Burnouts and Idles! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cjohnson6772 · 06-23-2013, 12:33 AM

Quote:

Originally Posted by 68Stepbed

Shorty headers, 2.5" pipes with x-pipe, Magnaflow mufflers. The pipes were bent at a muffler shop in knoxville, so they're not mandrel bent. I eventually want to build a mandrel bent system with Borla XR-1 mufflers.

What magnaflows are those? How would you rate the volume? Drone?

68Stepbed · 06-24-2013, 08:23 AM

Quote:

Originally Posted by cjohnson6772

What magnaflows are those? How would you rate the volume? Drone?

I'm really not sure which mufflers these are. I told the exhaust shop to put them on. I never bothered looking at part numbers. If it's important to know, I could call the exhaust shop sometime and find out what they install.

As for volume, well, to me, they're not quite loud enough. At idle it's almost too subdued. I've heard other Magnaflow equipped vehicles that don't sound this quiet, so I'm thinking it may be the non-mandrel bent pipes changing the tone. I have a buddy that can tig weld, so I'm thinking of sometime down the road getting a madrel bent pipe kit, and building a new system and even adding cut-outs. I'll have my buddy tig weld all the joints so we can grind and smooth them all down, then have the system coated.

As for drone, it's not bad at all. These trucks are really never quiet, so along with all the other noises, the drone is not very noticeable. However, there is a heavy drone at certain speeds, but it's not at speeds where I spend the most time, so it's not constant.

Sicklajoie · 06-24-2013, 05:20 PM

My next door neighbor leaving his mark exiting a car show.

Grasshoppa on 140 - YouTube

Rusty69 · 07-26-2013, 10:57 PM

Quote:

Originally Posted by 68Stepbed

I'm really not sure which mufflers these are. I told the exhaust shop to put them on. I never bothered looking at part numbers.

What is your engine set up(cam, heads, etc)?
Posted via Mobile Device

**RRR18** · 04-22-2013, 11:57 AM

Quickie....I'll work on the burnout video in coming weeks!

67 C10 - YouTube

*Mister-B* · 04-22-2013, 10:28 PM

Quote:

Originally Posted by RRR18

Quickie....I'll work on the burnout video in coming weeks!67 C10 - YouTube

By the way, how do you guys embed a video like that so it plays right from here, instead of it being a link?
Posted via Mobile Device

BugzC10 · 05-07-2013, 06:50 AM

Quote:

Originally Posted by RRR18

Quickie....I'll work on the burnout video in coming weeks!67 C10 - YouTube

Sounds sweet and a nice advertisement for JEGS

Posted via Mobile Device

**bigmac73** · 08-25-2013, 07:22 AM

Quote:

Originally Posted by RRR18

Quickie....I'll work on the burnout video in coming weeks!67 C10 - YouTube

Show me that gage board again and more of the interior looked pretty sweet, but moved the camera around to fast

*Mister-B* · 04-22-2013, 10:26 PM

Here's mine. Just installed a tac today

http://youtu.be/C_MP_j_9AKk
Posted via Mobile Device

srea76 · 05-07-2013, 12:17 AM

Click the Share link under the video.
Click the Embed link.
Copy the code provided in the expanded box.
Paste the code into your blog or website.

**RRR18** · 05-07-2013, 01:02 PM

Ya....whoops. Think there was a Summit cover on the other fender!
Posted via Mobile Device

ZombieWeinerDog · 05-10-2013, 11:11 PM

http://www.youtube.com/watch?v=0v-JuytAYsk

wreckedchevy · 07-03-2013, 02:45 AM

http://youtu.be/qogH98VQCl4

ole dollor · 07-03-2013, 06:47 PM

Quote:

Originally Posted by wreckedchevy

http://youtu.be/qogH98VQCl4

the only thing that can idle slower than that is a harley... sounds good

jus2qwk · 07-03-2013, 01:10 PM

just a baby cam. when the new motor was just finished.

http://youtu.be/Z3iAbX2_f7o

couldnt figure out how to get the video to come up on this page

BugzC10 · 07-03-2013, 01:59 PM

Quote:

Originally Posted by jus2qwk

just a baby cam. when the new motor was just finished.

http://youtu.be/Z3iAbX2_f7o

couldnt figure out how to get the video to come up on this page

Music to my ears....what headers, size pipes and mufflers are running?
Posted via Mobile Device

68Stepbed · 07-08-2013, 09:06 AM

Not necessarily a burnout, but there's some tire spinning action.

