68 GMC for parts - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 04-15-2008, 03:10 PM

For some reason the 67-68 gmc trucks seldom came with spid labels. I have seen more with out them then with...
Let me know if i can paypal for those parts. Thanks.

otsenre · 04-16-2008, 05:27 PM

Yes, I will sell bed panels separtely, will have to be picked up. They look real nice and straight. Nobody has inquired about the cab, I am tellong you guys, its a nice 99% rust free cab, only rust I see is a little on left rocker

Ace in the hole · 04-16-2008, 05:42 PM

how's the wing windows? I'm looking for a nice chrome set

jkaylor68gmc · 04-16-2008, 06:30 PM

I would be interested in the wheel

otsenre · 04-16-2008, 08:16 PM

Aceinthehole-there is some pitting on them 40.00 shipped
jktaylor-couple of cracks not bad,50.00 shipped

67ChevyRedneck · 04-16-2008, 09:46 PM

Interested in the bronze tailgate if the others pass...

Is it as straight as it looks in the pics? Any rust holes or dent damage? Does it say "chevrolet" under the tailgate band?

faribran · 04-17-2008, 12:04 AM

did you sell the side trim?.. if not.. how much to 36345?
thanks

otsenre · 04-17-2008, 09:06 AM

67redneck-taigate has been sold
faribran-I have not heard from glimmertom, I will give him a couple more days to decide, if not, I think someone else inquird about it, I will need to go back and see, 100.00 shipped

toomanytoyz · 04-17-2008, 09:08 AM

Quote:

Originally Posted by otsenre

67redneck-taigate has been sold
faribran-I have not heard from glimmertom, I will give him a couple more days to decide, if not, I think someone else inquird about it, I will need to go back and see, 100.00 shipped

That was Me...............

Rick

otsenre · 04-17-2008, 04:50 PM

Quote:

Originally Posted by toomanytoyz

That was Me...............

Rick

glimmertwin passed, so you are up, I will remove and send pics!

toomanytoyz · 04-17-2008, 05:07 PM

Quote:

Originally Posted by otsenre

glimmertwin passed, so you are up, I will remove and send pics!

Looking Forward to the Pics............

Rick

kyull67 · 04-17-2008, 06:25 PM

Would you be willing to sell the parking brake hardware? I need the parts circled in the diagram.

67ChevyRedneck · 04-17-2008, 03:19 PM

Quote:

Originally Posted by otsenre

67redneck-taigate has been sold

Ok, thanks

faribran · 04-17-2008, 02:16 PM

ok... i will wait in line... thanks

tommypic · 04-17-2008, 02:23 PM

how much for the complete power brake booster setup to 29673 ?

otsenre · 04-17-2008, 04:58 PM

Quote:

Originally Posted by tommypic

how much for the complete power brake booster setup to 29673 ?

I will ship for 65.00, works good!

glimmertwin01 · 04-18-2008, 03:32 AM

good luck to who ever gets the trim I decided to keep my 67 the Base trim level .... i dont want to bash the trim or dent it when im off roading...

shaneo2112RUSH · 04-18-2008, 06:11 AM

looking for a pair of doors that are in decesnt shape!! wondering if you still have a set? no need for shipping!!! im in Pueblo, CO

also if you have any fendersfor sale and in good shape

thanks Shane V

shaneo2112RUSH · 04-18-2008, 06:30 AM

are you selling the cab on the white truck?? If so how much !!!

otsenre · 04-18-2008, 08:35 AM

Quote:

Originally Posted by shaneo2112RUSH

looking for a pair of doors that are in decesnt shape!! wondering if you still have a set? no need for shipping!!! im in Pueblo, CO

also if you have any fendersfor sale and in good shape

thanks Shane V

The doors on this pickup have a little rust at bottom, I will be picking up another pair on Friday out of a 70 chevy, pm me then and I will send pics, yes this cab is for sale, it is nice and straight, 99% rust free only rust I can see is on left rocker, I have a rocker panel here that will go with it, hurry up because I am parting it out little by little, 400.00 with everything I still have not sold!

ansleys72 · 04-18-2008, 04:54 PM

Do you have the keys w/lIgnition Switch and doors:IF SO
hOW much shop to 30656: also looking good engine wire harness......

otsenre · 04-18-2008, 05:19 PM

Quote:

Originally Posted by ansleys72

Do you have the keys w/lIgnition Switch and doors:IF SO
hOW much shop to 30656: also looking good engine wire harness......

I do, how about 50 shipped, ignition switch w/keys, engine harness, and do you mean the door locks or complete doors? If just the door locks its at that price.

gregz69 · 04-18-2008, 05:41 PM

I am interested in the vent windows looking for a set of chrome ones thanks

otsenre · 04-18-2008, 05:54 PM

Quote:

Originally Posted by gregz69

I am interested in the vent windows looking for a set of chrome ones thanks

These have some pitting, but still look nice, maybe i can take a closeup pic,to show the pitting, 40.00 shipped

otsenre · 04-20-2008, 02:31 AM

Update on what is left on this pickup- Cab is sold, all that is left is a nice solid rolling chassis, W/power steering, and the bed. Bed panels are nice and straight, i WILL SELL SEPARATLY, Frame is nice and original, no rust. I still need to remove trim as there is someone interested in it.

