FIXRUPR 1987 R10 LQ4/4l80e - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brady01 · 02-08-2018, 11:33 AM

Quote:

Originally Posted by 808_67C10

That camper top! SICK!!! I want one!

Man I looked forever for a shortbed fleetside one and finally found this one for $100. I haven't seen one since! It doesn't leak a drop.

brady01 · 02-20-2018, 06:36 PM

Update! Just got a call from PSI about my harness and it's going to be shipped back tomorrow. Let me tell you about their customer service.....

My harness was chewed up by my dog. To me, it was RUINED.. I called and they laughed with me and told me to send it back and they would fix it if I didn't feel comfortable fixing it myself . So I sent it back and less than 1 week it's on its way back. Said they worked on it over an hour and replaced a LOT of it. $75 plus 20 to ship it and I have my harness back. I am 110% satisfied with that!!! I was going to lose $700 to trash it, so i think 75 is BEYOND fair! I'm so glad I went with PSI Conversions for my harness !

brady01 · 03-03-2018, 06:10 PM

Nice score today, found a good deal on some GM gaskets I was needing for my swap. Here's what I got

intake gaskets
Front cover gasket
Exhaust gaskets
Exhaust doughnut and seal (only got one of each on accident)
Oil cooler block off
Valve cover gaskets
Exhaust manifold bolts (hope I can use with my SE headers)
Coolant steamport o rings
All long head bolts, no short
Water pump gaskets
Oil pump tube o ring
And a crank bolt.

All GM in GM wrappers. Guess how much !!

$80!!!!

808_67C10 · 03-03-2018, 06:56 PM

I am so in! About to do a 5.3 swap myself... I got the motor and tranny, just everything else. LOL Sorry to hear about the dog makin the harness a snack but, it sounds like it worked out pretty good.

brady01 · 03-03-2018, 07:11 PM

Quote:

Originally Posted by 808_67C10

I am so in! About to do a 5.3 swap myself... I got the motor and tranny, just everything else. LOL Sorry to hear about the dog makin the harness a snack but, it sounds like it worked out pretty good.

It did turn out alright! You couldn't have told me that at the time it happened but it did.

808_67C10 · 03-04-2018, 12:17 PM

One thing I learned about my last 5.3... dont get the cheap knock sensors... go with the AC Delco... I changed mine and couldnt keep them from poppin code. Went to AC Delco sensors and problem solved.

brady01 · 03-04-2018, 01:36 PM

Quote:

Originally Posted by 808_67C10

One thing I learned about my last 5.3... dont get the cheap knock sensors... go with the AC Delco... I changed mine and couldnt keep them from poppin code. Went to AC Delco sensors and problem solved.

Awesome. Thanks!

brady01 · 03-09-2018, 09:27 PM

I know this thread has been boring but I have been slowly acquiring parts. Got a big order from Brian Tooley today! Going with a stage 4 truck cam and a circle d 3000-3200 stall converter. The converter will drop ship so I haven't got it yet.

808_67C10 · 03-09-2018, 10:09 PM

Ooooooo its like Christmas!

brady01 · 03-09-2018, 10:19 PM

Quote:

Originally Posted by 808_67C10

Ooooooo its like Christmas!

And I'm like a kid on Christmas waiting. Lol I'm so beyond ready to get this going

808_67C10 · 03-12-2018, 02:37 AM

Quote:

Originally Posted by brady01

Man I looked forever for a shortbed fleetside one and finally found this one for $100. I haven't seen one since! It doesn't leak a drop.

Do you have any pics of the camper on with the new wheels? I think the rallys fit the old school style of the camper... thats why I'd like to see it on with the 20s.

brady01 · 03-12-2018, 06:51 AM

Quote:

Originally Posted by 808_67C10

Do you have any pics of the camper on with the new wheels? I think the rallys fit the old school style of the camper... thats why I'd like to see it on with the 20s.

No I don't believe I do. Haven't had it on in a while..

Ski-me · 03-14-2018, 05:38 PM

What a cool transplant idea. Keeps getting me thinking about pulling the drivetrain in my suburban and putting in the K5. L18/4L85e, 14FF....

That would be cool!

brady01 · 03-14-2018, 06:33 PM

Quote:

Originally Posted by Ski-me

What a cool transplant idea. Keeps getting me thinking about pulling the drivetrain in my suburban and putting in the K5. L18/4L85e, 14FF....

That would be cool!

