What did you do to your truck today? - Page 290 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

198plus · 03-22-2013, 04:02 PM

Quote:

Originally Posted by towersddg9

bed on, still gotta get it lined up

Looks great !!!!

waspp · 03-22-2013, 05:40 PM

Loaded mine on the trailer to take to the shop for a new custom exhaust. Getting close now!

66-PMD-GMC · 03-22-2013, 05:49 PM

Quote:

Originally Posted by waspp

Loaded mine on the trailer to take to the shop for a new custom exhaust. Getting close now!

Nice grill... wish I could find a straight 63 grill..

Turkey · 03-22-2013, 06:44 PM

Name: image.jpg
Views: 567
Size: 50.1 KB

Rust repair goes on and on
Posted via Mobile Device

waspp · 03-22-2013, 08:44 PM

Had to post this, a good before pic on the same trailer when I brought it home a year and a half ago.

Lugnutz65 · 03-22-2013, 09:56 PM

Opened up my doors!

DS DOOR

PS DOOR

akaupp · 03-23-2013, 08:26 PM

Drove mine for the first time with the new rear axle. Everything seems to be working properly so far, but I've just had it around town. I also picked up a sweet step bumper that was originally on a railroad truck. I'll get pics of the bumper tomorrow for you.

dantimdad · 03-23-2013, 08:54 PM

Cleaned the shop and decided to remove the inner portion of the hood to sand blast it and rust proof. Plus, it'll make welding in the patch panel easier.

Steven

racecougar · 03-23-2013, 09:07 PM

I cut a hole in it.

Then spent awhile fitting up the new panel. If I make it over to the shop tomorrow, I'll start welding it in.

jbgroby · 03-23-2013, 10:04 PM

You make it look so easy.

CRGRS 66 · 03-23-2013, 10:29 PM

Spent about 1.5 hours with the wire wheel on the firewall, rest of the day sand blasting parts.

Blue_Aura · 03-24-2013, 12:27 AM

Ripped out the blown engine today. Next it's time to clean up the firewall and the frame and get them ready to repaint. Looks like I'll be buying some more wire wheels!

I've got a rebuilt cluster coming next week. I was about to restore mine, but I found a guy in Las Vegas that gave me a great deal. Works out good, since I have so much to do to the truck by June.
Posted via Mobile Device
Posted via Mobile Device

Trsmotrhed · 03-24-2013, 01:22 PM

Installing my new autometer phantom gauges.

Posted via Mobile Device

wutnxt · 03-24-2013, 04:49 PM

I managed to purchase a altenator for the 6.2 LSA supercharger set up for the 66 project low and go.....But i can't seem to purchase the bracket I need from ebay ......apparently I am a international customer and they don't roll that way....

towersddg9 · 03-24-2013, 05:57 PM

did the driver side glass and vent window, it was actually an easy job, (thanks to some help from members here) I bought the door glass off ebay it fit great, so did the new vent window (classic parts)

padresag · 03-24-2013, 07:44 PM

Quote:

Originally Posted by wutnxt

I managed to purchase a altenator for the 6.2 LSA supercharger set up for the 66 project low and go.....But i can't seem to purchase the bracket I need from ebay ......apparently I am a international customer and they don't roll that way....

if you have a US shipping address you get around that. over here we use an outfit called Seawings express international. they have a Blaine address and they bring stuff over daily $17.00 brings over 5lbs. pick it up at Victoria airport, whisk it through customs and your gone. there must be someone doing that at Abbotsford,a/port. US shipping to Blaine is usually minimal so in the end it doesn't make much difference and you don't have to pay those courier ripoff brokers fees.
ron

198plus · 03-24-2013, 08:49 PM

Quote:

Originally Posted by towersddg9

did the driver side glass and vent window, it was actually an easy job, (thanks to some help from members here) I bought the door glass off ebay it fit great, so did the new vent window (classic parts)

Looks nice, is that a new vent window.

awbrown · 03-24-2013, 08:58 PM

Took it out for a drive ! First drive of the spring !!!

