new engine for my truck - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nxtruck · 02-05-2011, 11:12 PM

Man, that much nitrous on top of 500 + inches is NEVER the wrong thing to do! That thing ought to fly!!! I hope your tires and suspension are up to it. Let us know how it runs!!

bigboybodry · 02-05-2011, 11:21 PM

31/10.5w on a 16" wide wheel. Coil over shocks,moroso trick springs,reinforced trailing arms,and a anti-roll bar to be installed. I hope I can get it to the ground with all this
Posted via Mobile Device

bigboybodry · 02-06-2011, 01:24 AM

this is off a friends phone the engine doesn't want to run with a 1379 cfm prosystems carb on it but i had to post it so you all could get a kick out of my good friend poke chop.
http://s966.photobucket.com/albums/a...0203-17491.mp4

nxtruck · 02-08-2011, 12:43 AM

Quote:

Originally Posted by bigboybodry

31/10.5w on a 16" wide wheel. Coil over shocks,moroso trick springs,reinforced trailing arms,and a anti-roll bar to be installed. I hope I can get it to the ground with all this
Posted via Mobile Device

31 x 10.5W on a 16" wheel? I haven't heard of anyone putting a 10.5W on anything wider than a 14". What are you running for front shocks? It sounds like you've got the suspension covered. That thing ought to fly!! I like the bench seat in it from your video. I recently put a bench seat in mine to replace the racing buckets that were in it. It sure is a lot more comfortable when rolling to the cruise nights.

bigboybodry · 02-09-2011, 10:19 PM

single qa1 on the front and strange single on the rear.I am going to c-notch the rear frame and install a good anti-roll. I would like to add a good set of tubular control arms on the front and do something with the rake of the truck(its setting about level). not trying to say anything bad about the fatman front end but I just don't like the look of the front wheels/tires setting that far under the truck. I have a long way to go but man it sure feels good to hear it run.

nxtruck · 02-10-2011, 01:35 PM

Sounds good too!! Keep us up to date on your progress!!

bigboybodry · 02-18-2011, 10:50 PM

well my new prosystems carb. will be here thursday

bigboybodry · 02-21-2011, 12:16 AM

Well guys I found the problem and it wasn't my carb. My crazy tell forgot I did a custom cam with a 4-7 swap when I ran the wires at 12:00 the night I fired it off for the first time I guess. I wish you all could hear this thing but all I have is my phone cam we lost our camcorder in the tornado. This thing sounds awsome!!!!!
http://s966.photobucket.com/albums/a...=VIDEO0001.mp4

bigboybodry · 02-22-2011, 04:30 PM

here you go fellows let me know what you think
http://s966.photobucket.com/albums/a...t=IMG_0081.mp4

nxtruck · 02-22-2011, 09:55 PM

That thing sounds angry!! If it runs as good as it sounds, it'll fly!

nxtruck · 02-23-2011, 02:46 PM

Where do you run at? Ever run it at Memphis any?

bigboybodry · 02-24-2011, 01:10 AM

no just small tracks around here. I heard they shut down the memphis track?

nxtruck · 02-24-2011, 12:22 PM

Well, you heard right, but it has been sold and the new owners are going to run it under IHRA sanctioning this year!

bigsnookmaster · 02-24-2011, 07:01 PM

Truck sounds awesome! You're going to like the 4/7 swap, and your'e also going to like the Pro Systems carb! I would bet money on that!

djracer · 02-28-2011, 09:52 PM

Sounds sweet!

bigboybodry · 03-03-2011, 10:18 AM

Well I'm all moved into our new house so back to work on the truck this weekend! What style antiroll bar is everyone running I'm gessing I need a heavy duty one to help with all the weight?
Thanks everyone for the prompts!!!!!!
I cannot wait to get on the track and dance on those kits

djracer · 03-03-2011, 10:53 PM

Dont buy one that has the aluminum ends.