04-15-2008, 03:10 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,815	Re: 68 GMC for parts For some reason the 67-68 gmc trucks seldom came with spid labels. I have seen more with out them then with... Let me know if i can paypal for those parts. Thanks. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-16-2008, 05:27 PM	#2
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: 68 GMC for parts Yes, I will sell bed panels separtely, will have to be picked up. They look real nice and straight. Nobody has inquired about the cab, I am tellong you guys, its a nice 99% rust free cab, only rust I see is a little on left rocker

04-16-2008, 05:42 PM	#3
Ace in the hole Registered User Join Date: Apr 2007 Location: Kalamazoo, Michigan, USA Posts: 538	Re: 68 GMC for parts how's the wing windows? I'm looking for a nice chrome set __________________ 1970 K20, 350--- SOLD 05 silverado extended cab short box- duramax Jeep wrangler unlimited

04-16-2008, 06:30 PM	#4
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: 68 GMC for parts I would be interested in the wheel __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride

04-16-2008, 08:16 PM	#5
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: 68 GMC for parts Aceinthehole-there is some pitting on them 40.00 shipped jktaylor-couple of cracks not bad,50.00 shipped Last edited by otsenre; 04-16-2008 at 08:16 PM.

04-16-2008, 09:46 PM	#6
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 68 GMC for parts Interested in the bronze tailgate if the others pass... Is it as straight as it looks in the pics? Any rust holes or dent damage? Does it say "chevrolet" under the tailgate band? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 04-16-2008 at 09:48 PM.

04-17-2008, 12:04 AM	#7
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: 68 GMC for parts did you sell the side trim?.. if not.. how much to 36345? thanks __________________ "

04-17-2008, 09:06 AM	#8
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: 68 GMC for parts 67redneck-taigate has been sold faribran-I have not heard from glimmertom, I will give him a couple more days to decide, if not, I think someone else inquird about it, I will need to go back and see, 100.00 shipped

04-17-2008, 06:25 PM	#12
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: 68 GMC for parts Would you be willing to sell the parking brake hardware? I need the parts circled in the diagram. Attached Images __________________ The first '67 The current '67 '63 Biscayne

04-17-2008, 02:16 PM	#14
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: 68 GMC for parts ok... i will wait in line... thanks __________________ "

04-17-2008, 02:23 PM	#15
tommypic Registered User Join Date: Jan 2008 Location: Piedmont , SC Posts: 728	Re: 68 GMC for parts how much for the complete power brake booster setup to 29673 ? __________________ My ZipCode = 29673 2008 Silverado Z71 LTZ Wrecked New Ride SOLD 71-72 Custom A/C Parts Truck < selling parts 67 Chevy ShortStep SOLD 67 GMC SWB Step <-- For Sell 67 Chevy SWB Step <-- working on 2000 Road King <-- SOLD 97 F150 my ride for now 2006 Escape wifes ride HELP SUPPORT THE BOARD http://67-72chevytrucks.com/vboard/payments.php Great How To Thread http://67-72chevytrucks.com/vboard/s...d.php?t=157669 Vendor Sites http://67-72chevytrucks.com/links/browselinks.php?c=2

04-18-2008, 03:32 AM	#17
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: 68 GMC for parts good luck to who ever gets the trim I decided to keep my 67 the Base trim level .... i dont want to bash the trim or dent it when im off roading... __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

04-18-2008, 06:11 AM	#18
shaneo2112RUSH Junior Member Join Date: Jun 2006 Location: Pueblo,Colo Posts: 424	Re: 68 GMC for parts looking for a pair of doors that are in decesnt shape!! wondering if you still have a set? no need for shipping!!! im in Pueblo, CO also if you have any fendersfor sale and in good shape thanks Shane V __________________ 1968 LWB C10 "Project LADY EYE SORE" (She is my baby and sent me to the hospital 3 times for eye injuries lol) who said love hurts??

04-18-2008, 06:30 AM	#19
shaneo2112RUSH Junior Member Join Date: Jun 2006 Location: Pueblo,Colo Posts: 424	Re: 68 GMC for parts are you selling the cab on the white truck?? If so how much !!! __________________ 1968 LWB C10 "Project LADY EYE SORE" (She is my baby and sent me to the hospital 3 times for eye injuries lol) who said love hurts??

04-18-2008, 04:54 PM	#21
ansleys72 Registered User Join Date: Apr 2007 Location: Monroe,GA Posts: 17	Re: 68 GMC for parts Do you have the keys w/lIgnition Switch and doors:IF SO hOW much shop to 30656: also looking good engine wire harness......



Register or Log In To remove these advertisements.

04-18-2008, 05:41 PM	#23
gregz69 Registered User Join Date: Jul 2007 Location: Patterson California Posts: 6	Re: 68 GMC for parts I am interested in the vent windows looking for a set of chrome ones thanks

04-20-2008, 02:31 AM	#25
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: 68 GMC for parts Update on what is left on this pickup- Cab is sold, all that is left is a nice solid rolling chassis, W/power steering, and the bed. Bed panels are nice and straight, i WILL SELL SEPARATLY, Frame is nice and original, no rust. I still need to remove trim as there is someone interested in it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.