The Custom Corner (60 to 66) - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jonzcustomshop · 06-11-2010, 09:56 AM

I really ike it in this shot...

*lakeroadster* · 06-11-2010, 10:30 AM

Front sheet metal will be ????

jason65 · 06-11-2010, 10:34 AM

That thing is wild. I would roll in it.

IronCustoms · 06-11-2010, 01:39 PM

The body is in black hot rod primer, We put them all in primer till it has a buyer, then the customer can decide colors, As for the doghouse...We like the open roadster look with a custom grill shell, gives it more of a vintage look, We do have a design that incorporates the factory hood and grill shell(chopped and sectioned) But there again..We leave it up to the customer as to what they prefer. Thanks again for all the great feedback. It helps keep us on our toes. Jim Hall

JimmyFloyd · 06-11-2010, 01:46 PM

I like it, but.... How do you get in?

64c20crewcab · 06-11-2010, 02:24 PM

WOW is an understatement! "ONE OF A KIND, NOT ONE OF THE CROWD" - I LIKE IT!

blackmopar · 06-12-2010, 02:23 PM

man i like the idea, but i dont get why you narrowed it, the open wheel/rear fender lips dont look right to me - shoulda kept it wide and tucked the wheels IMO - but the use of the back cab panel was a great idea taking it all the way back. But should roll panned the bottom if your not gonna run a bumper.

Leaving the front open is a bad idea - there is nothing 'vintage' or roadster looking about it - the front rails/suspension/steering box all scream 'put fenders and a grill on me please!!'

certainly creative, and nice fab skils though!

blackmopar · 06-12-2010, 02:34 PM

sorta reminds me of this unfinished - but notice frame rails and suspension on this even needed fender/hood to work

andyspinstriping · 06-13-2010, 08:45 PM

This is my favorite Frankenstien truck ever!

ratty 46 · 06-13-2010, 09:51 PM

Didn't I see the black IC truck on Evil-bay??

Ratty 46

IronCustoms · 06-14-2010, 04:52 PM

To ratty 46, yes, it is there for 3 more days.

To Blackmopar: Your comments were noted. All criticism (good or bad) just helps us work harder. We are all a work in progress including what we do. Thanks for the input though.

IronCustoms · 06-14-2010, 05:03 PM

I want to thank everyone on here for their words of encouragement, compliments, etc. We strive to build things that are outside the box so to speak. We know there not perfect, nor are they complete as much as we want them to be. We build on a budget and that usually dictates how far we can go. But I know its better to try and see how far we can go than to not try at all. Thanks again, We`ll keep you posted on the next build.

Dinos63 · 06-14-2010, 05:42 PM

WOW DUUUDE YOU GOT SKILLS , NICE I LIKE IT!

McC_65_91 · 06-14-2010, 09:24 PM

very cool and good work, very unique... i like it

IronCustoms · 06-16-2010, 06:56 PM

Thanks guys, Hopefully it will find a new home by the weekend, so we can start another one, I think it will be a C-10 AMINO. I think you guys will figure that one out.

Demmit_Hemmit's 65 · 06-16-2010, 07:05 PM

Hey Jim............................Very cool build there buddy...............hope it sells for ya. I have to get up there to see ya sometime..................Helmut............................AKA..Hemmit

IronCustoms · 06-17-2010, 10:19 PM

Helmut..How`s it going? Looks like I`ll have the beast another week or so. It did`nt turn at auction, got up to $7600 though, not too awfully bad. Come up sometime. Take care Dude

06-11-2010, 09:56 AM	#26
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: The Custom Corner (60 to 66) I really ike it in this shot... Attached Images __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

06-11-2010, 10:30 AM	#27
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: The Custom Corner (60 to 66) Front sheet metal will be ????

06-11-2010, 10:34 AM	#28
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: The Custom Corner (60 to 66) That thing is wild. I would roll in it.

06-11-2010, 01:39 PM	#29
IronCustoms Registered User Join Date: Apr 2010 Location: Urbana, Indiana Posts: 23	Re: The Custom Corner (60 to 66) The body is in black hot rod primer, We put them all in primer till it has a buyer, then the customer can decide colors, As for the doghouse...We like the open roadster look with a custom grill shell, gives it more of a vintage look, We do have a design that incorporates the factory hood and grill shell(chopped and sectioned) But there again..We leave it up to the customer as to what they prefer. Thanks again for all the great feedback. It helps keep us on our toes. Jim Hall

06-11-2010, 01:46 PM	#30
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: The Custom Corner (60 to 66) I like it, but.... How do you get in? __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

