Show us your projects

[kylemontoya]

Originally Posted by junkadelic

Thanks ,, the patina is insane,,I have a simple rule in life,, find the hotest og paint surface rust vehicle you can,,, slamm it and Roll it... I have done enough long term restorations ,, I just wanna enjoy sweet old slammed cars that happen to look abandoned,,,Its just my my thing

this is so awesome, exactly what im going for.

[pvienneau]

Hey finnally a presovationist like myself. I agree with the theory. Nice truck
Posted via Mobile Device

[junkadelic]

Thing is , if I am ever runnin from the cops , I can just pull into a junkyard & ditch the lights,,,open field or woods will also do...Automatic abandoned old car!!!! Learned that from my old Hot VW"s days runnin big engine bugs...a tail light kill switch helps too!
Posted via Mobile Device

[gag1025]

These are 3 photos from my '53 Chevy truck project. We are using the frame from a friends '53 Chevy truck. He wants my frame because he likes the way it is set up. The frame we are using has been blasted and painted. We put the Chassis Engineering IFS on to make sure everything fit. We will dissasemble it and paint it and then re-attach it. This is a complete bolt on unit and was easy to install once you get the initial 2 front holes drilled on the frame at the proper distance. The instructions make it a user friendly install. I have a 1976 Camaro rear differential that I will buff all the surface rust off and paint and install. then it is a matter of transferring the engine and transmission, and body, painting, installing the wooden bed and upholstering the inside. I will also have the steering column shaft shortened as I am going to make a full console and install a B&M Floor shifter. Great project and it keeps me home.

[redmagne]

Here's mine...

[sweet70beast]

Hey Redmagne, what is your gas tank out of?

[redmagne]

it is from an 84 s10 blazer.... non injected.

[andrew_k]

Picked up this '59 Apache in November to work on with my dad. There's a lot of work to do. Never had much car experience, but figured I'd do it right. Learning a lot from the board that's not covered in other places.

[fat57]

Very nice looks cool

[55Cameo]

here's mine. about to go under the knife soon. a runner and driver

[buggy5872]

figured I would update on my project. I don't post much on this site just look around and read....

[youngrodder]

Originally Posted by buggy5872

figured I would update on my project. I don't post much on this site just look around and read....

Very cool...you might have trouble fitting that in your garage. ha ha
I like where it's heading

Marc

[buggy5872]

It's garage days are long gone. Both height and width wise. Just got to convince the wife to let me buy the building I have been looking at.

[youngrodder]

Good luck with that...

[waybad]

post more picts please!!

[buggy5872]

Originally Posted by waybad

post more picts please!!

click on the pic and it will take you to my webshots build album

[waybad]

Originally Posted by buggy5872

click on the pic and it will take you to my webshots build album

you are a genius

[buggy5872]

Originally Posted by waybad

you are a genius

For the click on the picture thing or the truck.....lol

[19723DR]

Here is my 51 sub project. It started out being an Air Force vehicle ended up with me, don't know much more. I've managed to slide a S-10 frame with a 4.3 Vortec under it. I should have it on the road by summer.

[youngrodder]

19723DR..

The Burb looks great.
Best of luck getting it road worthy this summer.

Marc

[1954Chev]

Here is my old truck
1954 3100
5.7 LT1
4L60E
tci mustang II with bags
rear 4 link with shockwaves
6" rear step boxed frame
Fatty wide whites all round
Recessed firewall
Mostly stock body with mild mods

[youngrodder]

Originally Posted by 1954Chev

Here is my old truck
1954 3100
5.7 LT1
4L60E
tci mustang II with bags
rear 4 link with shockwaves
6" rear step boxed frame
Fatty wide whites all round
Recessed firewall
Mostly stock body with mild mods

Nice choice in drivetrain. I'm running a 95 Vette LT1 w/a 4l60E as well.
Looks like a great project.

Good luck
Marc

[1954Chev]

did you changed out your Opti or gamble on the OEM. Mine is a 1994 with non venting. I am wrestling with the idea of changing to MSD or Delteq conversion.

[youngrodder]

Originally Posted by 1954Chev

did you changed out your Opti or gamble on the OEM. Mine is a 1994 with non venting. I am wrestling with the idea of changing to MSD or Delteq conversion.

To be honest, I think that the Opti horror stories are a bit over stated. I have the factory (vented) unit. My motor even sat for 7yrs and I didn't have any problems. Maybe the non-vented are a bigger pain. I say save your money and try it out first. Are you going to hack your harness or buy an aftermarket?

Marc

[1954Chev]

more pics