Do it!!!!!!!!

brady01 · 03-14-2018, 09:33 PM

I know... still boring... still buying parts. Just got a shipment from Summit of head gaskets and head bolts. Almost ready to do my cam swap now. Maybe it will start getting a little more exciting soon.

Ski-me · 03-15-2018, 11:41 AM

Quote:

Originally Posted by brady01

Do it!!!!!!!!

If someone hits my suburban (Yukon xl)....then yes, I'd grab all the parts and throw it into the Blazer. But right now, it's in amazing shape and couldn't justify it. I just paid $350 to get a deep polish on it. It really looks amazing for 170k!

brady01 · 03-17-2018, 09:25 AM

Finally made some progress last night. Stayed up til 2am changing cam, springs, valve seals, lifters, and lifter trays. Took forever because we took our time. It was my first time doing any of this, but I feel confident we did it right. I would rather do it myself and learn even if i do screw something up than to pay someone else to do it. That's just me..

brady01 · 03-20-2018, 08:00 PM

Another package... Still not as much progress as I would like... lol

You want to talk about a company that takes real pride in how they ship something. Circle D!

brady01 · 05-24-2018, 10:54 PM

Don't give up on me guys! Still stacking up parts. Getting closer every day!

**Palf70Step** · 05-25-2018, 07:40 AM

Pretty pile.....Looks like there should be a Christmas tree in picture.

brady01 · 05-25-2018, 07:41 AM

Quote:

Originally Posted by Palf70Step

Pretty pile.....Looks like there should be a Christmas tree in picture.

For sure!!!!

**Dads79GMC** · 05-27-2018, 11:52 PM

Thought I was already in on this build....guess not.....AM NOW! Looks great, Mike.

brady01 · 05-27-2018, 11:53 PM

Quote:

Originally Posted by dads79gmc

thought i was already in on this build....guess not.....am now! Looks great, mike.

🤙🤙🤙

brady01 · 05-28-2018, 08:01 PM

Looking more like an engine.

**Dads79GMC** · 05-28-2018, 08:02 PM

Looks good!!

02-20-2018, 06:36 PM	#27
brady01 Registered User Join Date: Jun 2014 Location: North GA Posts: 155	Re: FIXRUPR 1987 R10 LQ4/4l80e Update! Just got a call from PSI about my harness and it's going to be shipped back tomorrow. Let me tell you about their customer service..... My harness was chewed up by my dog. To me, it was RUINED.. I called and they laughed with me and told me to send it back and they would fix it if I didn't feel comfortable fixing it myself . So I sent it back and less than 1 week it's on its way back. Said they worked on it over an hour and replaced a LOT of it. $75 plus 20 to ship it and I have my harness back. I am 110% satisfied with that!!! I was going to lose $700 to trash it, so i think 75 is BEYOND fair! I'm so glad I went with PSI Conversions for my harness !

03-03-2018, 06:10 PM	#28
brady01 Registered User Join Date: Jun 2014 Location: North GA Posts: 155	Re: FIXRUPR 1987 R10 LQ4/4l80e Nice score today, found a good deal on some GM gaskets I was needing for my swap. Here's what I got intake gaskets Front cover gasket Exhaust gaskets Exhaust doughnut and seal (only got one of each on accident) Oil cooler block off Valve cover gaskets Exhaust manifold bolts (hope I can use with my SE headers) Coolant steamport o rings All long head bolts, no short Water pump gaskets Oil pump tube o ring And a crank bolt. All GM in GM wrappers. Guess how much !! $80!!!! Attached Images

03-03-2018, 06:56 PM	#29
808_67C10 Registered User Join Date: Sep 2011 Location: Hilo, Hawaii Posts: 1,051	Re: FIXRUPR 1987 R10 LQ4/4l80e I am so in! About to do a 5.3 swap myself... I got the motor and tranny, just everything else. LOL Sorry to hear about the dog makin the harness a snack but, it sounds like it worked out pretty good. __________________ Frank (Hilo, Hawaii) Trucks, Tacos, and Beer go together like Peanut Butter and Ladies! 85 C/10 SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=760383 67 C/10 SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=489298 79 K5 Blazer SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=657461

03-04-2018, 12:17 PM	#31
808_67C10 Registered User Join Date: Sep 2011 Location: Hilo, Hawaii Posts: 1,051	Re: FIXRUPR 1987 R10 LQ4/4l80e One thing I learned about my last 5.3... dont get the cheap knock sensors... go with the AC Delco... I changed mine and couldnt keep them from poppin code. Went to AC Delco sensors and problem solved. __________________ Frank (Hilo, Hawaii) Trucks, Tacos, and Beer go together like Peanut Butter and Ladies! 85 C/10 SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=760383 67 C/10 SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=489298 79 K5 Blazer SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=657461

