Lower A-arm ??? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BACKYARD88 · 08-08-2007, 04:48 PM

i USED 1/4" pipe and 1/4" plate for the bottom

pissonNOS · 08-08-2007, 08:00 PM

how are you guys determining where to cut for the pipe?

BACKYARD88 · 08-08-2007, 10:33 PM

I just centered the pipe over the spring pocket and drew around it. Then I made the top plate and bolted it on, bolted the bag in the lower arm an bolted it on. Then I lifted the lower arm until the bag touched the upper plate and drew around the bag to mark for the mounting holes and air line hole in the plate. This way it is aligned perfectly. Hope that makes sense, it's hard typing something this long on my pda

pissonNOS · 08-08-2007, 11:20 PM

some what makes sense when ur talking upper plate im assuming the one bolted to the crossmember? I already have the bag in the front so basically what ur saying is now draw a circle around the bag? and that should give me a rough idea?

Spray-Bomb · 08-08-2007, 11:39 PM

my pipe is 3/16" so I'll use 3/16 plate for the bottom

Thanks for the pics / info Mike

BACKYARD88 · 08-09-2007, 08:26 AM

Quote:

Originally Posted by pissonNOS

some what makes sense when ur talking upper plate im assuming the one bolted to the crossmember? I already have the bag in the front so basically what ur saying is now draw a circle around the bag? and that should give me a rough idea?

Yeah, the one bolted to the cross member. If you bought the upper plate pre-made it should be centered with the spring pocket. I'd bolt up the lower arm and make sure, then just center your pipe over the pocket.

Quote:

Originally Posted by Spray-Bomb

...Thanks for the pics / info Mike

No problem Matt.

Spray-Bomb · 08-09-2007, 08:58 AM

Quote:

Originally Posted by pissonNOS

some what makes sense when ur talking upper plate im assuming the one bolted to the crossmember? I already have the bag in the front so basically what ur saying is now draw a circle around the bag? and that should give me a rough idea?

I like mikes idea as well, but I plan I taking my pipe & centering it over the original pocket in the A-arm and trace around it so I know where to cut

But I haven't got that far yet, I may wind up doing it like Mike (like mike... ha ha , I made a funny)

BACKYARD88 · 08-09-2007, 09:06 AM

[QUOTE=Spray-Bomb;2301388]I like mikes idea as well, but I plan I taking my pipe & centering it over the original pocket in the A-arm and trace around it so I know where to cut
QUOTE]

I just caught what he's saying. I thought he was just installing but he's already all hooked up and just wants to mod the control arms. Duh. Yeah, I'm going with he original plan. Center the pipe over the pocket and draw around it

Spray-Bomb · 08-13-2007, 02:04 PM

ok guys, here it is

I'm back from see'n my brother & bag'n the front of my truck

I took a lot of pics, so I'm not gonna post em all... Here is a link

Ima skip the disassembly & start with the good stuff

Cut'n the bump stop off

Bolt the upper plate to the bag & mock it up

Made the lower cup

Spray-Bomb · 08-13-2007, 02:09 PM

Mocked up the lower cup & A-arm, so we could trace where to cut

Cut'n out

We leveled the cup to the bottom edge of the A-arm

Spray-Bomb · 08-13-2007, 02:11 PM

Welded up

Painted

Spray-Bomb · 08-13-2007, 02:15 PM

Drilled a hole it the cross member & put a grommet in for the hose to run through

Bag installed for good

My temp for airing them up

Spray-Bomb · 08-13-2007, 02:17 PM

Bolting up the lower A-arm

Putting it all back together

Spray-Bomb · 08-13-2007, 02:19 PM

Done

Spray-Bomb · 08-13-2007, 02:23 PM

I couldn't get a pic of it aired out on teh ground, because my brothers air compressor didn't have the umph to get my truck up very high

But here it is on the trailer

It may go a little lower, but it's sitting on the swivel for the winches hook
And it's just about to hit the headers & bind the upper ball-joint

BACKYARD88 · 08-13-2007, 02:24 PM

Looks good dude! Now it's time for the back!!

Spray-Bomb · 08-13-2007, 02:26 PM

Yup, but that'll have to wait till I get it on the SWB frame

Frizzle Fry · 08-13-2007, 04:58 PM

Wow, nice work on the arms. Do you have drop spindles? ...and that line routing through the crossmember looks familiar

L0WRIDE · 08-13-2007, 06:11 PM

nice work !!!!

Spray-Bomb · 08-13-2007, 09:13 PM

Thanks guys

Yeah, I kinda stole the grommet idea... lol

No drop spindles

*Shane* · 08-13-2007, 09:17 PM

lookin' good!

Spray-Bomb · 09-17-2008, 11:09 AM

Do any of you mods wanna make a FAQ out of this thread from post 34 though 40 ???

I find myself digging it back up & posting links to it fairly often

Just a thought, Matt

Frizzle Fry · 09-17-2008, 11:16 AM

I brought it to their attention for ya.

