No. I am not dead yet. So here's a question on Chassis Stiffening... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

88Stanger · 03-14-2020, 06:24 PM

So, i got the Summit frame Brace in and here are some pics. It includes Engine Mounts that work with Early Tall and Narrow engine mounts and some LS mounts. It also comes with a tranny mount that will work with old and new transmissions, auto and 4-Speeds.
Please note that i have yet to test the Engine and tranny mount.
There are 4 separate pieces that bolt to the inside of the frame then the main brace bolts to them.

88Stanger · 03-14-2020, 06:25 PM

more of the engine mount

88Stanger · 03-14-2020, 06:27 PM

transmission mount

88Stanger · 03-14-2020, 06:27 PM

more tanny mount

88Stanger · 03-14-2020, 06:28 PM

couple more on tranny mount

88Stanger · 03-14-2020, 06:30 PM

actual frame brace

88Stanger · 03-14-2020, 06:31 PM

more

88Stanger · 03-14-2020, 06:37 PM

more 2

88Stanger · 03-14-2020, 06:38 PM

and more

88Stanger · 03-14-2020, 06:39 PM

more

88Stanger · 03-14-2020, 06:44 PM

more1

88Stanger · 03-14-2020, 06:45 PM

more

88Stanger · 03-14-2020, 06:47 PM

Frame to brace mount

88Stanger · 03-14-2020, 06:48 PM

frame to brace 2

88Stanger · 03-14-2020, 06:49 PM

frame to brace 3

88Stanger · 03-14-2020, 06:50 PM

1 more

88Stanger · 03-14-2020, 06:54 PM

here is a you tube of the install of this kit
https://youtu.be/fqylwMmE4m4

SCOTI · 03-14-2020, 07:35 PM

Looks like a decent kit. I watched the video & seems like a straight forward install as well. Not sure how well it would work on extreme dropped trucks though so that needs to be considered for those it applies to.

Any idea on the weight of the kit pieces?

*EDIT*
That price kind of stings though. I also saw when I looked it up that the only comment registered online was that it didn't fit under the floor of a guys 68 C10 from Georgia (he didn't clarify on what was causing the interference).

88Stanger · 03-14-2020, 08:34 PM

Quote:

Originally Posted by SCOTI

Looks like a decent kit. I watched the video & seems like a straight forward install as well. Not sure how well it would work on extreme dropped trucks though so that needs to be considered for those it applies to.

Any idea on the weight of the kit pieces?

*EDIT*
That price kind of stings though. I also saw when I looked it up that the only comment registered online was that it didn't fit under the floor of a guys 68 C10 from Georgia (he didn't clarify on what was causing the interference).

I believe it is just over 100lbs

Paul Y · 03-15-2020, 07:23 PM

Thank you very much for the detailed pictures.

What diameter tubing do they use? And what gauge are the mounts?

I would probably buy that kit if I was in the States but the shipping would kill the deal so going to have to plagiarise the design.

P.

88Stanger · 03-16-2020, 09:48 PM

Quote:

Originally Posted by Paul Y

Thank you very much for the detailed pictures.

What diameter tubing do they use? And what gauge are the mounts?

I would probably buy that kit if I was in the States but the shipping would kill the deal so going to have to plagiarise the design.

P.

I will measure the tubes and the thickness of the tube and mounts for you. if you want any other info, please let me know, im happy to help.

with all this craziness over this "Flu" it seems i have alot of spare alone time to work on the truck, so.... lol dont worry, i will use gloves when working with the old girl.... lol

SCOTI · 03-17-2020, 01:39 AM

Quote:

Originally Posted by 88Stanger

I will measure the tubes and the thickness of the tube and mounts for you. if you want any other info, please let me know, im happy to help.

with all this craziness over this "Flu" it seems i have alot of spare alone time to work on the truck, so.... lol dont worry, i will use gloves when working with the old girl.... lol

Kudos for helping others make decisions on their course of action. The current state of our world is FUBAR @ a minimum.

Paul Y · 03-17-2020, 08:08 AM

As I work for my own business I doubt very much if I will get any additional time in the garage - working form home with a staff of 15 is tricky, thankfully they are all professionals and know what has to be done so I can leave them too it. The problem is our customers!

If I was to provide a schematic of the brace could you fill in the dimensions? I am not going to replace my control arm crossmember but use that to secure the tubular braces too. I am surprised that my initial rough sketch is pretty close to the Summit design.

Really appreciate you taking the time to do this.

Keep safe everyone.

P.

88Stanger · 03-18-2020, 08:19 AM

Quote:

Originally Posted by SCOTI

Kudos for helping others make decisions on their course of action. The current state of our world is FUBAR @ a minimum.

