What did you do to your truck today.The 3rd chapter - Page 23 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72c20customcamper · 05-08-2019, 02:26 PM

Manuals

http://67-72chevytrucks.com/vboard/s...ghlight=hatzie

Ganty101 · 05-08-2019, 04:19 PM

Quote:

Originally Posted by 72c20customcamper

Manuals

http://67-72chevytrucks.com/vboard/s...ghlight=hatzie

Thanks

**Steeveedee** · 05-08-2019, 06:58 PM

Quote:

Originally Posted by 72c20customcamper

Manuals

http://67-72chevytrucks.com/vboard/s...ghlight=hatzie

That's what I'm talking about! I'll re-save that book mark, now.

And I almost had a heart attack, because at first I thought you were crushing that bed!

72c20customcamper · 05-08-2019, 07:55 PM

Why would I do that ? Going for sand blasting and then paint. I'm going to have to redo this one right . So grumpy it just may happen full repaint.

**Grumpy old man** · 05-08-2019, 08:22 PM

" So grumpy it just may happen full repaint. "

Ahh Ha , It only makes sense when your investing money in your project !

**Ol Blue K20** · 05-08-2019, 09:27 PM

I drove mine today.....abot forty miles.......a lot fuel. ....LOL

Simple10 · 05-08-2019, 11:36 PM

Got the polish out on the wheels
Before and after

Ganty101 · 05-09-2019, 02:09 AM

Got this sweet keyring. Handmade in the uk and loads of choice of badges!

70 shorty · 05-09-2019, 07:12 AM

spent the last 2 days putting a clutch in mine. Yes, those of you who frequently do clutches probably could have done it in a few hours. We spent about 4 hours trying to get the old pilot bushing out, then had problems with the ball stud in the bell housing and the spring that clips it to the clutch fork. Had a good friend scrounge those parts up from stuff they had laying around at the house. Then didn't get the Hurst shifter stick back in correctly, and it took another hour or so to figure that simple fix out. The truck is back home with no passenger side exhaust as we took that apart to give us room, and didn't have replacement collector bolts or a gasket at 9:00 last night. That was an adventure to drive it with open exhaust! I'll button that up today and be completely done.

72c20customcamper · 05-09-2019, 08:31 AM

Quote:

Originally Posted by Grumpy old man

" So grumpy it just may happen full repaint. "

Ahh Ha , It only makes sense when your investing money in your project !

Still won't be a show truck though. Just a nice single stage urethane paint. Doing it myself

OregonNed · 05-09-2019, 10:59 AM

Quote:

Originally Posted by Simple10

Got the polish out on the wheels
Before and after

Looks very good!

197D_C10 · 05-10-2019, 05:21 PM

Pulled out the old crappy carpet and laid down some POR15, sound deadener, and new carpet. Now my seat looks like crap so that will be my next project.

**SoCoC10** · 05-10-2019, 06:08 PM

Sent her on her way to her new owner.

**zicc1835** · 05-10-2019, 08:19 PM

Quote:

Originally Posted by 197D_C10

Pulled out the old crappy carpet and laid down some POR15, sound deadener, and new carpet. Now my seat looks like crap so that will be my next project.

carpet looks great

72c20customcamper · 05-11-2019, 06:17 PM

Made the dolly for my bed. And painted the passenger side of the frame. Doing this one outside so I have to wait on the weather. Talked to two dustless blasters the cheapest was 600 $ to blast the inside of the bed and back half of the frame. Not happening , sanded acid etch then epoxy prime . PPG urethane black top coat ,it works for a driver. Do the rest on the next nice day. Going to do the trailing arm and link bushings when they come in so I'll do the rear and arms then off the truck.

Bearhawg · 05-11-2019, 09:48 PM

Installed new Tough Stuff PS pump and finally figured out the correct routing of the PS lines only to find that the CPP pulley was junk and Wobbles

beaterku · 05-13-2019, 11:19 AM

The beast is alive! Built 6.0 LS. Still needs exhaust. Running open headers in this video.

