New project @ Street Machinery 1966 C10 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jmedero · 01-29-2011, 12:27 AM

im in. Good to see you building another one.

wutnxt · 01-29-2011, 02:44 PM

I completely dig that frame/chassis.....
Thats awsome

Dirty Doug · 02-01-2011, 08:13 AM

I can't believe your going to paint this with all the natural patina it his. Are you really gonna spend the time and money doing this? It looked like it was going to be such a quick project for you with the chassis already done. Oh what the f*%k , you have other shooters to drive.

aggie91 · 02-09-2011, 01:06 PM

I wondered where that chassis went after I saw it for sale.

I will have to watch out for this one.

Delmo · 02-09-2011, 02:18 PM

Nice work Boris.

jchav62 · 02-09-2011, 04:27 PM

Cool project!

I've kicked around the BBW conversion idea in the past, but never grew the nerve to go through with it. I can't wait to see the results...

Mad Rods · 02-09-2011, 04:28 PM

Gonna be sick!!!!
Posted via Mobile Device

kart34 · 02-09-2011, 07:53 PM

Way2lo2 post up some pics?????????

**way2lo2** · 02-09-2011, 09:09 PM

Quote:

Originally Posted by kart34

Way2lo2 post up some pics?????????

Sorry Greg, the snow has kept me from cutting the inner big window panel out of the parts truck but yesterday I could wait no longer. I put my big boy panties on, warm boots, a few extension cords, and some sharp sawzall blades and the booger came out.

**way2lo2** · 02-09-2011, 09:32 PM

Had to grind down about a hundred spot welds, in just the opposite fashion of removing the small window panel from my truck.

**way2lo2** · 02-09-2011, 09:36 PM

Here is whats left, soon to be a picture frame for the wall.

franky69c10 · 02-10-2011, 01:59 AM

Lookn good
Posted via Mobile Device

**way2lo2** · 02-11-2011, 07:28 PM

off to the blasters to get rid of that surface rust y'all like so much, hope to have it back next week so I can hit it hard.

**Clyde65** · 02-11-2011, 07:40 PM

Man, if I was only close, I would have you do the BBW conversion. I already have one located that is out.....Maybe Ill drive my truck up there this summer and ...oh nut's, yall know I wont do that.

SCOTI · 02-12-2011, 12:30 AM

Quote:

Originally Posted by Clyde65

Man, if I was only close, I would have you do the BBW conversion. I already have one located that is out.....Maybe Ill drive my truck up there this summer and ...oh nut's, yall know I wont do that.

PM sent.

Fabian · 02-12-2011, 04:50 AM

Fantastic project Boris!

crawdadfox · 02-12-2011, 10:48 AM

What no patina?!! Thats a killer rolling chassis, what kind of wheels....big smoothies with dog dish caps?

Oh yeah how many million miles does the ol' Tow Pig have on it now.....

**Clyde65** · 02-12-2011, 11:21 AM

Boris, have you thought about putting in a high mount brake light while you have the rear sheetmetal out? just a thought.

**way2lo2** · 02-18-2011, 11:54 AM

Quote:

Originally Posted by Fabian

Fantastic project Boris!

Thanks Fabian, have you considered building one of these? Hahahaha

**way2lo2** · 02-18-2011, 11:56 AM

Quote:

Originally Posted by Clyde65

Boris, have you thought about putting in a high mount brake light while you have the rear sheetmetal out? just a thought.

Probably a great idea as far as safety is concerned, but the 3rd light is just not for me.

**way2lo2** · 02-18-2011, 12:01 PM

Cab should be done at the blasters today, hoping I can pick it up before the weather gets bad again. Hard to believe its over 60 degrees in Cleveland during Feb. Inner fenders mock-up.

AllenKarber · 02-18-2011, 12:10 PM

That is going to be awesome! Great work man!

65sublime · 02-18-2011, 01:23 PM

Do you have plans to fill in the side (vertical) areas of the new inner fender or are you going to keep peep holes? ....could be interesting left open. How close are the hood sides? Nice beadwork!

**way2lo2** · 02-18-2011, 01:58 PM

Quote:

Originally Posted by 65sublime

Do you have plans to fill in the side (vertical) areas of the new inner fender or are you going to keep peep holes? ....could be interesting left open. How close are the hood sides? Nice beadwork!

yes the complete inner panel will be closed off and removable as well.. The hood hasn't been fit yet but there will be enough clearance between the top of the tub and the the hood.

61_FL_Apache · 02-18-2011, 02:33 PM

Subscribed.. Nice work!!

01-29-2011, 12:27 AM	#26
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: New project @ Street Machinery 1966 C10 im in. Good to see you building another one. __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084 Last edited by jmedero; 01-29-2011 at 12:29 AM. Reason: removed stupid question... lol

01-29-2011, 02:44 PM	#27
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: New project @ Street Machinery 1966 C10 I completely dig that frame/chassis..... Thats awsome

02-01-2011, 08:13 AM	#28
Dirty Doug Registered User Join Date: Oct 2010 Location: Twin Cities, Mn. Posts: 114	Re: New project @ Street Machinery 1966 C10 I can't believe your going to paint this with all the natural patina it his. Are you really gonna spend the time and money doing this? It looked like it was going to be such a quick project for you with the chassis already done. Oh what the f*%k , you have other shooters to drive.

02-09-2011, 01:06 PM	#29
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: New project @ Street Machinery 1966 C10 I wondered where that chassis went after I saw it for sale. I will have to watch out for this one. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

02-09-2011, 02:18 PM	#30
Delmo Registered User Join Date: Feb 2003 Location: Burbank CA Posts: 1,226	Re: New project @ Street Machinery 1966 C10 Nice work Boris.