T Smith · 03-24-2013, 09:20 PM

Got the rear done last week, worked on the front this weekend..

towersddg9 · 03-25-2013, 03:43 PM

Quote:

Originally Posted by 198plus

Looks nice, is that a new vent window.

Thanks 198, looking forward to seeing your truck finished, those vent windows are new got em from Classic Parts, I was sweating the fitment as I've read here somewhere that some have had issues, these went right in and fit great

Thanks again for the feedback
Posted via Mobile Device

markeb01 · 03-25-2013, 04:28 PM

Thanks for sharing that they fit well. I'd like to add those to my truck someday, along with the chrome frames on the side glass. I think they'd upgrade the cab every bit as much as the stainless windshield trim.

forestb · 03-25-2013, 04:36 PM

Quote:

Originally Posted by T Smith

Got the rear done last week, worked on the front this weekend..

I don't mean to high jack the thread but how do the bottom of the bags attach to the lower control arms or do they just sit in the pockets?

dantimdad · 03-25-2013, 07:17 PM

My script valve covers arrived from Don today!

Woohoo!

They look great.

Now, to mod them for a PCV valve and a baffle and then repaint.

Steven

Ta2Don · 03-25-2013, 07:20 PM

Glad you like them, but, what no pics? LOL
Posted via Mobile Device

T Smith · 03-25-2013, 07:40 PM

Quote:

Originally Posted by forestb

I don't mean to high jack the thread but how do the bottom of the bags attach to the lower control arms or do they just sit in the pockets?

The bottom of the bag bolts to a cup that just sits in the spring pocket.

03-22-2013, 05:40 PM	#7227
waspp Registered User Join Date: Sep 2011 Location: Maryville TN Posts: 201	Re: What did you do to your truck today? Loaded mine on the trailer to take to the shop for a new custom exhaust. Getting close now!

03-22-2013, 06:44 PM	#7229
Turkey Registered User Join Date: Dec 2009 Location: Orlando, Florida Posts: 427	Re: What did you do to your truck today? Rust repair goes on and on Posted via Mobile Device __________________

03-22-2013, 08:44 PM	#7230
waspp Registered User Join Date: Sep 2011 Location: Maryville TN Posts: 201	Re: What did you do to your truck today? Had to post this, a good before pic on the same trailer when I brought it home a year and a half ago.

03-22-2013, 09:56 PM	#7231
Lugnutz65 Registered User Join Date: Jan 2013 Location: Columbia, SC Posts: 1,927	Re: What did you do to your truck today? Opened up my doors! DS DOOR PS DOOR __________________ My 65 C10 build: www.lugnutz65chevystepside.weebly.com Want to know more about T5 transmissions? My website has a T5 Info Page and a Step by Step T5 rebuild.

03-23-2013, 08:26 PM	#7232
akaupp Registered User Join Date: Jan 2013 Location: West Point, UT Posts: 235	Re: What did you do to your truck today? Drove mine for the first time with the new rear axle. Everything seems to be working properly so far, but I've just had it around town. I also picked up a sweet step bumper that was originally on a railroad truck. I'll get pics of the bumper tomorrow for you.

03-23-2013, 08:54 PM	#7233
dantimdad Registered User Join Date: Feb 2010 Location: Hartselle, Al. Posts: 466	Re: What did you do to your truck today? Cleaned the shop and decided to remove the inner portion of the hood to sand blast it and rust proof. Plus, it'll make welding in the patch panel easier. Steven __________________ “Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla Matt. 6:27 "Who of you by worrying can add a single hour to his life?” http://www.67-72chevytrucks.com/vboa...=507266&page=2

03-23-2013, 09:07 PM	#7234
racecougar Registered User Join Date: Jan 2013 Location: Imperial, MO Posts: 1,003	Re: What did you do to your truck today? I cut a hole in it. Then spent awhile fitting up the new panel. If I make it over to the shop tomorrow, I'll start welding it in. __________________ Rod @ AzzKicker Cars 1965 C10 SWB - Build Thread

