90 burb (( daily dragger))

[72 CustomCamper]

I might have to ride over and hang out some this weekend...


Chuck

[87 dually burb]

hoping to weld them up saturday after helping friends move should have them back on sunday and finish cutting the inner fender for clearance
pic's sunday after installed/clearanced

[87 dually burb]

still waiting on my welder to get them done

[87 dually burb]

took them to local guy

fully welded around


wrapped the end with 3/16 strap

not bad for $150 steel/welded

[72 CustomCamper]

That's cool. Are you going to have it ready for the cruise in Saturday if it doesn't rain?


Chuck

[87 dually burb]

have thur and fri off so if the rain stops I'll have them in
see you sat what time you rolling in ?

[72 CustomCamper]

I should be there around 4:30 to set things up...


Chuck

[tvblazer78]

Good work man. Let us know how it works..

[87 dually burb]

updated pic's

sits on crossmember with hear box in place

air dam 1" from ground
thanks chuck for stopping by and checking it out
needs 5.5"s to be level has 2"s to frame so a 3" notch should be good for now
makes the flip kit look like a lift kit

[72 CustomCamper]

It was fun watching somebody else work for a change. LOL Here's the shot your son warned you I took...

[justpball]

nice bro! get that back done!!!! looking sick.

[SBTork]

damn that burb is low, should look perfect once the rear is down too. Nice work

[rddiaz]

grinder and a sawall.... mans best friends............coming out nice...

[87 dually burb]

looks like another week of rainy days so may not get the rear done till middle next week the local welder I found does body drops and and custom truck so hopin to work something out to get it all done at 1 time - notch,cover,weld up all rain gutter-sunvisor holes,rollpan,tail lights
will see work is slow so play cash is tight this month

[justpball]

update?

[87 dually burb]

all new carpet/vinyl in house done
new french door's done
16' x 28' deck done
had ac duct's cleaned and serviced
will be back at it later in the week
(still have to paint a room or two this month)
update on burb chasing a leak down right now
hoping to have the rear notch in 2 weeks or so
working out all welding with one shop so checking on timing to have all done at once

[87 dually burb]

2 new bathroom vanity/tops/faucets
redid both flower beds out front
planted and seeded lawn twice in 2 weeks
hoping to get working on truck this weekend
honey do list is about done for this year

[justpball]

make sure and post pics of the rear notch, i am planning mine right now and want to see what you do.

[87 dually burb]

hoping to cut floor out thur or fri
got side track found a cheap crew cab long bed truck
needed a DD/truck while floor is out

found some rust around inner wheel tubs but all will be cut out when the small bridge is put in

will have the plasma cutter thur-sat may cut up more stuff then
wife said dont do any thing to crew cab till the burb is back on the road

[72 CustomCamper]

I guess you won't have the burb back together by the cruise in Saturday then...


Chuck

[justpball]

why did you wrap the outer a-arms with the metal?

[87 dually burb]

I had to cut th rain gutter off the arms for the 15" rallies to fit so I wrapped it with a metal band and cut it to fit had to trim about a 5/16 off keep it from rubbing
not lookin like it I let the inspection run out so I'm just going to cut the floor do a notch and bags/mount done to inspect for july

[87 dually burb]

got a early start on the weekend work

[justpball]

nice, i thought you were going to cut it back far enough to raise the thrid seat up...

[87 dually burb]

I am that is all I got cut before the thunder storms rolled through all this week
it will be cut even across the back of the wheel wells and enough in the front to still fit under seat if you look at the wheel opening I have about 8" in front of the wheel well that will be filled in flat for more leg room and future speakers