here's my truck 65 c20 - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Budman56 · 11-28-2011, 12:04 PM

And more photos

Budman56 · 11-28-2011, 12:06 PM

& more photos because i know you all love photos.

Budman56 · 11-28-2011, 12:10 PM

Got a question for you all, i was hooking up my wire harness and ran into a problem i have more wires to my started than i know what they are for. Can anyone tell me where they all go. Here are more photos of the starter and wire loom. I DONT KNOW WHERE TO PUT THE PURPLE WIRE OR EVEN IF THE OTHERS ARE WIRED RIGHT. ANY HELP????

**Clyde65** · 11-28-2011, 12:18 PM

I got this by gooogling it,

the wire from ignition switch for the solenoid goes to the small stud with S by it.
almost always purple color on most GM

all other wires go to the battery cable stud ( this should have the alt wire running to it also.)

if you have old points type ignition then you need to use the other small stud it is labeled R

run a small wire from it to the ign coil + stud. if you dont then it will not run because this is the full 12v feed to the points during cranking time only

here is a wire harness diagram for you also

LostMy65 · 11-28-2011, 01:28 PM

Quote:

Originally Posted by Budman56

And more photos

Looking really good.
I'm glad to see more guys sticking with the 3/4 ton and still making it look cool.
Great work!

ChevyTruckGuy · 11-29-2011, 01:01 AM

Nice work

doobiebro · 11-29-2011, 07:16 PM

Quote:

Originally Posted by Budman56

Got a question for you all, i was hooking up my wire harness and ran into a problem i have more wires to my started than i know what they are for. Can anyone tell me where they all go. Here are more photos of the starter and wire loom. I DONT KNOW WHERE TO PUT THE PURPLE WIRE OR EVEN IF THE OTHERS ARE WIRED RIGHT. ANY HELP????

Budman56 did you buy aftermarket wiring harness for your truck? Looks like the same set up on mine and maybe I can help?

Chvyman1975 · 12-01-2011, 11:53 PM

Quote:

Originally Posted by Budman56

& more photos because i know you all love photos.

That guy in the pictures looks familiar. I wonder who he is....lol!

Surfdaddy · 12-02-2011, 11:32 PM

Wow, the engine compartment looks really clean. The fender wells look so clean and perfect. Very nice.

Budman56 · 12-03-2011, 11:16 AM

Quote:

Originally Posted by Surfdaddy

Wow, the engine compartment looks really clean. The fender wells look so clean and perfect. Very nice.

For now they clean, can't wait top get them dirty.
Posted via Mobile Device

Rich 5150 69 · 12-04-2011, 12:45 PM

looks good Budman...by the way do you have a stock number for the upper rad hose, the current ones we are using `64 to `72 are getting hard to find.[IMG]

[/IMG]

Budman56 · 12-26-2011, 03:45 PM

So here is what I think might be the build ticket for my truck, until I noticed that the vehicle identification numbers didn't match the ticket says 01546z my truck cab number says 02546z so the question that started all of this. Did my 65 c20 come with a V8 327?. I'm being told that this truck didn't have that option. Can any help with this? My ticket our what I think is my build ticket says the engine is a SV?
Posted via Mobile Device what ifs a SV?
Posted via Mobile Device

Budman56 · 12-26-2011, 04:28 PM

Quote:

Originally Posted by Rich 5150 69

looks good Budman...by the way do you have a stock number for the upper rad hose, the current ones we are using `64 to `72 are getting hard to find.[IMG]

[/IMG]

Sorry I don't know what the part number is I got it at the truck shop.
Posted via Mobile Device

smokeater05 · 01-23-2012, 01:29 PM

I love the truck! I wish I could build one one like that one day. I saw in the posts someone ask about the 90 axle being wide. Do the wheels stick out or is the axle about the same width?

