Project 67 DRGNWGN - 67 Burban!! - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 03-21-2011, 07:01 PM

Looks super cool!

67chevy1series · 03-22-2011, 07:28 PM

wow that is awsome! you dont have all the door latch stuff on so the doors are staying open a little right? have you washed the interior and cleaned it up? great progress!

**kev2809** · 03-22-2011, 09:06 PM

thanks fellas!

ya, i havent put the latches on yet, still gotta sand em up and spray em silver. havent really done anything to the interior...still kinda planning on what to do. i know i will need some big sheets of sheetmetal though lol. i would like to build the floor all together and make a huge hatch opening in the floor to access all the air ride stuff. that will be later in the year though...

67chevy1series · 03-22-2011, 09:11 PM

i thought so you know sooner or later we are going to need interior pics

**kev2809** · 03-31-2011, 10:29 PM

lol..i wish i was at that stage to work on the interior...someday

well, not much progress has been done. i did get the the the hatch sanded down and ready to spray. but it would be useless without getting the rear cargo area primed. also started working on the tailgate, man this thing needs A LOT of work! so i decided to finish up the cargo jamb. not sure if you guys remember, but it was pushed in about 3-4 inches on the passenger side by the hinge area. i decided it would be much easier to replace the area rather than try to pull it out. so heres the progress...

heres how off i was on the cut...less than 1/4"..im happy with it!

this shows how pushed in the very end of it was...it was worse a litte more towards the center..

overall i think its turning out pretty good. when i looked at it from the side it is a little bowed where the 2 pieces meet, but not a whole lot. i think it will finish up nicely. ill finish welding up tomorrow and grind it all up hopefully, then i can get to sanding it down saturday morning and shooting it.

and whats been slowing me down lately? just signed the papers on a house! will be my first home purchase..so im def. excited but really nervous!

best part about it is that i will finally have a garage...worst thing is my truck will probably end up on the back burner for a while to see how things go. im hoping not, but i guess well see. i can still get the truck fully primed in and out, interior painted along with the firewall, and motor dropped in. but all the glass and rubber and little things will have to wait. looks like im gonna miss this show year

donations for the truck are gladly appreciated

*project 67 sub* · 04-01-2011, 03:55 AM

looking good bro, looking good

FRENCHBLUE72 · 04-01-2011, 04:03 PM

Looks pretty good..

**kev2809** · 04-23-2011, 05:51 PM

well...been a while! no progress on the truck, ive been REALLY busy this past month. finally got settled in my new place..and actually got my truck over and in the garage last week. sooo..maybe this week or next weekend ill get back on it! still no compressor, so ill just be grinding and welding for now (should keep me pretty busy!)

**kev2809** · 05-02-2011, 02:59 PM

started on the firewall for now..i like to bounce around to keep me motivated

the back of the truck is pushed nearly against the wall in the garage...so i decided to work on this for now. got the circle one all welded up...will probably start tacking on the other 2 today. heres all the progress for now..

tacked in place..

mostly welded up..

had to weld up some rust holes on both ends of the circle plate also..

all welded up!

FRENCHBLUE72 · 05-02-2011, 11:43 PM

Pleaee round the wire gutter also..

**kev2809** · 05-03-2011, 06:35 AM

huh?
Posted via Mobile Device

babylonflyer · 05-10-2011, 09:20 PM

Where u at?? how u doing kev...

**kev2809** · 05-10-2011, 09:27 PM

doin good, havent done much lately! i did get the firewall patches in and welded up, just have to grind some more and maybe a few more welds. might get back on it tomorrow!

Slick67 · 05-11-2011, 09:14 AM

Quote:

Originally Posted by FRENCHBLUE72

Pleaee round the wire gutter also..

He is saying shave the wire gutter! It would look great IMHO!

charx2 · 05-16-2011, 01:29 PM

You ever figure out a way to mount your rear bags? I'm in the same situation as you and I'm trying to figure something out now. I might have to go with sleeved bags and mount over axel is all I can see....

67chevy1series · 05-21-2011, 02:27 PM

nice progress kevin! look forward to more progress and pics! soon to be really nice!

**kev2809** · 05-22-2011, 11:45 AM

Quote:

Originally Posted by Slick67

He is saying shave the wire gutter! It would look great IMHO!

oh! man i would love to, but that seems like a lot of work! i wasnt really planning on shaving the firewall, dont even know how it happened lol. i need to get this thing rolling already, maybe if i stall on something and i have some extra time ill try it out.

