|
|
|
10-31-2008, 02:33 AM
|
#1 |
|
Registered User
Join Date: Jun 2007
Location: oregon
Posts: 1,069
|
Re: frame swap for a 4x4
okay, I'll measure my 69 K-20.
The reason I ask is if there is /was a diff between the 3/4 or the 1/2 K trucks. and a diff between those to the 2wd same trucks
__________________
69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears: 
|
|
|
|
11-03-2008, 07:47 PM
|
#2 |
|
Registered User
 
Join Date: Apr 2008
Location: river falls, Wisconsin
Posts: 236
|
Re: frame swap for a 4x4
ok so sorry it took me a few days but the frame and my 71 3/4 4x4 is 6" from top to bottom of the rail all the way under the cab. hope that helps
|
|
|
|
|
11-03-2008, 10:55 PM
|
#3 |
|
Registered User
Join Date: Jun 2007
Location: oregon
Posts: 1,069
|
Re: frame swap for a 4x4
I will be off this Friday and can go measure then it is dark before and after work and raining right now.......................seems like the 69 K-20 I have is also 6 inches if i was to guess.
__________________
69 K-20 cloned to a 67 with front clip and some other stuff. 383 .040 over Crane roller cam lifters and rockers ,1.6 intake ratio, Open chamber heads, 9.5-1 compression ratio, 2.02 intake valves , Edelbrock performer Air Gap manifold Carter AFB performer 750cfm, MSD ignition, SM465 NP205 4.10 gears:
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