Spray-Bomb · 09-17-2008, 11:33 AM

Thank you sir

Spray-Bomb · 11-14-2008, 02:05 AM

Frizzle, if you wouldnt mind bringing it up to them again I would appreciate it, as I just had to dig it up again for reference in a thread

08-08-2007, 04:48 PM	#26
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: Lower A-arm ??? i USED 1/4" pipe and 1/4" plate for the bottom __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

08-08-2007, 08:00 PM	#27
pissonNOS senior member Join Date: Feb 2003 Location: fort macleod alberta Posts: 2,770	Re: Lower A-arm ??? how are you guys determining where to cut for the pipe? __________________ 69 GMC bagged

08-08-2007, 10:33 PM	#28
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: Lower A-arm ??? I just centered the pipe over the spring pocket and drew around it. Then I made the top plate and bolted it on, bolted the bag in the lower arm an bolted it on. Then I lifted the lower arm until the bag touched the upper plate and drew around the bag to mark for the mounting holes and air line hole in the plate. This way it is aligned perfectly. Hope that makes sense, it's hard typing something this long on my pda __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

08-08-2007, 11:20 PM	#29
pissonNOS senior member Join Date: Feb 2003 Location: fort macleod alberta Posts: 2,770	Re: Lower A-arm ??? some what makes sense when ur talking upper plate im assuming the one bolted to the crossmember? I already have the bag in the front so basically what ur saying is now draw a circle around the bag? and that should give me a rough idea? __________________ 69 GMC bagged Last edited by pissonNOS; 08-08-2007 at 11:22 PM.

08-08-2007, 11:39 PM	#30
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Lower A-arm ??? my pipe is 3/16" so I'll use 3/16 plate for the bottom Thanks for the pics / info Mike __________________ Just not low enough... ----------------------------- Sinister Killer

08-09-2007, 09:06 AM	#33
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: Lower A-arm ??? [QUOTE=Spray-Bomb;2301388]I like mikes idea as well, but I plan I taking my pipe & centering it over the original pocket in the A-arm and trace around it so I know where to cut QUOTE] I just caught what he's saying. I thought he was just installing but he's already all hooked up and just wants to mod the control arms. Duh. Yeah, I'm going with he original plan. Center the pipe over the pocket and draw around it __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

08-13-2007, 02:04 PM	#34
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	http://67-72chevytrucks.com/vboard/newreply.php?do=newreply&noquotRe: Lower A-arm ??? ok guys, here it is I'm back from see'n my brother & bag'n the front of my truck I took a lot of pics, so I'm not gonna post em all... Here is a link Ima skip the disassembly & start with the good stuff Cut'n the bump stop off Bolt the upper plate to the bag & mock it up Made the lower cup __________________ Just not low enough... ----------------------------- Sinister Killer

08-13-2007, 02:09 PM	#35
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Lower A-arm ??? Mocked up the lower cup & A-arm, so we could trace where to cut Cut'n out We leveled the cup to the bottom edge of the A-arm __________________ Just not low enough... ----------------------------- Sinister Killer

08-13-2007, 02:11 PM	#36
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Lower A-arm ??? Welded up Painted __________________ Just not low enough... ----------------------------- Sinister Killer

08-13-2007, 02:15 PM	#37
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Lower A-arm ??? Drilled a hole it the cross member & put a grommet in for the hose to run through Bag installed for good My temp for airing them up __________________ Just not low enough... ----------------------------- Sinister Killer

08-13-2007, 02:17 PM	#38
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Lower A-arm ??? Bolting up the lower A-arm Putting it all back together __________________ Just not low enough... ----------------------------- Sinister Killer

08-13-2007, 02:19 PM	#39
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Lower A-arm ??? Done __________________ Just not low enough... ----------------------------- Sinister Killer

08-13-2007, 02:23 PM	#40
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Lower A-arm ??? I couldn't get a pic of it aired out on teh ground, because my brothers air compressor didn't have the umph to get my truck up very high But here it is on the trailer It may go a little lower, but it's sitting on the swivel for the winches hook And it's just about to hit the headers & bind the upper ball-joint __________________ Just not low enough... ----------------------------- Sinister Killer

08-13-2007, 02:24 PM	#41
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: Lower A-arm ??? Looks good dude! Now it's time for the back!! __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

08-13-2007, 02:26 PM	#42
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Lower A-arm ??? Yup, but that'll have to wait till I get it on the SWB frame __________________ Just not low enough... ----------------------------- Sinister Killer



Register or Log In To remove these advertisements.

08-13-2007, 04:58 PM	#43
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Lower A-arm ??? Wow, nice work on the arms. Do you have drop spindles? ...and that line routing through the crossmember looks familiar

08-13-2007, 06:11 PM	#44
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Lower A-arm ??? nice work !!!! __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

08-13-2007, 09:13 PM	#45
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Lower A-arm ??? Thanks guys Yeah, I kinda stole the grommet idea... lol No drop spindles __________________ Just not low enough... ----------------------------- Sinister Killer

08-13-2007, 09:17 PM	#46
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Lower A-arm ??? lookin' good!

09-17-2008, 11:09 AM	#47
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Lower A-arm ??? Do any of you mods wanna make a FAQ out of this thread from post 34 though 40 ??? I find myself digging it back up & posting links to it fairly often Just a thought, Matt __________________ Just not low enough... ----------------------------- Sinister Killer

09-17-2008, 11:16 AM	#48
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Lower A-arm ??? I brought it to their attention for ya.

09-17-2008, 11:33 AM	#49
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Lower A-arm ??? Thank you sir __________________ Just not low enough... ----------------------------- Sinister Killer

11-14-2008, 02:05 AM	#50
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Lower A-arm ??? Frizzle, if you wouldnt mind bringing it up to them again I would appreciate it, as I just had to dig it up again for reference in a thread __________________ Just not low enough... ----------------------------- Sinister Killer

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.