What did you do to your truck today? - Page 198 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

markeb01 · 04-02-2012, 02:06 AM

Can't wait to see it on the truck.

Quote:

Originally Posted by Alan's Classic

What I got done today

Camaro_nut2001 · 04-02-2012, 07:41 AM

Quote:

Originally Posted by Alan's Classic

What I got done today

Now that looks nice!!

Camaro_nut2001 · 04-02-2012, 07:47 AM

Quote:

Originally Posted by SRVBLUES64

I had plans to do the wood bed floor but I ended up fitting the left front fender and working on that most ogf the day, Im still having isues with my new 600 cfm holley avenger carb it seems to idle okay but once I put it in gear and it stalls or I can lunge forward has if I was taking of it just stops HELP!!!!!!!!!!!!

On your carb problems if it were me i'd check the float levels first then adjust the idle air screws to your motor. It sounds to me like your gettin enough air but not enough fuel. Is this a new Holley?

derail · 04-03-2012, 08:48 PM

Quote:

Originally Posted by boat

cut and fabricated metal for the radiator support

boat, Those look awesome. You seriously could make and sell them. They all rust in the same spots. Right?

chainsaw · 04-03-2012, 09:20 PM

Sanded the front bumper, ready to prime. Left the truck in the garage to miss the hail and tornadoes.

**MisterC** · 04-03-2012, 10:24 PM

Riveted a patch in place of the breather hole in the dual snorkel air cleaner; sanded and primed the 1 1/4" sway bar, ordered some new door panel screws on Ebay and mocked up the side trim that I received from GMCNUT.

mud.man.rj · 04-03-2012, 10:35 PM

No truck action today because bought Momma some new couches and rearranged the living room so if she is happy my truck gets happier with more parts. Got one door installed so tomorrow start on the other.

boat · 04-03-2012, 11:05 PM

more surgery on sheet metal

boat · 04-03-2012, 11:08 PM

pic

boat · 04-03-2012, 11:09 PM

http://67-72chevytrucks.com/vboard/a...1&d=1333508954

tincan1966 · 04-04-2012, 07:27 AM

Finished the last of the "mock up" stages. Pulled the body off-out to blasters for clean up,while I finish the chassis. Hopefully, the body will be back in a few days and I'll have the frame ready to be prepped and painted, so will just switch out.

66-PMD-GMC · 04-04-2012, 09:26 AM

Walked by it going to work.
She looks lonely just sitting there with her motor broke....

MalibuKasey · 04-04-2012, 10:17 AM

I ordered parts finally! A Monster rebuild kit for the 700R4, TV Cable bracket, lowered Sway bar mount brackets, CPP tranny crossmember, and right after lunch.... Capt. Fabs Powersteering adapter kit.

fasteddie1964 · 04-04-2012, 05:05 PM

Drove her to work today.

198plus · 04-04-2012, 05:13 PM

I installed my 373 gear and Eaton posi carrier today

suzq044 · 04-04-2012, 05:13 PM

Nothing to the truck itself. But we got the master-engine kit from Northern via brown-truck today

XtechX · 04-04-2012, 08:09 PM

What I did today....I drove my truck!!!!!!!!....The first time legally, I took it down for a front end alignment and probably put 30 miles on it or so without any real problems. Except for some awful speedometer cable noise, I unhooked it from the cluster and the noise stopped. What a good day...It was the moment I've been waiting for, for the past 1 1/2 years.

Breadstick · 04-04-2012, 08:30 PM

Put the bed in. None of the cross sills were in the right place, so I kind of had to make it work. I drilled new holes in the bed strips and the cross sills and put the hardware in upside down, but it worked and it's ready to haul stuff. It's not the prettiest but it'll do what I need it to.

Also, this is all in my "project Charlotte" build thread.

markeb01 · 04-04-2012, 08:40 PM

Good for you. It’s a great feeling finally achieving that milestone.

Quote:

Originally Posted by XtechX

What I did today....I drove my truck!!!!!!!!....The first time legally, I took it down for a front end alignment and probably put 30 miles on it or so without any real problems. Except for some awful speedometer cable noise, I unhooked it from the cluster and the noise stopped. What a good day...It was the moment I've been waiting for, for the past 1 1/2 years.

cb1965 · 04-04-2012, 09:46 PM

finally started installing the AAW kit. waiting on wheels to get back from powder coat so i can install my white walls

... im getting closer to droping it completely and adding disk brakes. after the wiring install its on to the dreaded clean up of the donor crossmember.
heres a pic

**66ChevyMax** · 04-04-2012, 11:54 PM

Test fit the bed.