Quote:

Originally Posted by charx2

You ever figure out a way to mount your rear bags? I'm in the same situation as you and I'm trying to figure something out now. I might have to go with sleeved bags and mount over axel is all I can see....

nope, if i trusted myself on welding my own brackets, i would just 4 link it and put them on the lower bars. but, im thinking of maybe switching to putting them on my axle, like texastrends did. i believe he used these brackets..

Quote:

Originally Posted by 67chevy1series

nice progress kevin! look forward to more progress and pics! soon to be really nice!

working on it! sucks without having a compressor but hopefully should be getting one with in the next month or so..

FRENCHBLUE72 · 05-22-2011, 11:49 AM

.....

**kev2809** · 05-22-2011, 11:59 AM

show off...

lol, that does look clean! nice work..

FRENCHBLUE72 · 05-22-2011, 12:08 PM

Thanks... Yep there is some work involved but its all worth it in the end.

texastrendz · 05-22-2011, 12:11 PM

Quote:

Originally Posted by kev2809

oh! man i would love to, but that seems like a lot of work! i wasnt really planning on shaving the firewall, dont even know how it happened lol. i need to get this thing rolling already, maybe if i stall on something and i have some extra time ill try it out.

nope, if i trusted myself on welding my own brackets, i would just 4 link it and put them on the lower bars. but, im thinking of maybe switching to putting them on my axle, like texastrends did. i believe he used these brackets..

working on it! sucks without having a compressor but hopefully should be getting one with in the next month or so..

yes, those are the brackets i used on my project, you can trim the top one to align it to the bottom one as needed.

**kev2809** · 05-22-2011, 01:05 PM

just curious, what welder did you use for that?

my friend has a hobart mig welder that i used to extend my panhard bar with. wondering if it could be good enough to weld those brackets on with.

**kev2809** · 05-22-2011, 02:57 PM

got a little done today, finished up the shaving of the firewall. still need to grind just a little bit, then its on to some filler. oh, and before i forget, what was that orange wire plugged up to? ..i was about to cut it off but cant remember what it was connected to..lol

[IMG]

[/IMG]

is there any spray can primer that i can spray on this bare metal before laying primer? i cant spray my eastwood until i get a compressor, but i really dont want to lay filler over bare metal.

FRENCHBLUE72 · 05-22-2011, 03:17 PM

Orange wire went to the blower motor..

**kev2809** · 05-22-2011, 03:31 PM

good, its coming off then lol. hey, i noticed you shaved up a lot of bolts and holes on the driver side, did you move a lot of things around to get rid of those. i was looking at mine and it doesnt seem i could really get rid of any of them.

03-21-2011, 07:01 PM	#351
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Project 67 DRGNWGN - 67 Burban!! Looks super cool! __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-22-2011, 07:28 PM	#352
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project 67 DRGNWGN - 67 Burban!! wow that is awsome! you dont have all the door latch stuff on so the doors are staying open a little right? have you washed the interior and cleaned it up? great progress!

03-22-2011, 09:06 PM	#353
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! thanks fellas! ya, i havent put the latches on yet, still gotta sand em up and spray em silver. havent really done anything to the interior...still kinda planning on what to do. i know i will need some big sheets of sheetmetal though lol. i would like to build the floor all together and make a huge hatch opening in the floor to access all the air ride stuff. that will be later in the year though... __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

03-22-2011, 09:11 PM	#354
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project 67 DRGNWGN - 67 Burban!! i thought so you know sooner or later we are going to need interior pics

