Z frames and shaved handles - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lemondrop63 · 08-24-2007, 08:58 AM

Nice truck, we have alot of the same mods. I hope to get mine to lay that low. I'm doing body mods first, then while friends are helping with finishing body work, then I'll work on the frame

L0WRIDE · 11-21-2007, 04:52 AM

finely got started work on the old girl got the rims shooed with 315/35/20s michelins on the back and 275/40/20 on the front here's a couple pics

Stepside65 · 11-21-2007, 07:10 AM

Glad to see your thread comming back to life. Cant wait to see your future progress pics. Btw the rims look great.

harry · 11-21-2007, 07:49 PM

wish mine was that low

Iron-Butt · 11-22-2007, 03:46 PM

looks good.

L0WRIDE · 11-27-2007, 03:13 AM

rolled her out and took some pics what do you guys think

L0WRIDE · 11-27-2007, 03:32 AM

and some more

L0WRIDE · 11-27-2007, 04:08 AM

And More

hewlett2002000 · 11-27-2007, 04:27 AM

that looks bad A$$ man!!! love the back, it has a look of its own and if i may say so... i like it alot!!!!!!!!!!!! Very Good Work!!!
John

Rokcrln · 11-27-2007, 08:37 AM

The truck and all your mods look great! I almost forgot it was a long bed

I just picked up a 63 SWB and when I was looking it over I could not belive how easy the drip rail shave will be. I have done the 67-72's and not alot lines up real well but these trucks it all lines up and leaves you with even better lines. Nice work!

Kevin
LFD Inc.

Srubydo1986 · 11-27-2007, 09:26 PM

yep i got to go save my great grand dads 65 (i think its the same body lines is all i know) short bed fleet sitting in the woods after seeing these

I love that truck been sitting for 20 some years still no boddy rust in it covered by vines and weeds (but no engine or trans)

Dinos63 · 11-27-2007, 09:32 PM

mr lowrider, you built one very bad a-- chevy, the hood,the s/s doors the watts link, the stance.....fender tubs, gas tank .sh-- man nice job

oh and the tail gate very slick

Frizzle Fry · 11-28-2007, 01:59 AM

That's a lot of nice work right there!

L0WRIDE · 11-28-2007, 11:02 PM

thanx guys for your kind words

Slmd92DIME · 12-04-2007, 11:42 PM

Awesome subtle bowtie in the box where the gas filler is.... Took me a few minutes to find it... Your truck is awesome. I have one of my own but not as complete as yours.... AWESOME WORK

Slmd92DIME · 12-05-2007, 10:24 AM

Did your firewall have to be tubbed for the 20s? Were the hood hinges in the way with 20s?

L0WRIDE · 12-05-2007, 01:35 PM

I haven't had to tub the fire wall at all I don't think the factory
would work that well so i took the easy option thanx

Iron-Butt · 12-05-2007, 01:55 PM

Nice work, The truck looks great.

Slmd92DIME · 12-05-2007, 03:05 PM

Did you move your motor forward 3.5 inches?

L0WRIDE · 12-05-2007, 03:12 PM

pass when i got the 65 she had no motor or motor mounts so we made mounts and made the big block fit from momory i think i've got about 1-2'' from the back of the rocker cover to the firewall hope this helps

steveo10 · 12-14-2007, 11:03 AM

your truck is amazing

L0WRIDE · 12-14-2007, 11:52 PM

thanx

slammed1966chevy · 12-15-2007, 01:55 AM

Looks good L0WRIDE, feel bad that i have not been on here in a long time haha

L0WRIDE · 12-15-2007, 10:14 AM

where have you been hiding Matthew ??have you still got your project???

slammed1966chevy · 12-15-2007, 12:37 PM

Quote:

Originally Posted by L0WRIDE

where have you been hiding Matthew ??have you still got your project???

Just been at school doing work . well sad news i dont my girlfreinds dad bought it off of me . But some good news got a 97 gmc tht i am going to bag , but also have a secret project that my dad gave me Jeremy should know what it is its a truck we got from him over the last summer

. Well i will have some teaser pics up tonight you will proberly guess it right iff the bat but ohh well

.

08-24-2007, 08:58 AM	#51
Lemondrop63 Registered User Join Date: Aug 2007 Location: Hamilton, Ohio Posts: 109	Re: Z frames and shaved handles Nice truck, we have alot of the same mods. I hope to get mine to lay that low. I'm doing body mods first, then while friends are helping with finishing body work, then I'll work on the frame __________________ This one time at bandcamp, in my c10, I ran over the girl hiding the flute! http://67-72chevytrucks.com/vboard/s...d.php?t=255141

11-21-2007, 04:52 AM	#52
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Z frames and shaved handles finely got started work on the old girl got the rims shooed with 315/35/20s michelins on the back and 275/40/20 on the front here's a couple pics Attached Images __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