03-23-2013, 10:04 PM	#7235
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: What did you do to your truck today? You make it look so easy. __________________ http://s1299.photobucket.com/user/jb...23904108567829

03-23-2013, 10:29 PM	#7236
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: What did you do to your truck today? Spent about 1.5 hours with the wire wheel on the firewall, rest of the day sand blasting parts. __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

03-24-2013, 12:27 AM	#7237
Blue_Aura Registered User Join Date: Aug 2012 Location: Tracy, CA Posts: 251	Re: What did you do to your truck today? Ripped out the blown engine today. Next it's time to clean up the firewall and the frame and get them ready to repaint. Looks like I'll be buying some more wire wheels! I've got a rebuilt cluster coming next week. I was about to restore mine, but I found a guy in Las Vegas that gave me a great deal. Works out good, since I have so much to do to the truck by June. Posted via Mobile Device Posted via Mobile Device Attached Images __________________ Current Vehicles: '62 C10 - 350 (current project), '03 Tahoe (C Series) Some Past Projects: '69 Nova - 350 , '70 1/2 Camaro Z28 - LT1 350, '73 K20 Full-time 4x4 - 400 SB, '77 1/2 Camaro Z28 - 350, '84 Camaro Z28 - 305, '68 Buick - 430 BB

03-24-2013, 01:22 PM	#7238
Trsmotrhed Registered User Join Date: Mar 2012 Location: Pueblo West, Colorado Posts: 430	Re: What did you do to your truck today? Installing my new autometer phantom gauges. Posted via Mobile Device __________________ Sold the 63 and have a 68 now. 63 SWB C10 LT1/4L60E, PS, PB, Disk Brakes, CPP 4" drop coil rear, 2.5" drop spindle w/ 1" drop coil. slotted rotors, front and rear sway bars. 18"x8" Cragar SS w/ 245/45R18 http://67-72chevytrucks.com/vboard/s...d.php?t=544174

03-24-2013, 04:49 PM	#7239
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: What did you do to your truck today? I managed to purchase a altenator for the 6.2 LSA supercharger set up for the 66 project low and go.....But i can't seem to purchase the bracket I need from ebay ......apparently I am a international customer and they don't roll that way.... __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details

03-24-2013, 05:57 PM	#7240
towersddg9 Registered User Join Date: Dec 2010 Location: Texas Posts: 246	Re: What did you do to your truck today? did the driver side glass and vent window, it was actually an easy job, (thanks to some help from members here) I bought the door glass off ebay it fit great, so did the new vent window (classic parts) Attached Images

03-24-2013, 08:58 PM	#7243
awbrown Registered User Join Date: Aug 2009 Location: Detroit MI Posts: 1,209	Re: What did you do to your truck today? Took it out for a drive ! First drive of the spring !!!

03-24-2013, 09:20 PM	#7244
T Smith Registered User Join Date: Jan 2011 Location: Vicksburg, Mississippi Posts: 567	Re: What did you do to your truck today? Got the rear done last week, worked on the front this weekend..



Register or Log In To remove these advertisements.

03-25-2013, 04:28 PM	#7246
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today? Thanks for sharing that they fit well. I'd like to add those to my truck someday, along with the chrome frames on the side glass. I think they'd upgrade the cab every bit as much as the stainless windshield trim. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

03-25-2013, 07:17 PM	#7248
dantimdad Registered User Join Date: Feb 2010 Location: Hartselle, Al. Posts: 466	Re: What did you do to your truck today? My script valve covers arrived from Don today! Woohoo! They look great. Now, to mod them for a PCV valve and a baffle and then repaint. Steven __________________ “Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla Matt. 6:27 "Who of you by worrying can add a single hour to his life?” http://www.67-72chevytrucks.com/vboa...=507266&page=2

03-25-2013, 07:20 PM	#7249
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: What did you do to your truck today? Glad you like them, but, what no pics? LOL Posted via Mobile Device __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.