03-31-2011, 10:29 PM	#355
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! lol..i wish i was at that stage to work on the interior...someday well, not much progress has been done. i did get the the the hatch sanded down and ready to spray. but it would be useless without getting the rear cargo area primed. also started working on the tailgate, man this thing needs A LOT of work! so i decided to finish up the cargo jamb. not sure if you guys remember, but it was pushed in about 3-4 inches on the passenger side by the hinge area. i decided it would be much easier to replace the area rather than try to pull it out. so heres the progress... heres how off i was on the cut...less than 1/4"..im happy with it! this shows how pushed in the very end of it was...it was worse a litte more towards the center.. overall i think its turning out pretty good. when i looked at it from the side it is a little bowed where the 2 pieces meet, but not a whole lot. i think it will finish up nicely. ill finish welding up tomorrow and grind it all up hopefully, then i can get to sanding it down saturday morning and shooting it. and whats been slowing me down lately? just signed the papers on a house! will be my first home purchase..so im def. excited but really nervous! best part about it is that i will finally have a garage...worst thing is my truck will probably end up on the back burner for a while to see how things go. im hoping not, but i guess well see. i can still get the truck fully primed in and out, interior painted along with the firewall, and motor dropped in. but all the glass and rubber and little things will have to wait. looks like im gonna miss this show year donations for the truck are gladly appreciated __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-01-2011, 03:55 AM	#356
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Project 67 DRGNWGN - 67 Burban!! looking good bro, looking good

04-01-2011, 04:03 PM	#357
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project 67 DRGNWGN - 67 Burban!! Looks pretty good.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-23-2011, 05:51 PM	#358
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! well...been a while! no progress on the truck, ive been REALLY busy this past month. finally got settled in my new place..and actually got my truck over and in the garage last week. sooo..maybe this week or next weekend ill get back on it! still no compressor, so ill just be grinding and welding for now (should keep me pretty busy!) __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-02-2011, 02:59 PM	#359
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! started on the firewall for now..i like to bounce around to keep me motivated the back of the truck is pushed nearly against the wall in the garage...so i decided to work on this for now. got the circle one all welded up...will probably start tacking on the other 2 today. heres all the progress for now.. tacked in place.. mostly welded up.. had to weld up some rust holes on both ends of the circle plate also.. all welded up! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-02-2011, 11:43 PM	#360
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project 67 DRGNWGN - 67 Burban!! Pleaee round the wire gutter also.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-03-2011, 06:35 AM	#361
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! huh? Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-10-2011, 09:20 PM	#362
babylonflyer Registered User Join Date: Oct 2010 Location: CALI Posts: 107	Re: Project 67 DRGNWGN - 67 Burban!! Where u at?? how u doing kev...

05-10-2011, 09:27 PM	#363
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! doin good, havent done much lately! i did get the firewall patches in and welded up, just have to grind some more and maybe a few more welds. might get back on it tomorrow! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-16-2011, 01:29 PM	#365
charx2 Registered User Join Date: Apr 2010 Location: Mobile, AL Posts: 365	Re: Project 67 DRGNWGN - 67 Burban!! You ever figure out a way to mount your rear bags? I'm in the same situation as you and I'm trying to figure something out now. I might have to go with sleeved bags and mount over axel is all I can see.... __________________ ----------------------------------------- My 67 c10 Thread. http://67-72chevytrucks.com/vboard/s...d.php?t=409192

05-21-2011, 02:27 PM	#366
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project 67 DRGNWGN - 67 Burban!! nice progress kevin! look forward to more progress and pics! soon to be really nice!



Register or Log In To remove these advertisements.

05-22-2011, 11:49 AM	#368
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project 67 DRGNWGN - 67 Burban!! ..... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-22-2011, 11:59 AM	#369
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! show off... lol, that does look clean! nice work.. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-22-2011, 12:08 PM	#370
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project 67 DRGNWGN - 67 Burban!! Thanks... Yep there is some work involved but its all worth it in the end. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-22-2011, 01:05 PM	#372
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! just curious, what welder did you use for that? my friend has a hobart mig welder that i used to extend my panhard bar with. wondering if it could be good enough to weld those brackets on with. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-22-2011, 02:57 PM	#373
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! got a little done today, finished up the shaving of the firewall. still need to grind just a little bit, then its on to some filler. oh, and before i forget, what was that orange wire plugged up to? ..i was about to cut it off but cant remember what it was connected to..lol [IMG][/IMG] is there any spray can primer that i can spray on this bare metal before laying primer? i cant spray my eastwood until i get a compressor, but i really dont want to lay filler over bare metal. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 05-22-2011 at 03:00 PM.

05-22-2011, 03:17 PM	#374
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project 67 DRGNWGN - 67 Burban!! Orange wire went to the blower motor.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-22-2011, 03:31 PM	#375
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! good, its coming off then lol. hey, i noticed you shaved up a lot of bolts and holes on the driver side, did you move a lot of things around to get rid of those. i was looking at mine and it doesnt seem i could really get rid of any of them. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.