Jack instructions decal-blazer - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

budder71 · 02-20-2010, 11:27 AM

that is a great one !!!!!!!!!! Trevor and BigDon do you think that one is
good enough to get the party started ?

**71blksuper4x4** · 02-20-2010, 02:05 PM

Maybe, though I need someone to start taking measurements of their existing decal. I need a picture of 2 rulers or tape measures on length, and width of their decal. The only way to sell these things is if they are accurate, so I need help from you guys on taking pics of existing decals and getting measurements of areas on it. Trevor

**bigdon-70blazer** · 02-20-2010, 10:48 PM

Come on there has to have someone out there who has enough of this to get a pic with a ruler and the decal. Please help!

**bigdon-70blazer** · 02-20-2010, 10:50 PM

Quote:

Originally Posted by lolife99

Don,... this won't be much help.
But if you do get them reproduced,... I will purchase a couple of them.

This is my original sticker in my '71 blazer,...

Please take some pics with rulers as requested, there appears to be enough to get some accurate dimentions.

**bigdon-70blazer** · 02-22-2010, 07:49 AM

any more pics out there? This decal is truly rare indeed!

**Thealien** · 02-22-2010, 08:24 AM

Just a guess but I bet the truck jack sticker is the same size/layout as the blazer one and might help producing the repop?

**bigdon-70blazer** · 02-22-2010, 12:08 PM

Quote:

Originally Posted by Thealien

Just a guess but I bet the truck jack sticker is the same size/layout as the blazer one and might help producing the repop?

That is exactly my thought. Trevor, do you think you could get started if I send you the truck one for size comparison?

**bigdon-70blazer** · 02-25-2010, 07:40 AM

How are we doing? Any luck?

**71blksuper4x4** · 02-25-2010, 12:15 PM

I suppose I could, but I will need measurements off of the correct one to see where things go and measure up. That's the main issue, in order to get things somewhat correct we need shots of measurements. Trevor

**bigdon-70blazer** · 02-27-2010, 01:00 AM

Still need pics with ruler in the picture...

1949gmc · 03-02-2010, 12:41 AM

BigDon-

Here's probably the best decal you're gonna find.... see if the man who owns it will measure it for you.

Name: 8200 mile jimmy.jpg
Views: 375
Size: 49.2 KB

Name: 8200 mile jimmy.jpg
Views: 375
Size: 49.2 KB

http://cgi.ebay.com/ebaymotors/GMC-J...fCarsQ5fTrucks

**Yukon Jack** · 03-02-2010, 11:11 AM

That's an incredible K5!

**Gary 70 Jimmy** · 03-02-2010, 11:18 AM

That jimmy was on ebay before and didnt make the reserve.

John H. · 03-02-2010, 11:25 AM

Sold for around 12K in 2005. It was around Xmas so very cold in MN. I called the original owners brother in law who had it listed, but he did not know much about it and the pictures were terrible so you could see how good or bad it was and I passed. At that point it was in Minneapolis (which is why I was concerned) and the winning bidder in SanDiego bought it and made it road worthy. If I remember correctly, he did not save all the original parts that were replaced.

I have also spoke to the guy who has it now. Seemed like a great guy so might help.

**bigdon-70blazer** · 03-02-2010, 06:54 PM

I called the guy who is the contact person for now, don't know if he is the owner but super nice guy. Sent me pics of this decal and it is PRISTINE, no discoloration, small corner gone but very useable for what we are trying to do. The pics however are blurry and basically unuseable for us for what we are doing. I think with the right pics, we could cut and paste most of the parts of it without problems. I replied to him almost begging him to send better pics, hopefully he will before it gets sold.

John H. · 03-02-2010, 07:20 PM

Don,

If you can have him take a high resolution shot (highest he can), and have him send it on a disc? I am sure you or somebody could compensate him for his trouble.

1949gmc · 03-02-2010, 07:25 PM

Do we have any members here that might be close to that truck? I'm 190 miles away, but would love to see it in person.

**Classic Heartbeat** · 03-02-2010, 07:58 PM

What is the part number? I can't read it on the pictures provided. I can try to locate one with that. WES

**bigdon-70blazer** · 03-03-2010, 03:15 PM

I cannot read that, anyone?

1949gmc · 03-03-2010, 03:18 PM

First three digits are definitely 395, last four look like 3208??? Am I close?

Huck · 03-03-2010, 08:43 PM

It is 6" wide by 3.5" high. I have a picture of one but the photo has the "date" blocking the part number. Luvtxlr8 used to have some good pictures of the Blazer Jack instruction but it was darkened on the right side. Eventually someone will come up with a really good NOS one~~~. Huck

**bigdon-70blazer** · 03-03-2010, 10:39 PM

Does anybody know exactly where that Jimmy is located?

**bigdon-70blazer** · 03-03-2010, 10:49 PM

Never mind, almost in Northern Illinois. And he sold it! I will try to call him tomorrow to see if we can get better pics or new owner name or something!

**bigdon-70blazer** · 03-04-2010, 05:59 PM

That Jimmy is gone. The po is going to try to get a number to him but we may have lost that decal...Did anyone on this board get that fine ride?

goldgmc · 03-05-2010, 04:34 PM

Quote:

Originally Posted by Classic Heartbeat

What is the part number? I can't read it on the pictures provided. I can try to locate one with that. WES

On the one I posted on page 2, it has the date (1-6-69) and the part # looks to be 3967309.

