89,86burb & 84blazer for parts - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

alf4444 · 08-08-2006, 11:07 PM

I'll pass I have a deal pending with another member

**BOSS** · 08-10-2006, 02:03 PM

here is some dash pics.let me know if you still want it.And guys if i am to high on prices you can allways offer less and see if i take it..lol.

Eyegore · 08-10-2006, 02:14 PM

Boss i'm looking for the wiring harness for the power windows from the fuse box to the doors -motor to switches and switches, do you have this? It will be for my 86 c10. Also what about the power door locks, do yuo have them also?

**BOSS** · 08-10-2006, 02:34 PM

Eyegore on the 86 i know the windows worked but they were very slow in the front,back seemed to work good and the locks didnt work.I think everything works in the 89 but i am not sure they are the same.

Eyegore · 08-10-2006, 03:34 PM

I don't need the motors or window regulators just the wiring harness for the power windows & door locks, I'm installing power windows and door locks, I already have the motors and requlators but now I need the wiring harness and I would like to install power locks.

**BOSS** · 08-10-2006, 03:53 PM

How about $20 for the wiring and the switches and i will check out both and see which one is in better shape?Plus shipping which shouldnt be much?

Eyegore · 08-10-2006, 04:03 PM

Great, what about the power door locks?

**BOSS** · 08-10-2006, 04:07 PM

how about another $5 for the wiring and switches for those?seeing they would be in the same box.

Eyegore · 08-10-2006, 04:11 PM

Great that will do, can I PM you for specifics?

**BOSS** · 08-10-2006, 04:12 PM

sure

rich-white · 08-11-2006, 10:11 PM

Boss; Do you still have the 4" lift and does it have the steering arm? Would be interested w/o rear springs just blocks and u-bolts and complete front end lift componets.

**BOSS** · 08-12-2006, 04:16 PM

rich-white = it doesnt have a lowered steering arm on it.let me know if you would still be interested ok.

rich-white · 08-12-2006, 07:32 PM

Still interested.. see if it has the the raised steering that goes on the axle usually used on 4" and over kits. Looks like a horseshoe just bent.

rich-white · 08-12-2006, 07:34 PM

or if you have a pic of the axle where the rear of the drag lik mounts would be good too.

wildmanaaron · 08-13-2006, 11:35 PM

Can you tell me if you have any 81-91 Silverado style door panels. Also looking for a set of the factory kickpanels for A/C Trucks.

What all do you have left from the Blazer?? Pics would be appreciated of it.

Thanks!

**BOSS** · 08-14-2006, 07:51 AM

I will try to get more pics taken today.really dont want to split up the lift though

08-08-2006, 11:07 PM	#51
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Re: 89,86burb & 84blazer for parts I'll pass I have a deal pending with another member __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

08-10-2006, 02:03 PM	#52
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Re: 89,86burb & 84blazer for parts here is some dash pics.let me know if you still want it.And guys if i am to high on prices you can allways offer less and see if i take it..lol. Attached Images __________________ Support our site Norwood Survivor

08-10-2006, 02:14 PM	#53
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	Re: 89,86burb & 84blazer for parts Boss i'm looking for the wiring harness for the power windows from the fuse box to the doors -motor to switches and switches, do you have this? It will be for my 86 c10. Also what about the power door locks, do yuo have them also? __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454

08-10-2006, 02:34 PM	#54
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Re: 89,86burb & 84blazer for parts Eyegore on the 86 i know the windows worked but they were very slow in the front,back seemed to work good and the locks didnt work.I think everything works in the 89 but i am not sure they are the same. __________________ Support our site Norwood Survivor

08-10-2006, 03:34 PM	#55
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	Re: 89,86burb & 84blazer for parts I don't need the motors or window regulators just the wiring harness for the power windows & door locks, I'm installing power windows and door locks, I already have the motors and requlators but now I need the wiring harness and I would like to install power locks. __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454

08-10-2006, 03:53 PM	#56
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Re: 89,86burb & 84blazer for parts How about $20 for the wiring and the switches and i will check out both and see which one is in better shape?Plus shipping which shouldnt be much? __________________ Support our site Norwood Survivor

08-10-2006, 04:03 PM	#57
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	Re: 89,86burb & 84blazer for parts Great, what about the power door locks? __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454

08-10-2006, 04:07 PM	#58
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Re: 89,86burb & 84blazer for parts how about another $5 for the wiring and switches for those?seeing they would be in the same box. __________________ Support our site Norwood Survivor

08-10-2006, 04:11 PM	#59
Eyegore What Hump? Join Date: Apr 2003 Location: New River AZ Posts: 2,009	Re: 89,86burb & 84blazer for parts Great that will do, can I PM you for specifics? __________________ Lil red 86 c-10 99 Sub 78 Camper Special w/ 454

08-10-2006, 04:12 PM	#60
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Re: 89,86burb & 84blazer for parts sure __________________ Support our site Norwood Survivor

08-11-2006, 10:11 PM	#61
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	Re: 89,86burb & 84blazer for parts Boss; Do you still have the 4" lift and does it have the steering arm? Would be interested w/o rear springs just blocks and u-bolts and complete front end lift componets.

08-12-2006, 04:16 PM	#62
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Re: 89,86burb & 84blazer for parts rich-white = it doesnt have a lowered steering arm on it.let me know if you would still be interested ok. __________________ Support our site Norwood Survivor

08-12-2006, 07:32 PM	#63
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	Re: 89,86burb & 84blazer for parts Still interested.. see if it has the the raised steering that goes on the axle usually used on 4" and over kits. Looks like a horseshoe just bent.

08-12-2006, 07:34 PM	#64
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	Re: 89,86burb & 84blazer for parts or if you have a pic of the axle where the rear of the drag lik mounts would be good too.

08-13-2006, 11:35 PM	#65
wildmanaaron Registered User Join Date: Mar 2002 Location: Bowling Green, KY Posts: 396	Re: 89,86burb & 84blazer for parts Can you tell me if you have any 81-91 Silverado style door panels. Also looking for a set of the factory kickpanels for A/C Trucks. What all do you have left from the Blazer?? Pics would be appreciated of it. Thanks!



Register or Log In To remove these advertisements.

08-14-2006, 07:51 AM	#66
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Re: 89,86burb & 84blazer for parts I will try to get more pics taken today.really dont want to split up the lift though __________________ Support our site Norwood Survivor

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.