CA Parting 67 C10 Suburban - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jays68yak · 08-24-2011, 10:59 AM

Quote:

Originally Posted by cojnit

Rear passenger side cab corner? includes dark area, shown in the picture

cojnit · 08-24-2011, 03:19 PM

actually all of it

as much of that corner that is in decent shape... mine got tagged by a driver in the parking lot...

jays68yak · 08-24-2011, 03:38 PM

Want to send me a picture of how bad it is so I can getting a better idea of what you might need.

jays68yak · 08-25-2011, 12:53 AM

Quote:

Originally Posted by cojnit

actually all of it

as much of that corner that is in decent shape... mine got tagged by a driver in the parking lot...

Well I got excited to play with the sawzall.

Went down from the window, not really straight but should be enough for you to mend yours. $30 plus the ride

jays68yak · 08-25-2011, 12:56 AM

Quote:

Originally Posted by camrycurt

I think I was editing my post at the same time you were replying. I also need the brackets and all of the mounting hardware (including the 4 chrome bolts to mount the bumper) for the bumper.

Condition isn't really critical. My truck is a rusty work in progress so I'm not too picky.

Sorry for the confusion over editing my post.

Let me know what you find.

Thanks!

This all that you were looking for?

Some PO drilled 2 holes to tie into the hitch, the plate covers it.
$35 shipped.

athleo · 08-25-2011, 04:17 AM

Do you still have the mirrors? What condition are they in? How much shipped to 78552? Thanks...dwt.

curly joe · 08-25-2011, 06:38 AM

looking for patch panels in front of rear wheels,shipped to 48178

camrycurt · 08-25-2011, 08:06 AM

Quote:

Originally Posted by jays68yak

This all that you were looking for? Some PO drilled 2 holes to tie into the hitch, the plate covers it.
$35 shipped.

Yes, that's all of it. Is the pigtail still connected to the light?

I'll take it all for $35 shipped. Let me know how you want payment and I'll take care of that today.

Thanks!

jays68yak · 08-25-2011, 10:47 AM

Quote:

Originally Posted by athleo

Do you still have the mirrors? What condition are they in? How much shipped to 78552? Thanks...dwt.

I do but they are no longer mirrors, the glass is gone and the rest is pretty rusting looking.

Quote:

Originally Posted by curly joe

looking for patch panels in front of rear wheels,shipped to 48178

Can you give me an idea of the size your looking for and area you want covered? Ive already got the pass side quarter cut off.

curly joe · 08-25-2011, 08:14 PM

on the driver side about 14 inches high and about 15 inches from the wheel well, thanks curly

6772king · 08-25-2011, 09:09 PM

how much for the mirror arms and a 8x8 square patch around the gas filler neck,, i just need the outer skin not the inner piece

jays68yak · 08-25-2011, 11:35 PM

Quote:

Originally Posted by curly joe

on the driver side about 14 inches high and about 15 inches from the wheel well, thanks curly

Does this look right? I know its hard to see the black lines.
http://pnkages.com/gallery/d/9805-2/IMAG0955.jpg

Quote:

Originally Posted by 6772king

how much for the mirror arms and a 8x8 square patch around the gas filler neck,, i just need the outer skin not the inner piece

NM went and looked at that area on the quarter, its got a good 1/4 inch of bondo and rust on it.

cojnit · 08-26-2011, 02:52 AM

Paypal?

curly joe · 08-26-2011, 06:42 AM

wrong pic on the link, but if its 14 high by15 long it will work, thanks curly

jays68yak · 08-26-2011, 09:41 AM

Quote:

Originally Posted by curly joe

wrong pic on the link, but if its 14 high by15 long it will work, thanks curly

http://pnkages.com/gallery/d/9810-1/IMAG0961.jpg

Your after the part that says keep, or the other part?

curly joe · 08-26-2011, 04:28 PM

other

curly joe · 08-26-2011, 04:29 PM

same one on the other side if you still have it

curly joe · 08-26-2011, 04:34 PM

gone until sunday, will talk to you then, curly

polock07 · 08-26-2011, 06:17 PM

Quote:

Originally Posted by jays68yak

This guy?

$16 to your door.

On another note, its getting pretty gutted. So if you looking for patch panels better speak up. I might be scraping the body this weekend.

do you have the front one sorry about that, so front passenger side door strike plate?

Mt Man Chad · 08-26-2011, 07:31 PM

Is the driver side tailgate area clean for a patch panel?
Air cleaner still for sale?

jays68yak · 08-27-2011, 12:23 PM

Quote:

Originally Posted by curly joe

other

Quote:

Originally Posted by curly joe

same one on the other side if you still have it

Quote:

Originally Posted by curly joe

gone until sunday, will talk to you then, curly

Now Im really confused.

Quote:

Originally Posted by polock07

do you have the front one sorry about that, so front passenger side door strike plate?

I have all 3. So yeah.

Quote:

Originally Posted by Mt Man Chad

Is the driver side tailgate area clean for a patch panel?
Air cleaner still for sale?

Do you mean on the pillar side of the body, or the tailgate itself? Im not cutting the tailgate up. I already cut the body up, but the pillar was in decent shape. What part are you looking for?