bigboybodry · 03-04-2011, 09:57 PM

Yeah my brother tried one like that on his transam and after a few races started having problems with the aluminum arm wearing causing the car to leave crazy. I was wondering if I needed the double arm that wolf offers or if the single would be fine? My truck is all steel with a unlimited fiberglass hood that I think is as heavy as the stock hood.
Posted via Mobile Device

djracer · 03-04-2011, 10:17 PM

I would buy a heavy duty one since our trucks are so heavy.

bigboybodry · 03-04-2011, 10:27 PM

Yeah that's what I was thinking too thanks man. Bye the way you made my week with that pass time pass that thing is flying be glad to see it back out kicking tail and taking names!!!!!!!
Posted via Mobile Device

shawnt · 03-04-2011, 10:39 PM

HRpartsnstuff ARB
Posted via Mobile Device

djracer · 03-05-2011, 07:10 PM

Quote:

Originally Posted by bigboybodry

Yeah that's what I was thinking too thanks man. Bye the way you made my week with that pass time pass that thing is flying be glad to see it back out kicking tail and taking names!!!!!!!
Posted via Mobile Device

Thanks Brodie

bigboybodry · 03-13-2011, 05:50 PM

The new carb. is in and on sounds sick!!!! I can't wait to run this thing.

Geoff · 03-16-2011, 05:01 AM

That thing looks pretty sweet....especially with all your nitrous lines, guess your not messing around..lol...

bigboybodry · 03-16-2011, 08:15 AM

Quote:

Originally Posted by Geoff

That thing looks pretty sweet....especially with all your nitrous lines, guess your not messing around..lol...

blow or go

02-05-2011, 11:12 PM	#26
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: new engine for my truck Man, that much nitrous on top of 500 + inches is NEVER the wrong thing to do! That thing ought to fly!!! I hope your tires and suspension are up to it. Let us know how it runs!! __________________ Chris 1966 Chevy C10 LWB, 434 sbc, TH350, 12-bolt, factory suspension, pump gas 7.02 @ 95.8, 1.45 60' 1965 Chevy C10 LWB, 355 sbc, TH350, daily driver

02-05-2011, 11:21 PM	#27
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: new engine for my truck 31/10.5w on a 16" wide wheel. Coil over shocks,moroso trick springs,reinforced trailing arms,and a anti-roll bar to be installed. I hope I can get it to the ground with all this Posted via Mobile Device __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

02-06-2011, 01:24 AM	#28
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: new engine for my truck this is off a friends phone the engine doesn't want to run with a 1379 cfm prosystems carb on it but i had to post it so you all could get a kick out of my good friend poke chop. http://s966.photobucket.com/albums/a...0203-17491.mp4 __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

02-09-2011, 10:19 PM	#30
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: new engine for my truck single qa1 on the front and strange single on the rear.I am going to c-notch the rear frame and install a good anti-roll. I would like to add a good set of tubular control arms on the front and do something with the rake of the truck(its setting about level). not trying to say anything bad about the fatman front end but I just don't like the look of the front wheels/tires setting that far under the truck. I have a long way to go but man it sure feels good to hear it run. __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

02-10-2011, 01:35 PM	#31
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: new engine for my truck Sounds good too!! Keep us up to date on your progress!! __________________ Chris 1966 Chevy C10 LWB, 434 sbc, TH350, 12-bolt, factory suspension, pump gas 7.02 @ 95.8, 1.45 60' 1965 Chevy C10 LWB, 355 sbc, TH350, daily driver

02-18-2011, 10:50 PM	#32
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: new engine for my truck well my new prosystems carb. will be here thursday __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

02-21-2011, 12:16 AM	#33
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: new engine for my truck Well guys I found the problem and it wasn't my carb. My crazy tell forgot I did a custom cam with a 4-7 swap when I ran the wires at 12:00 the night I fired it off for the first time I guess. I wish you all could hear this thing but all I have is my phone cam we lost our camcorder in the tornado. This thing sounds awsome!!!!! http://s966.photobucket.com/albums/a...=VIDEO0001.mp4 __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

02-22-2011, 04:30 PM	#34
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: new engine for my truck here you go fellows let me know what you think http://s966.photobucket.com/albums/a...t=IMG_0081.mp4 __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