Posted via Mobile Device

RAYDAY · 04-05-2012, 02:02 AM

sorry for dark pics. welll today i relized ther was a few guys at the shop so i got them to help dig the cab out of the coner and flip it on its back and 3 hrs later of tourch and putty knife wire wheeling and a stripper disc i got this far

BillyDeluxe · 04-05-2012, 06:33 AM

Quote:

Originally Posted by banno

I tested the wiring of my new tow-bar. My East-Germany micro mobile home fits perfect to the C10, isn't it?

Nice to see you here. I am the guy who visited you from Nuremberg, remember? How is the truck running?
Andy

_1966ChevyPU · 04-05-2012, 10:13 PM

Quote:

Originally Posted by XtechX

What I did today....I drove my truck!!!!!!!!....The first time legally, I took it down for a front end alignment and probably put 30 miles on it or so without any real problems. Except for some awful speedometer cable noise, I unhooked it from the cluster and the noise stopped. What a good day...It was the moment I've been waiting for, for the past 1 1/2 years.

Man, I can not wait for the day I get to enjoy that moment.

_1966ChevyPU · 04-05-2012, 10:15 PM

I got more parts in today and was able to find the hardest part there probably is to track down for the truck just a couple hours from the house.

04-03-2012, 09:20 PM	#4930
chainsaw Registered User Join Date: Jul 2010 Location: Carrollton tx Posts: 216	Re: What did you do to your truck today? Sanded the front bumper, ready to prime. Left the truck in the garage to miss the hail and tornadoes.

04-03-2012, 10:24 PM	#4931
MisterC Senior Member Join Date: Sep 2011 Location: Hanford, CA Posts: 1,027	Re: What did you do to your truck today? Riveted a patch in place of the breather hole in the dual snorkel air cleaner; sanded and primed the 1 1/4" sway bar, ordered some new door panel screws on Ebay and mocked up the side trim that I received from GMCNUT. __________________ Poor and content is Rich...and Rich enough! - William Shakespeare 1966 C10 Custom Cab "Luigi" Big Window - SWB Fleetside 350 V-8 - Powerglide My not so much a build thread as a "Slow Progression Thread":http://67-72chevytrucks.com/vboard/s...d.php?t=486894

04-03-2012, 10:35 PM	#4932
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today? No truck action today because bought Momma some new couches and rearranged the living room so if she is happy my truck gets happier with more parts. Got one door installed so tomorrow start on the other.

04-03-2012, 11:05 PM	#4933
boat Registered User Join Date: Apr 2010 Location: bartlett Tn Posts: 276	Re: What did you do to your truck today? more surgery on sheet metal Attached Images __________________ STEVES 63 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=412554 GIBSON63 YouTube channel https://www.youtube.com/user/1gibsonl4

04-03-2012, 11:08 PM	#4934
boat Registered User Join Date: Apr 2010 Location: bartlett Tn Posts: 276	Re: What did you do to your truck today? pic Attached Images __________________ STEVES 63 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=412554 GIBSON63 YouTube channel https://www.youtube.com/user/1gibsonl4

04-03-2012, 11:09 PM	#4935
boat Registered User Join Date: Apr 2010 Location: bartlett Tn Posts: 276	Re: What did you do to your truck today? http://67-72chevytrucks.com/vboard/a...1&d=1333508954 Attached Images __________________ STEVES 63 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=412554 GIBSON63 YouTube channel https://www.youtube.com/user/1gibsonl4

04-04-2012, 07:27 AM	#4936
tincan1966 Registered User Join Date: Oct 2010 Location: Independence,KS Posts: 1,477	Re: What did you do to your truck today? Finished the last of the "mock up" stages. Pulled the body off-out to blasters for clean up,while I finish the chassis. Hopefully, the body will be back in a few days and I'll have the frame ready to be prepped and painted, so will just switch out.