You Tube

**zicc1835** · 05-13-2019, 06:25 PM

Quote:

Originally Posted by 72c20customcamper

Made the dolly for my bed. And painted the passenger side of the frame. Doing this one outside so I have to wait on the weather. Talked to two dustless blasters the cheapest was 600 $ to blast the inside of the bed and back half of the frame. Not happening , sanded acid etch then epoxy prime . PPG urethane black top coat ,it works for a driver. Do the rest on the next nice day. Going to do the trailing arm and link bushings when they come in so I'll do the rear and arms then off the truck.

that came out real nice.... nice work ...that dustless blast guy must have more work than he can handle

or something ....he chased you away with that price I been thinking about buying me one of them units for a retirement job ...my wife is figting me about it says Im crazy I figure I can take the jobs I want and will pay for it self in no time 12k gets you in...no overhead back it in the garage for storage no employees no wotrkers comp and lots of cash deals of corse I would repot all of the earnings to my Uncle .....

72c20customcamper · 05-13-2019, 08:10 PM

Quote:

Originally Posted by zicc1835

that came out real nice.... nice work ...that dustless blast guy must have more work than he can handle

or something ....he chased you away with that price I been thinking about buying me one of them units for a retirement job ...my wife is figting me about it says Im crazy I figure I can take the jobs I want and will pay for it self in no time 12k gets you in...no overhead back it in the garage for storage no employees no wotrkers comp and lots of cash deals of corse I would repot all of the earnings to my Uncle .....

Thanks for the compliment.

And yes the price was out of hand . I did the dolly in the morning cause it was cloudy and cool . Warmed up nicely so I started the frame took me about 4 hours with a rotary sander and wire brushes on the angle grinder. He would have had everything done in that 4 hours. His real costs are a few pounds of glass and some gas for the compressor. I had to supply the water too.

sloGMC · 05-14-2019, 04:45 AM

Removed a previous owners' "ford solenoid mod" and a bunch of non-functioning or redundant electrical garbage, while overhauling the whole system. Not the most fun way to spend your weekend.

**Boog** · 05-14-2019, 07:36 AM

I went out to the shop to move the truck out so to move another one in and found this. It's an old tire but was still holding air so I've waited to replace it. It was good enough for a roller.
Guess I'll be ordering another tire now.

Redneck Rydes · 05-14-2019, 09:47 AM

I have a few of those,have a pile of aired up rollors to put on a frame to move around,one day was in the shop and Kaboom, scared the crap oit of me,thought the neighbour finally blew himself up smoking with oxygen tank hooked up,went outside and found the tire.

**Austinjay** · 05-14-2019, 09:49 AM

Painted the new front bumper and grill guard for the 565 truck. Can't wait to put it on.

bmxbang · 05-15-2019, 05:57 PM

Used it.

72c20customcamper · 05-15-2019, 06:36 PM

Quote:

Originally Posted by bmxbang

Used it.

Me too. Wood for the 68 long step bed

05-08-2019, 02:26 PM	#551
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,718	Re: What did you do to your truck today.The 3rd chapter Manuals http://67-72chevytrucks.com/vboard/s...ghlight=hatzie __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

05-08-2019, 07:55 PM	#554
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,718	Re: What did you do to your truck today.The 3rd chapter Why would I do that ? Going for sand blasting and then paint. I'm going to have to redo this one right . So grumpy it just may happen full repaint. __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

05-08-2019, 08:22 PM	#555
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: What did you do to your truck today.The 3rd chapter " So grumpy it just may happen full repaint. " Ahh Ha , It only makes sense when your investing money in your project ! __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

05-08-2019, 09:27 PM	#556
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: What did you do to your truck today.The 3rd chapter I drove mine today.....abot forty miles.......a lot fuel. ....LOL __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

05-08-2019, 11:36 PM	#557
Simple10 Registered User Join Date: Apr 2019 Location: Australia Posts: 72	Re: What did you do to your truck today.The 3rd chapter Got the polish out on the wheels Before and after Attached Images

05-09-2019, 02:09 AM	#558
Ganty101 Registered User Join Date: Apr 2019 Location: Yorkshire UK Posts: 75	Re: What did you do to your truck today.The 3rd chapter Got this sweet keyring. Handmade in the uk and loads of choice of badges! Attached Images

