The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > Heavy Haulers

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-05-2020, 07:35 PM   #26
Airdirect
Registered User
 
Join Date: Oct 2016
Location: Powderly Texas
Posts: 306
Re: 1989 GMC 6000 Pickup/Toy Conversion

I bought a new blue and white 1978 3/4 ton 4X4 Silverado with that scheme. Later sold it and bought a 1979 1 ton 4X4 with a maroon and white scheme. Always liked the layout. I believe the white was Frost white. Mine both had white on the cab roof starting at the molding below the rear window. Very cool truck, I will be watch the thread for your finishing touches.
Airdirect is offline   Reply With Quote
Old 01-05-2020, 08:46 PM   #27
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: 1989 GMC 6000 Pickup/Toy Conversion

here you boys go for a little big truck action .

i look his pics over from time to time .

https://bigasstrux.com/
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 01-05-2020, 11:48 PM   #28
Bigdually
Registered User
 
Join Date: Dec 2019
Location: Elizabeth WV
Posts: 168
Re: 1989 GMC 6000 Pickup/Toy Conversion

Quote:
Originally Posted by Airdirect View Post
I bought a new blue and white 1978 3/4 ton 4X4 Silverado with that scheme. Later sold it and bought a 1979 1 ton 4X4 with a maroon and white scheme. Always liked the layout. I believe the white was Frost white. Mine both had white on the cab roof starting at the molding below the rear window. Very cool truck, I will be watch the thread for your finishing touches.
I am definitely on the hunt of some cab molding! Just not too sure yet if I plan to do the white from there up or not.... Decisions, decisions.

I'll probably make progress little by little, but I'll definitely keep the thread updated. Thanks for the compliments!

Quote:
Originally Posted by sweetk30 View Post
here you boys go for a little big truck action .

i look his pics over from time to time .

https://bigasstrux.com/
I have drooled over, err... looked over that site for a long time! The white crew cab C65 is so cool.

I've actually spoken with Mike on the phone and gotten a few ideas and a little guidance off of him when I was first beginning the build. He's a character!! But a super nice guy and very helpful.
__________________
2.5 Ton Pickup Build:
1989 GMC 6000 Pickup/Toy Conversion
Bigdually is offline   Reply With Quote
Old 01-07-2020, 09:57 AM   #29
underliner6
Registered User
 
underliner6's Avatar
 
Join Date: Oct 2013
Location: Montrose, CO
Posts: 328
Re: 1989 GMC 6000 Pickup/Toy Conversion

You are doing a killer job. Your efforts to make everything look as if it came factory is paying off.
__________________
Jim

1972 K20 Cheyenne- 350/350/205
1972 K20 Cheyenne - 350/SM465/205
1971 K5 Blazer
underliner6 is offline   Reply With Quote
Old 01-07-2020, 12:35 PM   #30
Sevens
Registered User
 
Sevens's Avatar
 
Join Date: Dec 2019
Location: Sacramento, CA
Posts: 99
Re: 1989 GMC 6000 Pickup/Toy Conversion

I am really digging this build; thank you for sharing!

Just out of curiosity, what kind of fuel (un)economy does that thing get?
Sevens is offline   Reply With Quote
Old 01-07-2020, 08:02 PM   #31
Bigdually
Registered User
 
Join Date: Dec 2019
Location: Elizabeth WV
Posts: 168
Re: 1989 GMC 6000 Pickup/Toy Conversion

Quote:
Originally Posted by underliner6 View Post
You are doing a killer job. Your efforts to make everything look as if it came factory is paying off.
Thank you! That is much appreciated! Although I may add a few touches of my own, making this look like GM rolled it off the line as a pickup has been and is my goal. I'm glad to hear folks say they see that coming to fruition in my build.

Quote:
Originally Posted by Sevens View Post
I am really digging this build; thank you for sharing!

