What did you do with your truck today, Part 3 - Page 154 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MiraclePieCo · 10-03-2019, 02:15 AM

Quote:

Originally Posted by DransportGarage

Nice! Very neat job.

Quote:

Originally Posted by fourspeedwagon

Looks great (from a milk tanker driver’s eyes)
Congratulations on the TOTM too. I was wondering when we’d find out. Pretty sure this is the first time I’ve actually voted in it

Thanks guys, I'm still on Cloud Nine.

Marty68 · 10-03-2019, 07:07 AM

Quote:

Originally Posted by MiraclePieCo

Installed my OEM-style rubber floor mat today. As a career gas tanker driver, for me rubber floors seem very appropriate for a truck. Durable and easy to clean too.

PS: That blue wire hanging down is for my windshield wipers, whenever I get around to installing them.

very nice congrats on totm

**idbeast** · 10-03-2019, 08:05 AM

my 5 minutes for the week summed up... Monday, got my bed cover installed. Tuesday got my exhaust rerouted under the newly installed rear bumper, only to have the fuel pump quit working on the way home resulting in a tow truck ride home. Wednesday decided the best way to get the in tank fuel pump out was to remove the bed boards and move the cross bed support rail back enough to get the pump out. Power not getting to the pump. completely rewired all fuel pump wiring from under dash to 1 1/2 inches from pump. Reinstalled the pump, then later today reinstall the bed wood.

Jim W

**idbeast** · 10-03-2019, 01:26 PM

Forgot to add that while waiting for the Tow Truck a truck flipped up a rock that chipped the paint on the top of the driver's side rear fender then bounced at shattered the outside rear view mirror.

*Jesse Z* · 10-04-2019, 04:38 PM

Quote:

Originally Posted by idbeast

Forgot to add that while waiting for the Tow Truck a truck flipped up a rock that chipped the paint on the top of the driver's side rear fender then bounced at shattered the outside rear view mirror.

AAARRRGGGHHHH! How and why does stuff like that happen????

DransportGarage · 10-05-2019, 01:42 PM

Just glued the window felts in after two days of generally screwing around with them. Good enough for who it's for:

Black_Sheep · 10-05-2019, 02:52 PM

I haven’t been 100% happy with the brakes on the ‘58 so I am going to replace the master cylinder with a new NAPA premium one. I also picked up some reman Raybestos calipers and Raybestos wheel cylinders. All of the brake hoses are going on too. Today all of the raw iron stuff is being prepped and painted so it will be ready to go on when I have the time.

regan56 · 10-05-2019, 04:10 PM

Working on rebuilding the front end of my legacy project 56. Just trying to punch the kingpins out now.

OE straight axle gonna have 2" drop springs and disc brake conversion.

MiraclePieCo · 10-05-2019, 05:22 PM

Quote:

Originally Posted by DransportGarage

Just glued the window felts in after two days of generally screwing around with them. Good enough for who it's for:

Clever holding system. Looks great.

DransportGarage · 10-05-2019, 10:37 PM

Quote:

Originally Posted by MiraclePieCo

Clever holding system. Looks great.

Thanks, MPC. Voted for you, and for me it wasn't even close. Congrats !!!

**oldman3** · 10-05-2019, 11:32 PM

Looks good Mark...Jim

MiraclePieCo · 10-06-2019, 05:15 AM

Quote:

Originally Posted by DransportGarage

Thanks, MPC. Voted for you, and for me it wasn't even close. Congrats !!!

Thanks! Just a matter of time until your truck is nominated and I'm voting for you!

69CST4x4SWB · 10-06-2019, 05:27 AM

Quote:

Originally Posted by MiraclePieCo

Installed my OEM-style rubber floor mat today. As a career gas tanker driver, for me rubber floors seem very appropriate for a truck. Durable and easy to clean too.

PS: That blue wire hanging down is for my windshield wipers, whenever I get around to installing them.