02-09-2011, 04:27 PM	#31
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: New project @ Street Machinery 1966 C10 Cool project! I've kicked around the BBW conversion idea in the past, but never grew the nerve to go through with it. I can't wait to see the results... __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

02-09-2011, 04:28 PM	#32
Mad Rods Chevy Only Tx Join Date: May 2009 Location: Pecos,Tx Posts: 1,061	Re: New project @ Street Machinery 1966 C10 Gonna be sick!!!! Posted via Mobile Device __________________ Chevy Only Tx.........

02-09-2011, 07:53 PM	#33
kart34 Registered User Join Date: Jul 2009 Location: Blooming Prairie, Minnesota Posts: 673	Re: New project @ Street Machinery 1966 C10 Way2lo2 post up some pics?????????

02-09-2011, 09:32 PM	#35
way2lo2 way2lo2 Join Date: Sep 2004 Location: Cleveland , Ohio Posts: 803	Re: New project @ Street Machinery 1966 C10 Had to grind down about a hundred spot welds, in just the opposite fashion of removing the small window panel from my truck. Attached Images __________________ Dealer for Billet Specialties, Ridetech, Airlift, Vintage Air and others. Feel free to call, email, or PM for a quote. 216 481-5219 office 216 481-4240 fax 216 789-1647 mobile Way2Lo2@aol.com <----also my paypal http://www.hubgarage.com/mygarage/way2Lo2

02-09-2011, 09:36 PM	#36
way2lo2 way2lo2 Join Date: Sep 2004 Location: Cleveland , Ohio Posts: 803	Re: New project @ Street Machinery 1966 C10 Here is whats left, soon to be a picture frame for the wall. Attached Images __________________ Dealer for Billet Specialties, Ridetech, Airlift, Vintage Air and others. Feel free to call, email, or PM for a quote. 216 481-5219 office 216 481-4240 fax 216 789-1647 mobile Way2Lo2@aol.com <----also my paypal http://www.hubgarage.com/mygarage/way2Lo2

02-10-2011, 01:59 AM	#37
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: New project @ Street Machinery 1966 C10 Lookn good Posted via Mobile Device __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

02-11-2011, 07:28 PM	#38
way2lo2 way2lo2 Join Date: Sep 2004 Location: Cleveland , Ohio Posts: 803	Re: New project @ Street Machinery 1966 C10 off to the blasters to get rid of that surface rust y'all like so much, hope to have it back next week so I can hit it hard. Attached Images __________________ Dealer for Billet Specialties, Ridetech, Airlift, Vintage Air and others. Feel free to call, email, or PM for a quote. 216 481-5219 office 216 481-4240 fax 216 789-1647 mobile Way2Lo2@aol.com <----also my paypal http://www.hubgarage.com/mygarage/way2Lo2

02-11-2011, 07:40 PM	#39
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: New project @ Street Machinery 1966 C10 Man, if I was only close, I would have you do the BBW conversion. I already have one located that is out.....Maybe Ill drive my truck up there this summer and ...oh nut's, yall know I wont do that. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

02-12-2011, 04:50 AM	#41
Fabian Registered User Join Date: Feb 2011 Location: Germany Posts: 381	Re: New project @ Street Machinery 1966 C10 Fantastic project Boris!

02-12-2011, 10:48 AM	#42
crawdadfox Registered User Join Date: Aug 2008 Location: New Orleans Louisiana.....a great place to visit but you wouldn't want to live here!!! Posts: 883	Re: New project @ Street Machinery 1966 C10 What no patina?!! Thats a killer rolling chassis, what kind of wheels....big smoothies with dog dish caps? Oh yeah how many million miles does the ol' Tow Pig have on it now..... __________________ Down......with the sickness!! Last edited by crawdadfox; 02-12-2011 at 10:51 AM. Reason: BL-12oz.



Register or Log In To remove these advertisements.

02-12-2011, 11:21 AM	#43
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: New project @ Street Machinery 1966 C10 Boris, have you thought about putting in a high mount brake light while you have the rear sheetmetal out? just a thought. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

02-18-2011, 12:01 PM	#46
way2lo2 way2lo2 Join Date: Sep 2004 Location: Cleveland , Ohio Posts: 803	Re: New project @ Street Machinery 1966 C10 Cab should be done at the blasters today, hoping I can pick it up before the weather gets bad again. Hard to believe its over 60 degrees in Cleveland during Feb. Inner fenders mock-up. Attached Images __________________ Dealer for Billet Specialties, Ridetech, Airlift, Vintage Air and others. Feel free to call, email, or PM for a quote. 216 481-5219 office 216 481-4240 fax 216 789-1647 mobile Way2Lo2@aol.com <----also my paypal http://www.hubgarage.com/mygarage/way2Lo2

02-18-2011, 12:10 PM	#47
AllenKarber Registered User Join Date: Apr 2008 Location: Arkadelphia,Arkansas Posts: 199	Re: New project @ Street Machinery 1966 C10 That is going to be awesome! Great work man!

02-18-2011, 01:23 PM	#48
65sublime Registered User Join Date: Feb 2007 Location: Pendleton, NY Posts: 64	Re: New project @ Street Machinery 1966 C10 Do you have plans to fill in the side (vertical) areas of the new inner fender or are you going to keep peep holes? ....could be interesting left open. How close are the hood sides? Nice beadwork!

02-18-2011, 02:33 PM	#50
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: New project @ Street Machinery 1966 C10 Subscribed.. Nice work!! __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.