47-55.1 Glove box not closing correctly - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Zippi · 06-27-2021, 08:06 AM

When I installed mine I not only had to adjust the tab to get it to shut as best it would I also had to play around with the (4) screws (two on each side) to get the gaps right. Best I can remember they all come into play. I had to keep making adjustments until I got it the way I wanted.

Greyhound101 · 06-28-2021, 11:39 AM

Quote:

Originally Posted by Zippi

When I installed mine I not only had to adjust the tab to get it to shut as best it would I also had to play around with the (4) screws (two on each side) to get the gaps right. Best I can remember they all come into play. I had to keep making adjustments until I got it the way I wanted.

Yes, I had to do the same thing. Once I got the tab to fit as best as I could, I played around with the hinge screws to get it to shut better. It's not perfect, but you have to look really close to see it's not perfect.

06-27-2021, 08:06 AM	#26
Zippi Registered User Join Date: Nov 2019 Location: Southern Indiana Posts: 588	Re: Glove box not closing correctly When I installed mine I not only had to adjust the tab to get it to shut as best it would I also had to play around with the (4) screws (two on each side) to get the gaps right. Best I can remember they all come into play. I had to keep making adjustments until I got it the way I wanted. Attached Images __________________ If you can't fix it with duct tape, it's an electrical problem. 1949 5 Window 3100 https://zippi6.wixsite.com/adtruck

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.