Just out of curiosity, what kind of fuel (un)economy does that thing get?
Thanks for the compliment! It gets around 10 MPG, was doing about 7 before I switched to the Edelbrock. She loves the good stuff, and doesn't have much appetite for regular, likes to diesel a little when I run 87 octane. Seems very happy with 90 and up
__________________
2.5 Ton Pickup Build:
1989 GMC 6000 Pickup/Toy Conversion
Bigdually is offline   Reply With Quote
Old 01-07-2020, 08:44 PM   #32
Pvmt-Pndr
Registered User
 
Join Date: Jun 2017
Location: Temperance Michigan
Posts: 375
Re: 1989 GMC 6000 Pickup/Toy Conversion

Clicking through this thread makes me want to get my truck up and driving the way I want asap. Have you checked your timing? I found playing with my timing a little made a big difference in start up and shut down on my truck running the cheap stuff.i assume your truck is already hei stock. Most of what I read the tall decks like 8 degrees of timing and that's on the high side. For some reason my truck likes (427) 10 degrees better. I also only have about 2 street miles on her since I went through the engine. My wife has a 366 and I don't recall what hers is at, she's also running an edelbrock (not a avs2) and has hei.
Pvmt-Pndr is offline   Reply With Quote
Old 01-07-2020, 11:29 PM   #33
Bigdually
Registered User
 
Join Date: Dec 2019
Location: Elizabeth WV
Posts: 168
Re: 1989 GMC 6000 Pickup/Toy Conversion

Quote:
Originally Posted by Pvmt-Pndr View Post
Clicking through this thread makes me want to get my truck up and driving the way I want asap. Have you checked your timing? I found playing with my timing a little made a big difference in start up and shut down on my truck running the cheap stuff.i assume your truck is already hei stock. Most of what I read the tall decks like 8 degrees of timing and that's on the high side. For some reason my truck likes (427) 10 degrees better. I also only have about 2 street miles on her since I went through the engine. My wife has a 366 and I don't recall what hers is at, she's also running an edelbrock (not a avs2) and has hei.
I had the light on it when I was going through it doing the tune up on the carb, she's right on the mark at 8°. It's stock GM HEI. I'm really happy with how it starts up and runs, seems to really like the timing it's set at. I just think the crap fuel we have today is to blame for a lot of it.

I have read your build, I'm anticipating the day you get yours going too, it's a great truck!
__________________
2.5 Ton Pickup Build:
1989 GMC 6000 Pickup/Toy Conversion

Last edited by Bigdually; 01-08-2020 at 01:19 PM.
Bigdually is offline   Reply With Quote
Old 01-09-2020, 12:25 PM   #34
Bigdually
Registered User
 
Join Date: Dec 2019
Location: Elizabeth WV
Posts: 168
Re: 1989 GMC 6000 Pickup/Toy Conversion

Here's one I took recently from far back then zoomed in. I like it because it really shows how the bumper lines match the fender lines pretty well exactly. Kind of a Bob Ross happy accident, I noticed it several days after I'd mounted the bumper
Attached Images
 
__________________
2.5 Ton Pickup Build:
1989 GMC 6000 Pickup/Toy Conversion
Bigdually is offline   Reply With Quote
Old 01-15-2020, 09:55 AM   #35
C10 - C90 Bill
Registered User
 
C10 - C90 Bill's Avatar
 
Join Date: Nov 2001
Location: Moneta, VA USA
Posts: 3,087
Re: 1989 GMC 6000 Pickup/Toy Conversion

Quote:
Originally Posted by sweetk30 View Post
here you boys go for a little big truck action .

i look his pics over from time to time .

https://bigasstrux.com/
Thanks for posting it.

Even though I like them original, I have some room for these, lol.

I like the truck in progress.

Even though I prefer a Detroit, the 3208 is pretty cool.

And I always wanted a Pick-up with Air Brakes, lol.
__________________
'60-'72 Chev/GMC Fan
GMC 9500 Fan
Detroit Diesel Fan
C10 - C90 Bill is offline   Reply With Quote
Old 01-23-2020, 12:41 PM   #36
Bigdually
Registered User
 
Join Date: Dec 2019
Location: Elizabeth WV
Posts: 168
Re: 1989 GMC 6000 Pickup/Toy Conversion

Haven't been too busy on the truck lately, been working on my daily. Bertha takes a little too much fuel for daily commuting for my liking, although my Jeep doesn't do too much better. Gotta get my S10 back on the road!

http://67-72chevytrucks.com/vboard/s...d.php?t=800004
__________________
2.5 Ton Pickup Build:
1989 GMC 6000 Pickup/Toy Conversion
Bigdually is offline   Reply With Quote
Old 02-07-2020, 05:34 PM   #37
Bigdually
Registered User
 
Join Date: Dec 2019
Location: Elizabeth WV
Posts: 168
Re: 1989 GMC 6000 Pickup/Toy Conversion

Haven't done too much on the truck lately, been too busy working when I have the free time on my S10. I did order a new fuel filter canister and some fuel filters for it super cheap on RockAuto while I was ordering some S10 stuff. My old one had some rust pitting inside.