11-21-2007, 07:10 AM	#53
Stepside65 Still Truckless! Join Date: Jul 2007 Location: Valrico, Florida Posts: 3,166	Re: Z frames and shaved handles Glad to see your thread comming back to life. Cant wait to see your future progress pics. Btw the rims look great. __________________ ~James Truckless 2009 Hyundai Sonata<~~Wife's sedanomatic 1997 Nissan Pickup Father-in-law's tonka toy I am forced to drive Founder of The 60-66 Club Tutor Et Ultor

11-21-2007, 07:49 PM	#54
harry Registered User Join Date: Feb 2007 Location: masterton New Zealand Posts: 239	Re: Z frames and shaved handles wish mine was that low

11-22-2007, 03:46 PM	#55
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	Re: Z frames and shaved handles looks good. __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

11-27-2007, 03:13 AM	#56
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Z frames and shaved handles rolled her out and took some pics what do you guys think Attached Images __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

11-27-2007, 03:32 AM	#57
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Z frames and shaved handles and some more Attached Images __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

11-27-2007, 04:08 AM	#58
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Z frames and shaved handles And More Attached Images __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

11-27-2007, 04:27 AM	#59
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: Z frames and shaved handles that looks bad A$$ man!!! love the back, it has a look of its own and if i may say so... i like it alot!!!!!!!!!!!! Very Good Work!!! John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

11-27-2007, 08:37 AM	#60
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Z frames and shaved handles The truck and all your mods look great! I almost forgot it was a long bed I just picked up a 63 SWB and when I was looking it over I could not belive how easy the drip rail shave will be. I have done the 67-72's and not alot lines up real well but these trucks it all lines up and leaves you with even better lines. Nice work! Kevin LFD Inc.

11-27-2007, 09:26 PM	#61
Srubydo1986 The Crazy Machanic Join Date: Jan 2007 Location: Nokesville Va Posts: 1,437	Re: Z frames and shaved handles yep i got to go save my great grand dads 65 (i think its the same body lines is all i know) short bed fleet sitting in the woods after seeing these I love that truck been sitting for 20 some years still no boddy rust in it covered by vines and weeds (but no engine or trans) __________________ 1986 Sliverado longbed 400 small block mean as hell, 700r4 trans (5 speed coming one day) 1970 chevelle 2dr sedan Latest update June 24 2007. 1957 4 door stationwagon - pink all original needing a good restore (body great, floors bad) newest additions 1965 shortbed fleet great granddads. Been told im nuts to bring it back from the dead (still going to happen) plans-all stock with a turbo 292 inline 3 speed column shift. and thats it big block 427 and 5 speed trans and ford 9 inch theyhave no home yet thinking what to put them in and a 79 c60 trash truck um no idea i have one Last edited by Srubydo1986; 11-27-2007 at 09:27 PM.*

11-27-2007, 09:32 PM	#62
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Z frames and shaved handles mr lowrider, you built one very bad a-- chevy, the hood,the s/s doors the watts link, the stance.....fender tubs, gas tank .sh-- man nice job oh and the tail gate very slick Last edited by Dinos63; 11-27-2007 at 09:34 PM.

11-28-2007, 01:59 AM	#63
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Z frames and shaved handles That's a lot of nice work right there!

11-28-2007, 11:02 PM	#64
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Z frames and shaved handles thanx guys for your kind words __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

12-04-2007, 11:42 PM	#65
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: Z frames and shaved handles Awesome subtle bowtie in the box where the gas filler is.... Took me a few minutes to find it... Your truck is awesome. I have one of my own but not as complete as yours.... AWESOME WORK



Register or Log In To remove these advertisements.

12-05-2007, 10:24 AM	#66
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: Z frames and shaved handles Did your firewall have to be tubbed for the 20s? Were the hood hinges in the way with 20s?

12-05-2007, 01:35 PM	#67
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Z frames and shaved handles I haven't had to tub the fire wall at all I don't think the factory would work that well so i took the easy option thanx __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

12-05-2007, 01:55 PM	#68
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	Re: Z frames and shaved handles Nice work, The truck looks great. __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

12-05-2007, 03:05 PM	#69
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: Z frames and shaved handles Did you move your motor forward 3.5 inches?

12-05-2007, 03:12 PM	#70
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Z frames and shaved handles pass when i got the 65 she had no motor or motor mounts so we made mounts and made the big block fit from momory i think i've got about 1-2'' from the back of the rocker cover to the firewall hope this helps __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

12-14-2007, 11:03 AM	#71
steveo10 Registered User Join Date: Jan 2006 Location: central indiana Posts: 128	Re: Z frames and shaved handles your truck is amazing

12-14-2007, 11:52 PM	#72
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Z frames and shaved handles thanx __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

12-15-2007, 01:55 AM	#73
slammed1966chevy Registered User Join Date: Jan 2007 Location: Bentonville / Arkansas Posts: 226	Re: Z frames and shaved handles Looks good L0WRIDE, feel bad that i have not been on here in a long time haha

12-15-2007, 10:14 AM	#74
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: Z frames and shaved handles where have you been hiding Matthew ??have you still got your project??? __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.