02-20-2010, 11:27 AM	#51
budder71 Registered User Join Date: Jul 2009 Location: Hattiesburg Mississippi Posts: 697	Re: Jack instructions decal-blazer that is a great one !!!!!!!!!! Trevor and BigDon do you think that one is good enough to get the party started ?

02-20-2010, 02:05 PM	#52
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Jack instructions decal-blazer Maybe, though I need someone to start taking measurements of their existing decal. I need a picture of 2 rulers or tape measures on length, and width of their decal. The only way to sell these things is if they are accurate, so I need help from you guys on taking pics of existing decals and getting measurements of areas on it. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

02-20-2010, 10:48 PM	#53
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: Jack instructions decal-blazer Come on there has to have someone out there who has enough of this to get a pic with a ruler and the decal. Please help!

02-22-2010, 07:49 AM	#55
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: Jack instructions decal-blazer any more pics out there? This decal is truly rare indeed!

02-22-2010, 08:24 AM	#56
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: Jack instructions decal-blazer Just a guess but I bet the truck jack sticker is the same size/layout as the blazer one and might help producing the repop? __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

02-25-2010, 07:40 AM	#58
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: Jack instructions decal-blazer How are we doing? Any luck?

02-25-2010, 12:15 PM	#59
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Jack instructions decal-blazer I suppose I could, but I will need measurements off of the correct one to see where things go and measure up. That's the main issue, in order to get things somewhat correct we need shots of measurements. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

02-27-2010, 01:00 AM	#60
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: Jack instructions decal-blazer Still need pics with ruler in the picture...

03-02-2010, 12:41 AM	#61
1949gmc Registered User Join Date: Nov 2004 Location: Lindenhurst, IL Posts: 659	Re: Jack instructions decal-blazer BigDon- Here's probably the best decal you're gonna find.... see if the man who owns it will measure it for you. http://cgi.ebay.com/ebaymotors/GMC-J...fCarsQ5fTrucks

03-02-2010, 11:11 AM	#62
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Jack instructions decal-blazer That's an incredible K5! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

03-02-2010, 11:18 AM	#63
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: Jack instructions decal-blazer That jimmy was on ebay before and didnt make the reserve. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

03-02-2010, 11:25 AM	#64
John H. Registered User Join Date: Oct 2007 Location: Sammamish, WA Posts: 2,115	Re: Jack instructions decal-blazer Sold for around 12K in 2005. It was around Xmas so very cold in MN. I called the original owners brother in law who had it listed, but he did not know much about it and the pictures were terrible so you could see how good or bad it was and I passed. At that point it was in Minneapolis (which is why I was concerned) and the winning bidder in SanDiego bought it and made it road worthy. If I remember correctly, he did not save all the original parts that were replaced. I have also spoke to the guy who has it now. Seemed like a great guy so might help.

03-02-2010, 06:54 PM	#65
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: Jack instructions decal-blazer I called the guy who is the contact person for now, don't know if he is the owner but super nice guy. Sent me pics of this decal and it is PRISTINE, no discoloration, small corner gone but very useable for what we are trying to do. The pics however are blurry and basically unuseable for us for what we are doing. I think with the right pics, we could cut and paste most of the parts of it without problems. I replied to him almost begging him to send better pics, hopefully he will before it gets sold.

03-02-2010, 07:20 PM	#66
John H. Registered User Join Date: Oct 2007 Location: Sammamish, WA Posts: 2,115	Re: Jack instructions decal-blazer Don, If you can have him take a high resolution shot (highest he can), and have him send it on a disc? I am sure you or somebody could compensate him for his trouble.

03-02-2010, 07:25 PM	#67
1949gmc Registered User Join Date: Nov 2004 Location: Lindenhurst, IL Posts: 659	Re: Jack instructions decal-blazer Do we have any members here that might be close to that truck? I'm 190 miles away, but would love to see it in person.



Register or Log In To remove these advertisements.

03-02-2010, 07:58 PM	#68
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Jack instructions decal-blazer What is the part number? I can't read it on the pictures provided. I can try to locate one with that. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

03-03-2010, 03:15 PM	#69
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: Jack instructions decal-blazer I cannot read that, anyone?

03-03-2010, 03:18 PM	#70
1949gmc Registered User Join Date: Nov 2004 Location: Lindenhurst, IL Posts: 659	Re: Jack instructions decal-blazer First three digits are definitely 395, last four look like 3208??? Am I close?

03-03-2010, 08:43 PM	#71
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Re: Jack instructions decal-blazer It is 6" wide by 3.5" high. I have a picture of one but the photo has the "date" blocking the part number. Luvtxlr8 used to have some good pictures of the Blazer Jack instruction but it was darkened on the right side. Eventually someone will come up with a really good NOS one~~~. Huck

03-03-2010, 10:39 PM	#72
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: Jack instructions decal-blazer Does anybody know exactly where that Jimmy is located?

03-03-2010, 10:49 PM	#73
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: Jack instructions decal-blazer Never mind, almost in Northern Illinois. And he sold it! I will try to call him tomorrow to see if we can get better pics or new owner name or something!

03-04-2010, 05:59 PM	#74
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: Jack instructions decal-blazer That Jimmy is gone. The po is going to try to get a number to him but we may have lost that decal...Did anyone on this board get that fine ride?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.