Shot this picture of her this evening getting home from work, poor thing looks cold.
Attached Images
 
__________________
2.5 Ton Pickup Build:
1989 GMC 6000 Pickup/Toy Conversion
Bigdually is offline   Reply With Quote
Old 02-07-2020, 09:02 PM   #38
Pvmt-Pndr
Registered User
 
Join Date: Jun 2017
Location: Temperance Michigan
Posts: 375
Re: 1989 GMC 6000 Pickup/Toy Conversion

If I took a picture of my truck right now it would look almost identical to yours. From the woods, yard to the barn almost an identical shot.
Pvmt-Pndr is offline   Reply With Quote
Old 02-08-2020, 06:51 PM   #39
Bigdually
Registered User
 
Join Date: Dec 2019
Location: Elizabeth WV
Posts: 168
Re: 1989 GMC 6000 Pickup/Toy Conversion

Quote:
Originally Posted by Pvmt-Pndr View Post
If I took a picture of my truck right now it would look almost identical to yours. From the woods, yard to the barn almost an identical shot.
Cool!

I'm missing driving mine, but with the salt all over the road and as good as the body is on this truck, she's not moving til some rain washes all that junk off the road!
__________________
2.5 Ton Pickup Build:
1989 GMC 6000 Pickup/Toy Conversion
Bigdually is offline   Reply With Quote
Old 02-08-2020, 07:20 PM   #40
Pvmt-Pndr
Registered User
 
Join Date: Jun 2017
Location: Temperance Michigan
Posts: 375
Re: 1989 GMC 6000 Pickup/Toy Conversion

I'm in the same boat as you right now. My truck will sit there while I gather parts for it and wait for the weather to break. I did drive mine about a mile a few weeks ago.

Last edited by Pvmt-Pndr; 02-11-2020 at 11:51 AM.
Pvmt-Pndr is offline   Reply With Quote
Old 04-26-2020, 12:44 PM   #41
UPNADM
Registered User
 
UPNADM's Avatar
 
Join Date: Jan 2012
Location: Lindsay, Ontario Canada
Posts: 649
Re: 1989 GMC 6000 Pickup/Toy Conversion

Quote:
Originally Posted by Bigdually View Post
One thing I discovered nearly immediately was that with a rear end ratio of 6.17, it was really humming at 45-50. I knew a gear swap was in order and I began the search. I ended up settling on a remanufactured differential geared at 4.63. Cruising at 70 MPH is now possible and the truck is altogether more fun to drive, though a gear between 3rd and 4th would be nice. The SM465 is pretty wide in ratio.
Where did you get that rear? I would love to get rid of the 6:17's in my yellow truck...
UPNADM is offline   Reply With Quote
Old 04-26-2020, 03:06 PM   #42
Bigdually
Registered User
 
Join Date: Dec 2019
Location: Elizabeth WV
Posts: 168
Re: 1989 GMC 6000 Pickup/Toy Conversion

Quote:
Originally Posted by UPNADM View Post
Where did you get that rear? I would love to get rid of the 6:17's in my yellow truck...
There is a company called Pro Gear and Transmission in Florida, I purchased a fully remanufactured center section for my differential from them. It was a little pricey, but worth it over buying a junkyard differential with unknown miles and problems for only a little less. I'm happy with the gear ratio, it ended up just about right. I would love to swap in a non OD 5 speed though.
__________________
2.5 Ton Pickup Build:
1989 GMC 6000 Pickup/Toy Conversion
Bigdually is offline   Reply With Quote
Old 05-25-2020, 03:42 PM   #43
Bigdually
Registered User
 
Join Date: Dec 2019
Location: Elizabeth WV
Posts: 168
Re: 1989 GMC 6000 Pickup/Toy Conversion

Happy Memorial Day!