Looks great and congrats on the win! You had my vote btw... love panels! I drove for several years myself and also love the rubber floor mat. I have a new replacement for my '69 in the garage.

MiraclePieCo · 10-06-2019, 05:38 AM

Quote:

Originally Posted by 69CST4x4SWB

Looks great and congrats on the win! You had my vote btw... love panels! I drove for several years myself and also love the rubber floor mat. I have a new replacement for my '69 in the garage.

Thanks! Where in Oregon are you? I'm at the far south end of the state.

69CST4x4SWB · 10-06-2019, 05:52 AM

Quote:

Originally Posted by MiraclePieCo

Thanks! Where in Oregon are you? I'm at the far south end of the state.

I'm in the Eugene area, my mother-in-law lives in Ashland. You must be in the Medford area. I had a cousin that use to drive for Benito.

MARTINSR · 10-06-2019, 12:22 PM

Good stuff guys!

Brian

MiraclePieCo · 10-06-2019, 07:56 PM

I was invited to an informal local cruise to a nearby historic country store that was celebrating it's recent re-opening. There was quite an eclectic mix of cars.

MiraclePieCo · 10-06-2019, 08:02 PM

More pics. The red Malibu had a rear wheel fall off en route.

As you can see from the historic photo, there have been lots older cars than ours at this store!

lgoodso1 · 10-06-2019, 09:55 PM

Finally got my truck on the road after 5 year build. [ATTACH] Name: 62F2A6BE-399F-4739-9F5A-5C5582100F55.jpg
Views: 528
Size: 50.7 KB

[/ATTACH]

lgoodso1 · 10-06-2019, 10:00 PM

Finally got my truck on the road after 5 year build. Name: EEF40D70-7361-4F5A-8FC6-071FADE12DBF.jpg
Views: 603
Size: 51.6 KB

Name: D50EF06A-D79C-4DB9-866A-3343FE319EA2.jpg
Views: 597
Size: 49.9 KB

MARTINSR · 10-06-2019, 11:34 PM

I dig the VW!

I got a bunch done cleaning the garage out. Hope to get a wall painted tomorrow.

Brian

*Jesse Z* · 10-07-2019, 02:35 AM

Quote:

Originally Posted by lgoodso1

Finally got my truck on the road after 5 year build.

Oh my goodness - congratulations! That's the achievement we all strive for!

svr · 10-07-2019, 09:44 AM

Quote:

Originally Posted by lgoodso1

Finally got my truck on the road after 5 year build. Attachment 1947007

Attachment 1947008

Love your truck igoodso, Am thinking of a similar paint layout on mine. Do you have a broad side pic? I am trying to decide what to do between the body line and bed rail because they don't line up, wondering what it looks like from the side. Thanks

evilokc · 10-07-2019, 09:40 PM

drove the deathrattle to work after it sat basically idle for a month. good times

69CST4x4SWB · 10-08-2019, 04:02 AM

Quote:

Originally Posted by MiraclePieCo

I was invited to an informal local cruise to a nearby historic country store that was celebrating it's recent re-opening. There was quite an eclectic mix of cars.

Thanks for sharing all the photos! Looks like a good time was had...

10-03-2019, 08:05 AM	#3828
idbeast Senior Member Join Date: Oct 2016 Location: Olympia, WA Posts: 523	Re: What did you do with your truck today, Part 3 my 5 minutes for the week summed up... Monday, got my bed cover installed. Tuesday got my exhaust rerouted under the newly installed rear bumper, only to have the fuel pump quit working on the way home resulting in a tow truck ride home. Wednesday decided the best way to get the in tank fuel pump out was to remove the bed boards and move the cross bed support rail back enough to get the pump out. Power not getting to the pump. completely rewired all fuel pump wiring from under dash to 1 1/2 inches from pump. Reinstalled the pump, then later today reinstall the bed wood. Jim W

10-03-2019, 01:26 PM	#3829
idbeast Senior Member Join Date: Oct 2016 Location: Olympia, WA Posts: 523	Re: What did you do with your truck today, Part 3 Forgot to add that while waiting for the Tow Truck a truck flipped up a rock that chipped the paint on the top of the driver's side rear fender then bounced at shattered the outside rear view mirror.

