragg, NC 2009 Chevy Silverado LT ext cab 5.3L If you don't stand behind our troops, please feel free to stand in front of them.

04-10-2008, 10:06 AM	#335
chevy72blu Registered User Join Date: Apr 2004 Location: Las Vegas, NV Posts: 2,189	Re: What parts aren't out there? May have already been mentioned, but 72 BBC frame towers __________________ RIP EastSideLowLife '72 C20 SWB convert. 5 lug, LS1/4l60e

04-10-2008, 05:16 PM	#341
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: What parts aren't out there? Hoods for '69-'72 that are sloped in the front like '67-'68 hoods... __________________ Beat it to fit, Paint it to match...

04-10-2008, 06:17 PM	#343
Mr Chevy and son Join Date: Apr 2008 Location: Hagerstown Maryland 21740 Posts: 81	Re: What parts aren't out there? I know some of these have already been mentioned many times but I will vote again for: LWB Fleetside COMPLETE FULL BEDS I would gladly pay for a complete bed plus wouldnt mind paying up to $500 to ship it. I just would like to see complete beds for sale. If thats not possible then at least Bedsides and floors. FULL COMPLETE STEEL CABS again wouldnt mind paying high for shipping just want it. If not at least start making parts that others dont. Complete full roof panels NEW BENCH SEATS Complete replacement bolt in ready to go seats! If these were made I think you could sell a couple thousand the first week! Those are a few things I would love to see made BEDS / CABS / SEATS __________________ 1970 C10 8ft Fleetside The build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=289628 1986 GMC 3500 2wd CrewCab Dually 454 1994 Chevy 2500 2wd Ext Cab 8ft bed

04-10-2008, 07:01 PM	#345
chrislehr Engine n00b Join Date: Feb 2008 Location: Austin Posts: 1,031	Re: What parts aren't out there? Sell a gas tank relocation kit that actually has EVERYTHING you need. Door, filler neck, hoses, grommets, etc.?

04-10-2008, 07:40 PM	#346
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,375	Re: What parts aren't out there? Whats the latest on the plastic/molded glove box liner? __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

04-10-2008, 07:44 PM	#348
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,375	Re: What parts aren't out there? Ok Tri-ProAutomotive ...I just read the post on a previous page about the glove box liner...duh? I should have read before posting. At least you gave it a good try. I appreciate you asking for the needs of these trucks. Very good marketing approach. __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! Last edited by 70cst; 04-10-2008 at 07:45 PM.

04-10-2008, 10:59 PM	#349
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: What parts aren't out there? Are tailgate patch panels made anymore? I know I bought a patch for the lower inside of a gate several years ago and now they don't seem to be available. I've seen a lot of good gates with pinholes across the inside bottom of em that a patch would save. This might have already been mentioned somewhere in this thread....But I didn't read through 14 pages of it.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.