Mt Man Chad · 08-28-2011, 10:34 AM

Sorry about that, my bad.
Looking for drivers tail light section and area below the gas cap on passenger side from tail lights to wheel well.

#23 driver side in picture
#24 passenger side in picture
Also looking for section of firewall between heater core and blower motor.

Is the original air cleaner housing still for sale.

Thanks
Chad

curly joe · 08-28-2011, 12:09 PM

back home, i'am after the part next to the one that says keep in the pic. on each side of the truck, thanks curly

jays68yak · 08-29-2011, 01:12 AM

Quote:

Originally Posted by Mt Man Chad

Sorry about that, my bad.
Looking for drivers tail light section and area below the gas cap on passenger side from tail lights to wheel well.

#23 driver side in picture
#24 passenger side in picture
Also looking for section of firewall between heater core and blower motor.

Is the original air cleaner housing still for sale.

Thanks
Chad

Both patch panels where not worth the effort for either of us. The drivers side tail light part had been hit, the pass side lower had rot at the wheel end and I had cut the other end for the other patch.

single barrel air cleaner is still for sale.

Quote:

Originally Posted by curly joe

back home, i'am after the part next to the one that says keep in the pic. on each side of the truck, thanks curly

I was only able to salvage the drivers side patch.

curly joe · 08-29-2011, 05:49 AM

how much for drivers side shipped to 48718, thanks curly

08-24-2011, 03:19 PM	#27
cojnit Nothing clever Join Date: Jun 2003 Location: Kailua HI Posts: 828	Re: Parting 67 C10 Suburban actually all of it as much of that corner that is in decent shape... mine got tagged by a driver in the parking lot... __________________ Got "the Midas Touch!"

08-24-2011, 03:38 PM	#28
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,453	Re: Parting 67 C10 Suburban Want to send me a picture of how bad it is so I can getting a better idea of what you might need. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

08-25-2011, 04:17 AM	#31
athleo Registered User Join Date: Jul 2011 Location: Harlingen, Texas Posts: 145	Re: Parting 67 C10 Suburban Do you still have the mirrors? What condition are they in? How much shipped to 78552? Thanks...dwt.

08-25-2011, 06:38 AM	#32
curly joe Registered User Join Date: Jan 2009 Location: so.lyon, michigan Posts: 17	Re: Parting 67 C10 Suburban looking for patch panels in front of rear wheels,shipped to 48178

08-25-2011, 08:14 PM	#35
curly joe Registered User Join Date: Jan 2009 Location: so.lyon, michigan Posts: 17	Re: Parting 67 C10 Suburban on the driver side about 14 inches high and about 15 inches from the wheel well, thanks curly

08-25-2011, 09:09 PM	#36
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	Re: Parting 67 C10 Suburban how much for the mirror arms and a 8x8 square patch around the gas filler neck,, i just need the outer skin not the inner piece __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

08-26-2011, 02:52 AM	#38
cojnit Nothing clever Join Date: Jun 2003 Location: Kailua HI Posts: 828	Re: Parting 67 C10 Suburban Paypal? __________________ Got "the Midas Touch!"

08-26-2011, 06:42 AM	#39
curly joe Registered User Join Date: Jan 2009 Location: so.lyon, michigan Posts: 17	Re: Parting 67 C10 Suburban wrong pic on the link, but if its 14 high by15 long it will work, thanks curly

08-26-2011, 04:28 PM	#41
curly joe Registered User Join Date: Jan 2009 Location: so.lyon, michigan Posts: 17	Re: Parting 67 C10 Suburban other

08-26-2011, 04:29 PM	#42
curly joe Registered User Join Date: Jan 2009 Location: so.lyon, michigan Posts: 17	Re: Parting 67 C10 Suburban same one on the other side if you still have it

08-26-2011, 04:34 PM	#43
curly joe Registered User Join Date: Jan 2009 Location: so.lyon, michigan Posts: 17	Re: Parting 67 C10 Suburban gone until sunday, will talk to you then, curly

08-26-2011, 07:31 PM	#45
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: Parting 67 C10 Suburban Is the driver side tailgate area clean for a patch panel? Air cleaner still for sale? __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

08-28-2011, 10:34 AM	#47
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: Parting 67 C10 Suburban Sorry about that, my bad. Looking for drivers tail light section and area below the gas cap on passenger side from tail lights to wheel well. #23 driver side in picture #24 passenger side in picture Also looking for section of firewall between heater core and blower motor. Is the original air cleaner housing still for sale. Thanks Chad Attached Images __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread Last edited by Mt Man Chad; 08-28-2011 at 02:40 PM.

08-28-2011, 12:09 PM	#48
curly joe Registered User Join Date: Jan 2009 Location: so.lyon, michigan Posts: 17	Re: Parting 67 C10 Suburban back home, i'am after the part next to the one that says keep in the pic. on each side of the truck, thanks curly

08-29-2011, 05:49 AM	#50
curly joe Registered User Join Date: Jan 2009 Location: so.lyon, michigan Posts: 17	Re: Parting 67 C10 Suburban how much for drivers side shipped to 48718, thanks curly



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.