BugzC10 · 07-08-2013, 12:34 PM

Quote:

Originally Posted by 68Stepbed

Not necessarily a burnout, but there's some tire spinning action.

Couldn't see anything....might be my iPad.
Posted via Mobile Device

68Stepbed · 07-08-2013, 06:43 PM

Try this YouTube link.

68 C10 Nashville GoodGuys autocross 2013 - YouTube

BugzC10 · 07-08-2013, 07:21 PM

Sounds sweeet Matt!

I Still want those 17s?...

Posted via Mobile Device

weaintscared · 07-26-2013, 09:46 PM

First time backing it out the shop,, just had to get a feel of it..

http://m.youtube.com/watch?feature=s...eature%3Dshare
Posted via Mobile Device

Bennett68C10 · 07-26-2013, 10:09 PM

Quote:

Originally Posted by weaintscared

First time backing it out the shop,, just had to get a feel of it..

http://m.youtube.com/watch?feature=s...eature%3Dshare
Posted via Mobile Device

Sweet

Posted via Mobile Device

weaintscared · 07-26-2013, 11:11 PM

Quote:

Originally Posted by Bennett68C10

Sweet

Posted via Mobile Device

Love that WoW factor
Posted via Mobile Device

04-22-2013, 10:26 PM	#9
Mister-B Account Suspended Join Date: Oct 2012 Location: Salt Lake City, Utah Posts: 3,332	Re: Burnouts and Idles! Here's mine. Just installed a tac today http://youtu.be/C_MP_j_9AKk Posted via Mobile Device

05-07-2013, 12:17 AM	#10
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: Burnouts and Idles! Click the Share link under the video. Click the Embed link. Copy the code provided in the expanded box. Paste the code into your blog or website. __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project

05-07-2013, 01:02 PM	#11
RRR18 Senior Member Join Date: Nov 2010 Location: Lordstown, OH / Wentzville, MO Posts: 870	Re: Burnouts and Idles! Ya....whoops. Think there was a Summit cover on the other fender! Posted via Mobile Device __________________ '67 BAD IDEA Follow on Instagram https://www.instagram.com/rtimes3c10/ Ryan

07-03-2013, 02:45 AM	#13
wreckedchevy Registered User Join Date: Jun 2013 Location: billings, mt Posts: 703	Re: Burnouts and Idles! http://youtu.be/qogH98VQCl4 __________________ 1969 Chevy C10 2wd stepside longbox

07-03-2013, 01:10 PM	#15
jus2qwk Registered User Join Date: Mar 2011 Location: Wytheville, Virginia Posts: 591	Re: Burnouts and Idles! just a baby cam. when the new motor was just finished. http://youtu.be/Z3iAbX2_f7o couldnt figure out how to get the video to come up on this page __________________ Corey Jones Designs CoreyJonesDesigns on instagram Ole Silver- 1967 stepside http://www.hotrod.com/articles/1103c...chevrolet-c10/ http://67-72chevytrucks.com/vboard/s...d.php?t=598758

07-08-2013, 09:06 AM	#17
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: Burnouts and Idles! Not necessarily a burnout, but there's some tire spinning action. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

07-08-2013, 07:21 PM	#20
BugzC10 Registered User Join Date: Oct 2012 Location: Rose Hill Kansas Posts: 1,351	Re: Burnouts and Idles! Sounds sweeet Matt! I Still want those 17s?... Posted via Mobile Device __________________ 1970 C10 Short Stepper with 71/72 front clip.

07-26-2013, 09:46 PM	#21
weaintscared Registered User Join Date: Mar 2011 Location: Sumter SC Posts: 439	Re: Burnouts and Idles! First time backing it out the shop,, just had to get a feel of it.. http://m.youtube.com/watch?feature=s...eature%3Dshare Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.