Today I used the big girl for her real purpose besides cruising, I put her to work towing. I loaded the trailer pretty tongue heavy and the truck only squatted a very small amount. I only had to go less than 10 miles each way, but overall for the first time I've towed with it I'm pretty happy!
Attached Images
 
__________________
2.5 Ton Pickup Build:
1989 GMC 6000 Pickup/Toy Conversion
Bigdually is offline   Reply With Quote
Old 06-14-2020, 12:55 AM   #44
Bigdually
Registered User
 
Join Date: Dec 2019
Location: Elizabeth WV
Posts: 168
Re: 1989 GMC 6000 Pickup/Toy Conversion

Worked on the truck a little and drove it a good bit yesterday (Saturday). I washed it in the morning and got it ready to swing by a local cruise in. Nothing fancy just a bunch of cool rides, some really high dollar and high HP rods and muscle cars, a few rat rods, lots of works in progress, and lots of hanging out and talking to some really nice folks. It was a good time, got lots of people, especially the younger folks, asking about the truck and really into it. Saw a few I really was digging on myself

Installed a beautiful and perfectly functional AM/FM Delco unit before going that I got from Jeff (1774btcrew). I had a top of the line Delco ETR unit installed at one point, but it decided to quit on me and I haven't yet sent it off for repair, finding someone who knows those units is getting hard. This basic AM/FM unit works great though and pulls in the stations well. I'm excited to have music in the truck again that comes from a source other than the exhaust
Attached Images
  
__________________
2.5 Ton Pickup Build:
1989 GMC 6000 Pickup/Toy Conversion

Last edited by Bigdually; 06-14-2020 at 01:00 AM.
Bigdually is offline   Reply With Quote
Old 08-04-2020, 03:11 PM   #45
LT7A
Registered User
 
Join Date: Oct 2015
Location: PNW
Posts: 3,625
Re: 1989 GMC 6000 Pickup/Toy Conversion

Good grab on the radio. I used to be so eager to swap away the factory radio in a car and now I get excited when I come across one I can use. I really like this truck and I'm glad that you're keeping it going. I think a traditional two-tone paint job would be really cool if you decide to do it. It might kind of help blend the big truck more into the pickup theme. Regardless, it's cool as it is now. Thanks for keeping us up to date.
LT7A is offline   Reply With Quote
Old 08-07-2020, 12:00 PM   #46
Bigdually
Registered User
 
Join Date: Dec 2019
Location: Elizabeth WV
Posts: 168
Re: 1989 GMC 6000 Pickup/Toy Conversion

Quote:
Originally Posted by LT7A View Post
Good grab on the radio. I used to be so eager to swap away the factory radio in a car and now I get excited when I come across one I can use. I really like this truck and I'm glad that you're keeping it going. I think a traditional two-tone paint job would be really cool if you decide to do it. It might kind of help blend the big truck more into the pickup theme. Regardless, it's cool as it is now. Thanks for keeping us up to date.
Thanks for the compliments! The plan is still so far a two tone job, just don't know how soon I'll get that done. I was hoping for this year but I went and bought a toy. My JK Rubicon is too big to go where I want it to, and a side by side just isn't my thing. A Mahindra Roxor fits my needs perfectly. Diesel, 5 speed, nearly indestructible chassis and suspension setup, and the same width as the big side by sides now days. Plus they can be made road legal here now. So as for the truck, I did get to use the truck to haul the Roxor home but it kinda hurts the funds for paint work
Attached Images
   
__________________
2.5 Ton Pickup Build:
1989 GMC 6000 Pickup/Toy Conversion
Bigdually is offline   Reply With Quote
Old 08-08-2020, 04:14 AM   #47
Pvmt-Pndr
Registered User
 
Join Date: Jun 2017
Location: Temperance Michigan
Posts: 375
Re: 1989 GMC 6000 Pickup/Toy Conversion

It looks good doing work! I've looked at those roxors before and they look like a lot of fun. The radio looks great also.
Pvmt-Pndr is offline   Reply With Quote
Old 08-13-2020, 11:44 AM   #48
Bigdually
Registered User
 
Join Date: Dec 2019
Location: Elizabeth WV
Posts: 168
Re: 1989 GMC 6000 Pickup/Toy Conversion

Quote:
Originally Posted by Pvmt-Pndr View Post
It looks good doing work! I've looked at those roxors before and they look like a lot of fun. The radio looks great also.
Thanks! I'm happy with the radio and the Roxor both, had way too much fun lately exploring some trails I haven't run for years.