04-04-2012, 09:26 AM	#4937
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: What did you do to your truck today? Walked by it going to work. She looks lonely just sitting there with her motor broke.... __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

04-04-2012, 10:17 AM	#4938
MalibuKasey Artist Join Date: Jan 2010 Location: Rockwell NC Posts: 422	Re: What did you do to your truck today? I ordered parts finally! A Monster rebuild kit for the 700R4, TV Cable bracket, lowered Sway bar mount brackets, CPP tranny crossmember, and right after lunch.... Capt. Fabs Powersteering adapter kit. __________________ 66 Chevy C10 283ci~cough~ SBW Fleet Buttercup '66

04-04-2012, 05:05 PM	#4939
fasteddie1964 Registered User Join Date: Feb 2012 Location: North Georgia Posts: 72	Re: What did you do to your truck today? Drove her to work today. __________________ Friends don't let friends drive Fords

04-04-2012, 05:13 PM	#4940
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Re: What did you do to your truck today? I installed my 373 gear and Eaton posi carrier today __________________ My Build http://67-72chevytrucks.com/vboard/s...d.php?t=346597 https://www.facebook.com/pages/198-C...1434001?ref=hl Last edited by 198plus; 04-04-2012 at 06:15 PM.

04-04-2012, 05:13 PM	#4941
suzq044 Resident Photoshop Nerd Join Date: Sep 2007 Location: Gordon, GA Posts: 723	Re: What did you do to your truck today? Nothing to the truck itself. But we got the master-engine kit from Northern via brown-truck today __________________ PJ - 1966 C10 Panel -- Max² - 1964 Jeep Wagoneer Panel-delivery -- Waiting his turn Last edited by suzq044; 04-04-2012 at 05:32 PM.

04-04-2012, 08:09 PM	#4942
XtechX Registered User Join Date: Jan 2011 Location: Edmore, Michigan Posts: 300	Re: What did you do to your truck today? What I did today....I drove my truck!!!!!!!!....The first time legally, I took it down for a front end alignment and probably put 30 miles on it or so without any real problems. Except for some awful speedometer cable noise, I unhooked it from the cluster and the noise stopped. What a good day...It was the moment I've been waiting for, for the past 1 1/2 years. __________________ Opportunity usually comes disguised....As hard work!!!

04-04-2012, 08:30 PM	#4943
Breadstick Registered User Join Date: Mar 2012 Location: Scott AFB, IL Posts: 210	Re: What did you do to your truck today? Put the bed in. None of the cross sills were in the right place, so I kind of had to make it work. I drilled new holes in the bed strips and the cross sills and put the hardware in upside down, but it worked and it's ready to haul stuff. It's not the prettiest but it'll do what I need it to. Also, this is all in my "project Charlotte" build thread.

04-04-2012, 09:46 PM	#4945
cb1965 Registered User Join Date: Mar 2010 Location: san jose, california Posts: 508	Re: What did you do to your truck today? finally started installing the AAW kit. waiting on wheels to get back from powder coat so i can install my white walls ... im getting closer to droping it completely and adding disk brakes. after the wiring install its on to the dreaded clean up of the donor crossmember. heres a pic Attached Images __________________ '66 chevy lwb c10 '65 chevy lwb c20



Register or Log In To remove these advertisements.

04-04-2012, 11:54 PM	#4946
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: What did you do to your truck today? Test fit the bed. Posted via Mobile Device __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

04-05-2012, 02:02 AM	#4947
RAYDAY Registered User Join Date: Feb 2012 Location: Carnegie PA Posts: 130	Re: What did you do to your truck today? sorry for dark pics. welll today i relized ther was a few guys at the shop so i got them to help dig the cab out of the coner and flip it on its back and 3 hrs later of tourch and putty knife wire wheeling and a stripper disc i got this far Attached Images __________________ 96 s10 static drop smooth and blue 99 silverado nothing stock layed out on 24s 65 c10 bagged patina driver http://www.myrideisme.com/Garage/az480 half-assed build thread http://67-72chevytrucks.com/vboard/s...=1#post5206828

04-05-2012, 10:15 PM	#4950
_1966ChevyPU Registered User Join Date: Feb 2012 Location: Chandler, AZ Posts: 97	Re: What did you do to your truck today? I got more parts in today and was able to find the hardest part there probably is to track down for the truck just a couple hours from the house. __________________ Bryan (Redneck) '66 Chevy Longbed Fleetside '12 Dodge Ram 3500 '08 BigDog Pitbull '11 Cargomate Trailer (Toy Hauler)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.