06-11-2010, 02:24 PM	#31
64c20crewcab Registered User Join Date: Jun 2008 Location: North SD County Posts: 631	Re: The Custom Corner (60 to 66) WOW is an understatement! "ONE OF A KIND, NOT ONE OF THE CROWD" - I LIKE IT! __________________ ..............................._________ ......___________//___[[___{\ _____ ...../__(_(O)_)___/____/____/_(O)_/ 1964 C20 Long Stepside 3 Door Crew Cab - Armbruster-Stageway Conversion Y2K INDN Chief "ONE OF A KIND, NOT ONE OF THE CROWD" Aug 2010 - Front end frame cleanup & engine swap done!!! June 2011 - Rear end bagged Sept 2011 - Rebuild motor top end Sept 2012 - Parked and slowly working on it. Aug 2013 - Front end bagged - finally! Aug 2014 - Stepside swap conversion done. Finally ready to start bodywork! Have a few KEWL ideas... Here is my build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=335427

06-12-2010, 02:23 PM	#32
blackmopar Registered User Join Date: Jul 2009 Location: fallbrook, ca Posts: 326	Re: The Custom Corner (60 to 66) man i like the idea, but i dont get why you narrowed it, the open wheel/rear fender lips dont look right to me - shoulda kept it wide and tucked the wheels IMO - but the use of the back cab panel was a great idea taking it all the way back. But should roll panned the bottom if your not gonna run a bumper. Leaving the front open is a bad idea - there is nothing 'vintage' or roadster looking about it - the front rails/suspension/steering box all scream 'put fenders and a grill on me please!!' certainly creative, and nice fab skils though!

06-12-2010, 02:34 PM	#33
blackmopar Registered User Join Date: Jul 2009 Location: fallbrook, ca Posts: 326	Re: The Custom Corner (60 to 66) sorta reminds me of this unfinished - but notice frame rails and suspension on this even needed fender/hood to work Last edited by blackmopar; 06-12-2010 at 02:34 PM.

06-13-2010, 08:45 PM	#34
andyspinstriping Registered User Join Date: Sep 2009 Location: American Fork Utah Posts: 119	Re: The Custom Corner (60 to 66) This is my favorite Frankenstien truck ever!

06-13-2010, 09:51 PM	#35
ratty 46 Registered User Join Date: Jun 2009 Location: Atlanta, Ga. Posts: 1,104	Re: The Custom Corner (60 to 66) Didn't I see the black IC truck on Evil-bay?? Ratty 46

06-14-2010, 04:52 PM	#36
IronCustoms Registered User Join Date: Apr 2010 Location: Urbana, Indiana Posts: 23	Re: The Custom Corner (60 to 66) To ratty 46, yes, it is there for 3 more days. To Blackmopar: Your comments were noted. All criticism (good or bad) just helps us work harder. We are all a work in progress including what we do. Thanks for the input though.

06-14-2010, 05:03 PM	#37
IronCustoms Registered User Join Date: Apr 2010 Location: Urbana, Indiana Posts: 23	Re: The Custom Corner (60 to 66) I want to thank everyone on here for their words of encouragement, compliments, etc. We strive to build things that are outside the box so to speak. We know there not perfect, nor are they complete as much as we want them to be. We build on a budget and that usually dictates how far we can go. But I know its better to try and see how far we can go than to not try at all. Thanks again, We`ll keep you posted on the next build.

06-14-2010, 05:42 PM	#38
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: The Custom Corner (60 to 66) WOW DUUUDE YOU GOT SKILLS , NICE I LIKE IT! __________________ CHEVY ONLY... Nothin Else !

06-14-2010, 09:24 PM	#39
McC_65_91 Registered User Join Date: Apr 2010 Location: East Quogue, NY Posts: 198	Re: The Custom Corner (60 to 66) very cool and good work, very unique... i like it

06-16-2010, 06:56 PM	#40
IronCustoms Registered User Join Date: Apr 2010 Location: Urbana, Indiana Posts: 23	Re: The Custom Corner (60 to 66) Thanks guys, Hopefully it will find a new home by the weekend, so we can start another one, I think it will be a C-10 AMINO. I think you guys will figure that one out.



Register or Log In To remove these advertisements.

06-16-2010, 07:05 PM	#41
Demmit_Hemmit's 65 Senior Member Join Date: Mar 2002 Location: Peru, Indiana Posts: 741	Re: The Custom Corner (60 to 66) Hey Jim............................Very cool build there buddy...............hope it sells for ya. I have to get up there to see ya sometime..................Helmut............................AKA..Hemmit

06-17-2010, 10:19 PM	#42
IronCustoms Registered User Join Date: Apr 2010 Location: Urbana, Indiana Posts: 23	Re: The Custom Corner (60 to 66) Helmut..How`s it going? Looks like I`ll have the beast another week or so. It did`nt turn at auction, got up to $7600 though, not too awfully bad. Come up sometime. Take care Dude

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.