02-22-2011, 09:55 PM	#35
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: new engine for my truck That thing sounds angry!! If it runs as good as it sounds, it'll fly! __________________ Chris 1966 Chevy C10 LWB, 434 sbc, TH350, 12-bolt, factory suspension, pump gas 7.02 @ 95.8, 1.45 60' 1965 Chevy C10 LWB, 355 sbc, TH350, daily driver

02-23-2011, 02:46 PM	#36
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: new engine for my truck Where do you run at? Ever run it at Memphis any? __________________ Chris 1966 Chevy C10 LWB, 434 sbc, TH350, 12-bolt, factory suspension, pump gas 7.02 @ 95.8, 1.45 60' 1965 Chevy C10 LWB, 355 sbc, TH350, daily driver

02-24-2011, 01:10 AM	#37
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: new engine for my truck no just small tracks around here. I heard they shut down the memphis track? __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

02-24-2011, 12:22 PM	#38
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: new engine for my truck Well, you heard right, but it has been sold and the new owners are going to run it under IHRA sanctioning this year! __________________ Chris 1966 Chevy C10 LWB, 434 sbc, TH350, 12-bolt, factory suspension, pump gas 7.02 @ 95.8, 1.45 60' 1965 Chevy C10 LWB, 355 sbc, TH350, daily driver

02-24-2011, 07:01 PM	#39
bigsnookmaster Registered User Join Date: Jan 2008 Location: St.Petersburg,Fl Posts: 1,267	Re: new engine for my truck Truck sounds awesome! You're going to like the 4/7 swap, and your'e also going to like the Pro Systems carb! I would bet money on that! __________________ greg http://community.webshots.com/user/68406Stepside

02-28-2011, 09:52 PM	#40
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: new engine for my truck Sounds sweet! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-03-2011, 10:18 AM	#41
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: new engine for my truck Well I'm all moved into our new house so back to work on the truck this weekend! What style antiroll bar is everyone running I'm gessing I need a heavy duty one to help with all the weight? Thanks everyone for the prompts!!!!!! I cannot wait to get on the track and dance on those kits __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ Last edited by bigboybodry; 03-03-2011 at 10:25 AM.



Register or Log In To remove these advertisements.

03-03-2011, 10:53 PM	#42
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: new engine for my truck Dont buy one that has the aluminum ends. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-04-2011, 09:57 PM	#43
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: new engine for my truck Yeah my brother tried one like that on his transam and after a few races started having problems with the aluminum arm wearing causing the car to leave crazy. I was wondering if I needed the double arm that wolf offers or if the single would be fine? My truck is all steel with a unlimited fiberglass hood that I think is as heavy as the stock hood. Posted via Mobile Device __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

03-04-2011, 10:17 PM	#44
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: new engine for my truck I would buy a heavy duty one since our trucks are so heavy. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-04-2011, 10:27 PM	#45
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: new engine for my truck Yeah that's what I was thinking too thanks man. Bye the way you made my week with that pass time pass that thing is flying be glad to see it back out kicking tail and taking names!!!!!!! Posted via Mobile Device __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

03-04-2011, 10:39 PM	#46
shawnt Registered User Join Date: Sep 2008 Location: sulphur springs texas Posts: 141	Re: new engine for my truck HRpartsnstuff ARB Posted via Mobile Device __________________ Shawn 85 SWB 7.39 @ 93 Best so far with 0 tuning Lesson in life: Never fry bacon naked!

03-13-2011, 05:50 PM	#48
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: new engine for my truck The new carb. is in and on sounds sick!!!! I can't wait to run this thing. Attached Images __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ

03-16-2011, 05:01 AM	#49
Geoff Geoff Join Date: Aug 2004 Location: Salem OR Posts: 70	Re: new engine for my truck That thing looks pretty sweet....especially with all your nitrous lines, guess your not messing around..lol... __________________ 68 SWB, 5/7 drop 406sbc. HR cam & dart iron eagles Th350 w/3000 stall H4 headlights and LED taillights

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.