Budman56 · 01-24-2012, 11:56 AM

Quote:

Originally Posted by smokeater05

I love the truck! I wish I could build one one like that one day. I saw in the posts someone ask about the 90 axle being wide. Do the wheels stick out or is the axle about the same width?

i got lucky the axle was the same width as the stock one that came with the truck 65" outside hub to hub.

Budman56 · 02-25-2012, 10:44 AM

Well while looking through craigs list yesterday i found a new project, i just couldnt pass up. It was almost free, $275.00 with brand new tires, wheels, and a freshly rebuilt steering column. With rust free doors.

**ChiefRocka** · 02-25-2012, 10:58 AM

Nice build !!

Did you get the starter wiring ?

LostMy65 · 02-25-2012, 11:33 AM

Wow! Nice find, budman.
Posted via Mobile Device

Budman56 · 07-07-2012, 04:55 PM

Quote:

Originally Posted by ChiefRocka

Nice build !!

Did you get the starter wiring ?

Yes I finally figured the starter wiring out. But had to put my project on hold for awhile. While I look for a new job. The company I was working for closed its doors.
Posted via Mobile Device

**70cst** · 07-07-2012, 05:34 PM

Lookin great

**HeloCrewChief** · 07-07-2012, 06:05 PM

Sweet project. My family had a house in Temecula for a while. Do you mind me asking where you got your cab sand blasted and primered and how much it set you back? THanks

Budman56 · 07-07-2012, 06:38 PM

Quote:

Originally Posted by HeloCrewChief

Sweet project. My family had a house in Temecula for a while. Do you mind me asking where you got your cab sand blasted and primered and how much it set you back? THanks

$200.00 bones for the blasting of the cab. And another $150.00 in paint. I painted it me self.
Posted via Mobile Device

**HeloCrewChief** · 07-07-2012, 06:41 PM

Glad I asked. Was getting quoted $500-$700. Where did you get it done at?

luvbowties · 09-17-2012, 10:17 AM

Quote:

Originally Posted by Budman56

Yep didn't need to be there, but I don't like removing things that could be structural and there was no clearance issue with leaving it. but I did grind the rivets and replace with bolts so it could be removed easly.

Posted via Mobile Device

sry

**GMCNUT** · 03-23-2013, 10:52 PM

Man, I hope I am crazy but it looks like the intake has nowhere to put the oil fill tube and the valve covers do not have breather caps so where the heck do you pour in the oil?

11-28-2011, 12:04 PM	#51
Budman56 Registered User Join Date: Aug 2011 Location: Patterson California Posts: 1,133	Re: here's my truck 65 c20 And more photos Attached Images __________________ MY 65 C20 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=483346 ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/

11-28-2011, 12:06 PM	#52
Budman56 Registered User Join Date: Aug 2011 Location: Patterson California Posts: 1,133	Re: here's my truck 65 c20 & more photos because i know you all love photos. Attached Images __________________ MY 65 C20 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=483346 ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/

11-28-2011, 12:10 PM	#53
Budman56 Registered User Join Date: Aug 2011 Location: Patterson California Posts: 1,133	Re: here's my truck 65 c20 Got a question for you all, i was hooking up my wire harness and ran into a problem i have more wires to my started than i know what they are for. Can anyone tell me where they all go. Here are more photos of the starter and wire loom. I DONT KNOW WHERE TO PUT THE PURPLE WIRE OR EVEN IF THE OTHERS ARE WIRED RIGHT. ANY HELP???? Attached Images __________________ MY 65 C20 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=483346 ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/

11-29-2011, 01:01 AM	#56
ChevyTruckGuy Registered User Join Date: Feb 2011 Location: Hesperia, Ca ( Southern California ) Posts: 184	Re: here's my truck 65 c20 Nice work __________________ 1966 Chevy C 20 Lwb (Now a project)5.7 400hp 1996 Chevy Silverado Reg Cab Lwb (Daily Driver) 5.7 2000 Chevy S-10 Ex Cab Lowered 4/4 4.3 (For Fun) 2008 GMC Sierra Ex Cab 5.3 (once a month driver) Wife's 74 Ranchero 500 351 Cleveland (One Owner) My name is Mike and im in So. Cal (Hi Desert)