03-09-2018, 09:27 PM	#33
brady01 Registered User Join Date: Jun 2014 Location: North GA Posts: 155	Re: FIXRUPR 1987 R10 LQ4/4l80e I know this thread has been boring but I have been slowly acquiring parts. Got a big order from Brian Tooley today! Going with a stage 4 truck cam and a circle d 3000-3200 stall converter. The converter will drop ship so I haven't got it yet. Attached Images

03-09-2018, 10:09 PM	#34
808_67C10 Registered User Join Date: Sep 2011 Location: Hilo, Hawaii Posts: 1,051	Re: FIXRUPR 1987 R10 LQ4/4l80e Ooooooo its like Christmas! __________________ Frank (Hilo, Hawaii) Trucks, Tacos, and Beer go together like Peanut Butter and Ladies! 85 C/10 SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=760383 67 C/10 SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=489298 79 K5 Blazer SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=657461

03-14-2018, 05:38 PM	#38
Ski-me Registered User Join Date: May 2012 Location: Colo Springs, CO Posts: 870	Re: FIXRUPR 1987 R10 LQ4/4l80e What a cool transplant idea. Keeps getting me thinking about pulling the drivetrain in my suburban and putting in the K5. L18/4L85e, 14FF.... That would be cool! __________________ - Jeff 89' K5 Blazer, 2.5" lift, 35" tires 04' GMC Yukon XL, 3/4 ton, 8.1L

03-14-2018, 09:33 PM	#40
brady01 Registered User Join Date: Jun 2014 Location: North GA Posts: 155	Re: FIXRUPR 1987 R10 LQ4/4l80e I know... still boring... still buying parts. Just got a shipment from Summit of head gaskets and head bolts. Almost ready to do my cam swap now. Maybe it will start getting a little more exciting soon.

03-17-2018, 09:25 AM	#42
brady01 Registered User Join Date: Jun 2014 Location: North GA Posts: 155	Re: FIXRUPR 1987 R10 LQ4/4l80e Finally made some progress last night. Stayed up til 2am changing cam, springs, valve seals, lifters, and lifter trays. Took forever because we took our time. It was my first time doing any of this, but I feel confident we did it right. I would rather do it myself and learn even if i do screw something up than to pay someone else to do it. That's just me.. Attached Images

03-20-2018, 08:00 PM	#43
brady01 Registered User Join Date: Jun 2014 Location: North GA Posts: 155	Re: FIXRUPR 1987 R10 LQ4/4l80e Another package... Still not as much progress as I would like... lol You want to talk about a company that takes real pride in how they ship something. Circle D! Attached Images

05-24-2018, 10:54 PM	#44
brady01 Registered User Join Date: Jun 2014 Location: North GA Posts: 155	Re: FIXRUPR 1987 R10 LQ4/4l80e Don't give up on me guys! Still stacking up parts. Getting closer every day! Attached Images

05-25-2018, 07:40 AM	#45
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,223	Re: FIXRUPR 1987 R10 LQ4/4l80e Pretty pile.....Looks like there should be a Christmas tree in picture. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-27-2018, 11:52 PM	#47
Dads79GMC Senior Member Join Date: Feb 2008 Location: Des Moines, Iowa Posts: 1,238	Re: FIXRUPR 1987 R10 LQ4/4l80e Thought I was already in on this build....guess not.....AM NOW! Looks great, Mike. __________________ Instagram @HomeBuiltC10s Dads 79 GMC Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=642929 1978 Silverado Build http://67-72chevytrucks.com/vboard/s...d.php?t=756016

05-28-2018, 08:01 PM	#49
brady01 Registered User Join Date: Jun 2014 Location: North GA Posts: 155	Re: FIXRUPR 1987 R10 LQ4/4l80e Looking more like an engine. Attached Images

05-28-2018, 08:02 PM	#50
Dads79GMC Senior Member Join Date: Feb 2008 Location: Des Moines, Iowa Posts: 1,238	Re: FIXRUPR 1987 R10 LQ4/4l80e Looks good!! __________________ Instagram @HomeBuiltC10s Dads 79 GMC Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=642929 1978 Silverado Build http://67-72chevytrucks.com/vboard/s...d.php?t=756016



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.