Thank you sir. It is sad what i going on in this world today. It is sad to see how some people are to others, taking boxes and boxes of toilet paper, cases and cases of baby food, milk and such, mean while the elderly are left to fend for themselves, just pisses me off. We really could use alot more of God in our lives, just my thought. Anyways... sorry off topic....

I will try to help anyone as much as i can on this, I did see that summit has them listed to ship immediately now, just an FYI to anyone looking, as of yesterday.
With all this "extra" time to spare to myself, lots will get done soon. LOL

88Stanger · 03-18-2020, 08:20 AM

Quote:

Originally Posted by Paul Y

As I work for my own business I doubt very much if I will get any additional time in the garage - working form home with a staff of 15 is tricky, thankfully they are all professionals and know what has to be done so I can leave them too it. The problem is our customers!

If I was to provide a schematic of the brace could you fill in the dimensions? I am not going to replace my control arm crossmember but use that to secure the tubular braces too. I am surprised that my initial rough sketch is pretty close to the Summit design.

Really appreciate you taking the time to do this.

Keep safe everyone.

P.

I will help as much as i can. just let me know.

Jeff

03-14-2020, 06:24 PM	#26
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... So, i got the Summit frame Brace in and here are some pics. It includes Engine Mounts that work with Early Tall and Narrow engine mounts and some LS mounts. It also comes with a tranny mount that will work with old and new transmissions, auto and 4-Speeds. Please note that i have yet to test the Engine and tranny mount. There are 4 separate pieces that bolt to the inside of the frame then the main brace bolts to them. Attached Images

03-14-2020, 06:25 PM	#27
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... more of the engine mount Attached Images

03-14-2020, 06:27 PM	#28
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... transmission mount Attached Images

03-14-2020, 06:27 PM	#29
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... more tanny mount Attached Images

03-14-2020, 06:28 PM	#30
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... couple more on tranny mount Attached Images

03-14-2020, 06:30 PM	#31
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... actual frame brace Attached Images

03-14-2020, 06:31 PM	#32
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... more Attached Images

03-14-2020, 06:37 PM	#33
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... more 2 Attached Images

03-14-2020, 06:38 PM	#34
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... and more Attached Images

03-14-2020, 06:39 PM	#35
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... more Attached Images

03-14-2020, 06:44 PM	#36
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... more1 Attached Images

03-14-2020, 06:45 PM	#37
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... more Attached Images

03-14-2020, 06:47 PM	#38
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... Frame to brace mount Attached Images

03-14-2020, 06:48 PM	#39
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... frame to brace 2 Attached Images

03-14-2020, 06:49 PM	#40
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... frame to brace 3 Attached Images



Register or Log In To remove these advertisements.

03-14-2020, 06:50 PM	#41
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... 1 more Attached Images

03-14-2020, 06:54 PM	#42
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,654	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... here is a you tube of the install of this kit https://youtu.be/fqylwMmE4m4

03-14-2020, 07:35 PM	#43
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... Looks like a decent kit. I watched the video & seems like a straight forward install as well. Not sure how well it would work on extreme dropped trucks though so that needs to be considered for those it applies to. Any idea on the weight of the kit pieces? EDIT That price kind of stings though. I also saw when I looked it up that the only comment registered online was that it didn't fit under the floor of a guys 68 C10 from Georgia (he didn't clarify on what was causing the interference). __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 03-14-2020 at 07:45 PM.

03-15-2020, 07:23 PM	#45
Paul Y Registered User Join Date: Jul 2013 Location: Essex Posts: 950	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... Thank you very much for the detailed pictures. What diameter tubing do they use? And what gauge are the mounts? I would probably buy that kit if I was in the States but the shipping would kill the deal so going to have to plagiarise the design. P. __________________ Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet...

03-17-2020, 08:08 AM	#48
Paul Y Registered User Join Date: Jul 2013 Location: Essex Posts: 950	Re: No. I am not dead yet. So here's a question on Chassis Stiffening... As I work for my own business I doubt very much if I will get any additional time in the garage - working form home with a staff of 15 is tricky, thankfully they are all professionals and know what has to be done so I can leave them too it. The problem is our customers! If I was to provide a schematic of the brace could you fill in the dimensions? I am not going to replace my control arm crossmember but use that to secure the tubular braces too. I am surprised that my initial rough sketch is pretty close to the Summit design. Really appreciate you taking the time to do this. Keep safe everyone. P. __________________ Woody's Build - http://67-72chevytrucks.com/vboard/s...d.php?t=658621 If it goes wrong, I blame the Internet...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.