Porterbuilt- Hot Deals on Misc. Air Suspension Parts-Till they are gone!

[ed69]

Question about two way switch and gauge. I'm doing my first bag set up and have the ART 4way manifold coming this week. Will this two way switch and harness work with that 4way? Or do I need a 4way switch? Wasn't going to tee bags. Just want to be able to drop front and back. No FBSS stuff. Thanks. If it will work, I will take it. Hope this isn't too dumb of a question.

[PBFAB.COM]

Originally Posted by ed69

Question about two way switch and gauge. I'm doing my first bag set up and have the ART 4way manifold coming this week. Will this two way switch and harness work with that 4way? Or do I need a 4way switch? Wasn't going to tee bags. Just want to be able to drop front and back. No FBSS stuff. Thanks. If it will work, I will take it. Hope this isn't too dumb of a question.

It will not control your 4-way manifold valve. The 4-way valve has two connectors, one to control 2 valves for the front, and one to control two valves for the rear. This gauge and dual switch set-up will only plug into one connector and control 2 valves.

[Inverter]

Is there a set of notches and what do they fit?

[1sik52]

Yea, what will those notches fit? I have a 70 Blazer that I want to install some 22x12s on. Will they work?

[project 67 sub]

looks like the notches are for a 73-87 frame.

[PBFAB.COM]

Originally Posted by Inverter

Is there a set of notches and what do they fit?

They were built for an early 60's panel truck (straight rear rails). They will fit a 73-87 as well. The notch would need to be trimmed down (too tall) for a 73-87 frame, but will work.

[AVS_JASON]

I'll take that Dropmember you have for $100....

[Kontrol Phreaks]

Sorry I got the dropmember for $99.95 earlier Jason. I will sell it to you for 101.00 if you want it.