10-05-2019, 01:42 PM	#3831
DransportGarage Registered User Join Date: Feb 2010 Location: Lebanon, Ohio Posts: 1,359	Re: What did you do with your truck today, Part 3 Just glued the window felts in after two days of generally screwing around with them. Good enough for who it's for: Attached Images __________________ Bob "It won't take long and it won't cost much." '55 3100 (383/700R4)--'55 Belair Sedan (350/4-speed)--'64 'Vette Conv. (327/4-speed)--'68 GTO Conv. (462/4-speed)--'69 Cutlass Conv. (350/TH350)--'06 'Vette Conv. (LS2/6-speed) Bob's Retirement Build - My 55 TF Bob's 700R4 Build (how-to)

10-05-2019, 02:52 PM	#3832
Black_Sheep Registered User Join Date: Jun 2017 Location: upper midwest Posts: 1,129	Re: What did you do with your truck today, Part 3 I haven’t been 100% happy with the brakes on the ‘58 so I am going to replace the master cylinder with a new NAPA premium one. I also picked up some reman Raybestos calipers and Raybestos wheel cylinders. All of the brake hoses are going on too. Today all of the raw iron stuff is being prepped and painted so it will be ready to go on when I have the time. Attached Images __________________ Mark Brother's keeper - '58 Stepside build Last edited by Black_Sheep; 10-07-2019 at 08:48 PM.

10-05-2019, 04:10 PM	#3833
regan56 Registered User Join Date: Oct 2003 Location: Regina Saskatchewan Canada eh! Posts: 171	Re: What did you do with your truck today, Part 3 Working on rebuilding the front end of my legacy project 56. Just trying to punch the kingpins out now. OE straight axle gonna have 2" drop springs and disc brake conversion.

10-05-2019, 11:32 PM	#3836
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: What did you do with your truck today, Part 3 Looks good Mark...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

10-06-2019, 12:22 PM	#3841
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: What did you do with your truck today, Part 3 Good stuff guys! Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

10-06-2019, 07:56 PM	#3842
MiraclePieCo Registered User Join Date: Sep 2014 Location: USA Posts: 2,249	Re: What did you do with your truck today, Part 3 I was invited to an informal local cruise to a nearby historic country store that was celebrating it's recent re-opening. There was quite an eclectic mix of cars. Attached Images __________________ 1951 Chevy Panel Truck

10-06-2019, 08:02 PM	#3843
MiraclePieCo Registered User Join Date: Sep 2014 Location: USA Posts: 2,249	Re: What did you do with your truck today, Part 3 More pics. The red Malibu had a rear wheel fall off en route. As you can see from the historic photo, there have been lots older cars than ours at this store! Attached Images __________________ 1951 Chevy Panel Truck Last edited by MiraclePieCo; 10-06-2019 at 08:07 PM.

10-06-2019, 09:55 PM	#3844
lgoodso1 Registered User Join Date: Jan 2014 Location: Drummonds, TN Posts: 61	Re: What did you do with your truck today, Part 3 Finally got my truck on the road after 5 year build. [ATTACH][/ATTACH] Attached Images

10-06-2019, 10:00 PM	#3845
lgoodso1 Registered User Join Date: Jan 2014 Location: Drummonds, TN Posts: 61	Re: What did you do with your truck today, Part 3 Finally got my truck on the road after 5 year build.

10-06-2019, 11:34 PM	#3846
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: What did you do with your truck today, Part 3 I dig the VW! I got a bunch done cleaning the garage out. Hope to get a wall painted tomorrow. Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

10-07-2019, 09:40 PM	#3849
evilokc Registered User Join Date: Mar 2013 Location: albuquerque New Mexico Posts: 522	Re: What did you do with your truck today, Part 3 drove the deathrattle to work after it sat basically idle for a month. good times

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.