12-02-2011, 11:32 PM	#59
Surfdaddy Registered User Join Date: Jan 2011 Location: Newhall Ca. Posts: 463	Re: here's my truck 65 c20 Wow, the engine compartment looks really clean. The fender wells look so clean and perfect. Very nice. __________________ 1961 GMC. Start date 1/20/2011 Past projects: 1958 Fleetliner 14ft Runabout 1966 Caprice 2dr 1970 VW Squareback

12-04-2011, 12:45 PM	#61
Rich 5150 69 Registered User Join Date: Nov 2009 Location: Galt, Calif Posts: 2,437	Re: here's my truck 65 c20 looks good Budman...by the way do you have a stock number for the upper rad hose, the current ones we are using `64 to `72 are getting hard to find.[IMG][/IMG] __________________ `64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip

12-26-2011, 03:45 PM	#62
Budman56 Registered User Join Date: Aug 2011 Location: Patterson California Posts: 1,133	Re: here's my truck 65 c20 So here is what I think might be the build ticket for my truck, until I noticed that the vehicle identification numbers didn't match the ticket says 01546z my truck cab number says 02546z so the question that started all of this. Did my 65 c20 come with a V8 327?. I'm being told that this truck didn't have that option. Can any help with this? My ticket our what I think is my build ticket says the engine is a SV? Posted via Mobile Device what ifs a SV? Posted via Mobile Device __________________ MY 65 C20 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=483346 ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/

01-23-2012, 01:29 PM	#64
smokeater05 Registered User Join Date: Nov 2010 Location: Williamson, Ga Posts: 42	Axle I love the truck! I wish I could build one one like that one day. I saw in the posts someone ask about the 90 axle being wide. Do the wheels stick out or is the axle about the same width?

02-25-2012, 10:44 AM	#66
Budman56 Registered User Join Date: Aug 2011 Location: Patterson California Posts: 1,133	Re: here's my truck 65 c20 Well while looking through craigs list yesterday i found a new project, i just couldnt pass up. It was almost free, $275.00 with brand new tires, wheels, and a freshly rebuilt steering column. With rust free doors. Attached Images __________________ MY 65 C20 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=483346 ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/

02-25-2012, 10:58 AM	#67
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: here's my truck 65 c20 Nice build !! Did you get the starter wiring ? __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

02-25-2012, 11:33 AM	#68
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: here's my truck 65 c20 Wow! Nice find, budman. Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

07-07-2012, 05:34 PM	#70
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,374	Re: here's my truck 65 c20 Lookin great __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

07-07-2012, 06:05 PM	#71
HeloCrewChief Senior Member Join Date: Aug 2010 Location: North Alabama Posts: 1,056	Re: here's my truck 65 c20 Sweet project. My family had a house in Temecula for a while. Do you mind me asking where you got your cab sand blasted and primered and how much it set you back? THanks __________________ 1970 C10 to K20 conversion 1974 GMC Jimmy 1968 50th Anniversary Short Bed 1968 Chevelle 1964 Comet Caliente 1990 W250 Cummins

07-07-2012, 06:41 PM	#73
HeloCrewChief Senior Member Join Date: Aug 2010 Location: North Alabama Posts: 1,056	Re: here's my truck 65 c20 Glad I asked. Was getting quoted $500-$700. Where did you get it done at? __________________ 1970 C10 to K20 conversion 1974 GMC Jimmy 1968 50th Anniversary Short Bed 1968 Chevelle 1964 Comet Caliente 1990 W250 Cummins

03-23-2013, 10:52 PM	#75
GMCNUT Senior Member Join Date: Jun 2007 Location: Arab Alabama Posts: 1,809	Re: here's my truck 65 c20 Man, I hope I am crazy but it looks like the intake has nowhere to put the oil fill tube and the valve covers do not have breather caps so where the heck do you pour in the oil?



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.