05-09-2019, 07:12 AM	#559
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,772	Re: What did you do to your truck today.The 3rd chapter spent the last 2 days putting a clutch in mine. Yes, those of you who frequently do clutches probably could have done it in a few hours. We spent about 4 hours trying to get the old pilot bushing out, then had problems with the ball stud in the bell housing and the spring that clips it to the clutch fork. Had a good friend scrounge those parts up from stuff they had laying around at the house. Then didn't get the Hurst shifter stick back in correctly, and it took another hour or so to figure that simple fix out. The truck is back home with no passenger side exhaust as we took that apart to give us room, and didn't have replacement collector bolts or a gasket at 9:00 last night. That was an adventure to drive it with open exhaust! I'll button that up today and be completely done. __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

05-10-2019, 05:21 PM	#562
197D_C10 Registered User Join Date: Dec 2015 Location: Fresno, CA Posts: 45	Re: What did you do to your truck today.The 3rd chapter Pulled out the old crappy carpet and laid down some POR15, sound deadener, and new carpet. Now my seat looks like crap so that will be my next project. Attached Images

05-10-2019, 06:08 PM	#563
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,334	Re: What did you do to your truck today.The 3rd chapter Sent her on her way to her new owner. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

05-11-2019, 06:17 PM	#565
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,718	Re: What did you do to your truck today.The 3rd chapter Made the dolly for my bed. And painted the passenger side of the frame. Doing this one outside so I have to wait on the weather. Talked to two dustless blasters the cheapest was 600 $ to blast the inside of the bed and back half of the frame. Not happening , sanded acid etch then epoxy prime . PPG urethane black top coat ,it works for a driver. Do the rest on the next nice day. Going to do the trailing arm and link bushings when they come in so I'll do the rear and arms then off the truck. Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

05-11-2019, 09:48 PM	#566
Bearhawg Registered User Join Date: Feb 2018 Location: Snellville GA Posts: 104	Re: What did you do to your truck today.The 3rd chapter Installed new Tough Stuff PS pump and finally figured out the correct routing of the PS lines only to find that the CPP pulley was junk and Wobbles

05-14-2019, 04:45 AM	#570
sloGMC Registered User Join Date: Jun 2018 Location: Central Coast, CA Posts: 126	Re: What did you do to your truck today.The 3rd chapter Removed a previous owners' "ford solenoid mod" and a bunch of non-functioning or redundant electrical garbage, while overhauling the whole system. Not the most fun way to spend your weekend. __________________ 1971 Pontiac Firebird 1971 GMC C2500

05-14-2019, 07:36 AM	#571
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,524	Re: What did you do to your truck today.The 3rd chapter I went out to the shop to move the truck out so to move another one in and found this. It's an old tire but was still holding air so I've waited to replace it. It was good enough for a roller. Guess I'll be ordering another tire now. Attached Images __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

05-14-2019, 09:47 AM	#572
Redneck Rydes Registered User Join Date: Feb 2016 Location: Trenton,Ontario & South Carolina Posts: 755	Re: What did you do to your truck today.The 3rd chapter I have a few of those,have a pile of aired up rollors to put on a frame to move around,one day was in the shop and Kaboom, scared the crap oit of me,thought the neighbour finally blew himself up smoking with oxygen tank hooked up,went outside and found the tire.

05-14-2019, 09:49 AM	#573
Austinjay Senior Member Join Date: Nov 2014 Location: Brighton, Colorado Posts: 350	Re: What did you do to your truck today.The 3rd chapter Painted the new front bumper and grill guard for the 565 truck. Can't wait to put it on. Attached Images __________________ '72 K20 Ochre/white 350/350/205 4" Lift 35's '72 GMC K10 red orange/white 400/350/205 '69 C20 Longhorn 454 TH400 '72 Blazer CST 4x4 '70 Blazer 4X4



Register or Log In To remove these advertisements.

05-15-2019, 05:57 PM	#574
bmxbang Registered User Join Date: Aug 2018 Location: Blue Springs, MO Posts: 102	Re: What did you do to your truck today.The 3rd chapter Used it. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.