My future father in law bought a new tractor, and the dealership wanted a crazy delivery fee. I picked it up for him and towed it about 30 miles home. The truck did just fine towed like a champ. The need for either a) more power or b) closer transmission ratios is easier to see the more I tow, but for as heavy as the tractor was with the attachments I was pretty happy with how it did.
Attached Images
 
__________________
2.5 Ton Pickup Build:
1989 GMC 6000 Pickup/Toy Conversion
Bigdually is offline   Reply With Quote
Old 11-05-2020, 09:10 PM   #49
STPETEBLUE
Registered User
 
STPETEBLUE's Avatar
 
Join Date: Jul 2017
Location: St. Petersburg, FL
Posts: 88
Re: 1989 GMC 6000 Pickup/Toy Conversion

Really love your build. I have wanted one of these for a long time. I do not have the skills, equipment, or space to do this kind of thing, so I contacted Mike at Big Ass Trucks. Neither of the trucks he had for sale or in progress had A/C, very important, down here, so he went on the hunt for one. On his site, under SOLD is my truck. It is the 1989 TopKick Ex-Ryder truck.

He left it for me to finish the little things, and I am curious. Where did you get the step bumper? Also, what is your source for the bed lights? I have only found one source for the fender clearance lights.

I would also like to know about the Christmas lights. Were they 12 volt or did you use a power inverter for 110volt? I'm assuming they are LED.

Thanks, and enjoy the ride. I know I am.
__________________
Daily Driver:
2005 Chevrolet Silverado 3500 Dually 6.6L LLY Duramax Diesel and an Allison 5 Speed
Currently looking for an Action Line truck, specifically 1969-1970, in very good condition. Longbed only, step or fleetside, or flatbed if C30. Must be unmolested (not modded).

Last edited by STPETEBLUE; 11-06-2020 at 12:51 AM.
STPETEBLUE is offline   Reply With Quote
Old 11-06-2020, 12:05 PM   #50
Bigdually
Registered User
 
Join Date: Dec 2019
Location: Elizabeth WV
Posts: 168
Re: 1989 GMC 6000 Pickup/Toy Conversion

Quote:
Originally Posted by STPETEBLUE View Post
Really love your build. I have wanted one of these for a long time. I do not have the skills, equipment, or space to do this kind of thing, so I contacted Mike at Big Ass Trucks. Neither of the trucks he had for sale or in progress had A/C, very important, down here, so he went on the hunt for one. On his site, under SOLD is my truck. It is the 1989 TopKick Ex-Ryder truck.

He left it for me to finish the little things, and I am curious. Where did you get the step bumper? Also, what is your source for the bed lights? I have only found one source for the fender clearance lights.

I would also like to know about the Christmas lights. Were they 12 volt or did you use a power inverter for 110volt? I'm assuming they are LED.

Thanks, and enjoy the ride. I know I am.

Great looking truck! There's a TON of potential there, I really like it. I talked to Mike when I was beginning to build mine, he clued me in on a few things I'd run into and what height above the frame I would have to mount the bed to get it to line up. He was quite helpful and really knows these trucks inside out.

The step bumper was tricky, I hunted EVERYWHERE for a long time and could find nobody who had one or makes one for a square body anymore. I was out of town for a week and one popped up for sale on Facebook. My girlfriend's dad drove two hours one way to go get it for me. The fender clearance lights came from USA1 Industries. They were backordered forever but I did finally get them.

My Christmas setup was actually all incandescent lights, I ran them on a 2000 watt quiet Honda generator in the bed, you couldn't even hear it over the truck idling. I could have ran way more lights and this year hopefully I can.

Looking forward to more pics and a build thread on yours!
__________________
2.5 Ton Pickup Build:
1989 GMC 6000 Pickup/Toy Conversion

Last edited by Bigdually; 11-06-2020 at 12:12 PM.
Bigdually is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:08 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com