Show us your seats

[blackcloud45]

Originally Posted by tazattitude

even has a small air compressor for lumbar
F150 seat - yes I know. But I liked the shape of the seat

What year F150? That looks like it was made for it!

[lucifer]

super comfy seats!

[NevEno]

These are the seats I'm using out of a 2010 crewcab super duty in my 64.. I know, I know f**d. I wanted a tan leather seat without spending a ton of $$$!! The seat fits the cab very well. They are the rear seat so they are not adjustable.

[Hx16457]

Originally Posted by lucifer

super comfy seats!
Attachment 1226445

High Country seats! My wife has those same seats in her High Country 2017, 4x4 6.2L. Very nice!
Posted via Mobile Device

[1963c-10]

Originally Posted by NEWFISHER

67-87 seats are supposed to be a direct bolt in. 88-99 bench seats use the same forward mounting bolts and must fabricate rear. Other than those, it's all fabricating to get them in. Installing seats on a somewhat flat floor has to be the easiest fabrication out there. if someone stumbles here, they will have a long road ahead of them on the rest of the build

Seats are so personal also. What may work and fit for one, may not another. It's best to try what you like and then make it work.

I have a 67 bench seat in my 63 fleet (temporary) and it fit in the stock location just fine. The 67-68 used a larger mounting bolt for the cab/seat mount, but the stock bolts held it in just fine. Other than the track adjuster arm/knob, they tracks look the same. The seats look pretty close other than full depth foam as opposed to the flat foam used in the standard 60-66 seats

[LostMy65]

A little update.
Ordered some Iggee seat covers for my fiero seats. Here they are just slipped on but not cinched down yet. They'll look better once they're tightened down.
Well... they looked like they were missing something, so I picked up a buddy seat that fits nicely between.
This gives me that little nostalgia of the buddy buckets I had back in the 80's.

[LostMy65]

Originally Posted by LostMy65

A little update.
Ordered some Iggee seat covers for my fiero seats. Here they are just slipped on but not cinched down yet. They'll look better once they're tightened down.
Well... they looked like they were missing something, so I picked up a buddy seat that fits nicely between.
This gives me that little nostalgia of the buddy buckets I had back in the 80's.

.
The pic above was done with a photo editing app to make the center seat blue.
Here it is after I dyed the vinyl of the center seat.

[SayBye]

Installed a 2nd row bench from a 99 Tahoe in mine...

[Garagisti]

Here's mine....

[Strodder]

Originally Posted by Garagisti

Here's mine....

Now those look comphy.

[Garagisti]

Originally Posted by Strodder

Now those look comphy.

They are! I drove it from Huntington Beach, Ca to Vegas last year. My upholstery guy restuffed and made the bolsters. Super comfy. We also added heated seats, which I have yet to use.

[Strodder]

Originally Posted by Garagisti

They are! I drove it from Huntington Beach, Ca to Vegas last year. My upholstery guy restuffed and made the bolsters. Super comfy. We also added heated seats, which I have yet to use.

Who did it and was he reasonable?

[WhippinSaw]

Here's my 63, had it stock for 30 years, thinking about changing it back when the new seat wears out.

[bmur66]

I scored a "brand new" takeout 1986 GMC bench for my "65 GMC

[LostMy65]

Originally Posted by bmur66

I scored a "brand new" takeout 1986 GMC bench for my "65 GMC

.
That goes real nice in there.
I like it.

[rudyyloverboiii]

Anyone know where i can get those fuzzy dash covers?

[LVPhotos]

Your local fab...ric shop. Cut and paste.

[Jahloha]

Originally Posted by tazattitude

even has a small air compressor for lumbar
F150 seat - yes I know. But I liked the shape of the seat

What year F150? I am liking these. Also, how tall are you? Looking for a setup for a my height, 6'4''

[tazattitude]

It is out of a early 90's F-150. I am 5'8, but I also put 1" spacers in the bottom brackets of the seat.

[Jim53066]

Buckets out of a 1999 Cadillac Catera (sp?) the console is out of an 80's GM truck (I think)

Jim

[mailman]

Originally Posted by Jim53066

Buckets out of a 1999 Cadillac Catera (sp?) the console is out of an 80's GM truck (I think)

Jim

How did you raise the center console?

[jwild65]

i have tan power heated leather seats from a 2006 bmw 330xi. they are sweet. very comfortable and look pretty sweet. still test fitting, but will fully install soon.

[bcontractor]

Mine are a little more useful for long trips....its a 1.6 lowflow quiet flush one piece.....I went with with the one piece as I thought the tank would get too many vibrations when driving.Round bowl also too as not to sit to close to the steering wheel...Now I am looking for an old beer keg to mount in the bed for water supply and going to put a air valve on to so I can charge for pressure..ehehehhehe nad never leave the seat up !!!

[Slow Build]

Originally Posted by bcontractor

Mine are a little more useful for long trips....

I think that would be better in a small window......Oh, and doors, definitely with doors.

[Strodder]

Originally Posted by bcontractor

Mine are a little more useful for long trips....its a 1.6 lowflow quiet flush one piece.....I went with with the one piece as I thought the tank would get too many vibrations when driving.Round bowl also too as not to sit to close to the steering wheel...Now I am looking for an old beer keg to mount in the bed for water supply and going to put a air valve on to so I can charge for pressure..ehehehhehe nad never leave the seat up !!!