KS Just parted out 72 custom camper with a 350/AC - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 04-12-2012, 06:24 PM

Graham57Am here is the best bat tray I have, its a non AC one and buckets

**Graham57a** · 04-12-2012, 08:54 PM

I'll pass on the battery tray but I'll take the headlight buckets. How much shipped to 28115?

Ozark Tim · 04-12-2012, 09:10 PM

I wonder what that was all about?? I didnt go that far. Just put a battery on it and it cranked. I did check the numbers on that one and it was the correct motor for the truck. Hope that wasnt a waste for you man. I know the body was rough but at least you were able to do some good I hope.
Anyway about that vac advance pipe, look at picture 3-5. The piece I am looking for is on there. If you didnt save it not a big deal but I will be needing one and the little retaining clip it attaches to which is held by the intake bolt just aft of the choke housing.
Thanks Randy,
Tim

Bethewaz · 04-12-2012, 09:26 PM

Quote:

Originally Posted by teeitup

Bethewaz, here are the 2 best I have, not perfect but not junk either

Great, Ill take 'em

teeitup · 04-12-2012, 09:56 PM

Graham57A, are you needing the chrome rings for headlights? If so $25 shipped for buckets and rings or $18 shipped for buckets

OzarkTim, Tim, no worries its all fine. On the line your needing I forgot I sold it with carb and other motor stuff sorry.

Artic1212, Steve, rear taillights and housings $20, center AC dash vent assembly, chrome is worn $10 for it and $11 shipping

Bethewaz, door handles and headlight rings are yours. The pm we have going has info

Thanks Randy

**Graham57a** · 04-12-2012, 10:12 PM

What would the chrome rings be used for? It'll be goin on a 71-2 grill.

Artic1212 · 04-13-2012, 05:21 AM

Quote:

Originally Posted by teeitup

Graham57A, are you needing the chrome rings for headlights? If so $25 shipped for buckets and rings or $18 shipped for buckets

OzarkTim, Tim, no worries its all fine. On the line your needing I forgot I sold it with carb and other motor stuff sorry.

Artic1212, Steve, rear taillights and housings $20, center AC dash vent assembly, chrome is worn $10 for it and $11 shipping

Bethewaz, door handles and headlight rings are yours. The pm we have going has info

Thanks Randy

Ok, thanks.

I will take them, and PM you tonight when I get home from work. Thanks!

teeitup · 04-13-2012, 08:18 AM

Graham57A, they hold the headlights in

Artic1212, sounds good

Thanks Randy

**Graham57a** · 04-13-2012, 08:57 AM

I'll take em, 25 shipped. PM me your address and I'll have the payment sent out today

Tuff Gong · 04-14-2012, 05:41 PM

Did that truck still have the factory custom camper wiring for towing?

KensChevy · 04-17-2012, 09:40 PM

Im in need of the emergency brake pedal assembly - and possibly the cables?

KensChevy · 04-17-2012, 09:57 PM

I will take the e brake....you take paypal?

teeitup · 04-18-2012, 07:38 AM

sorry no pay pal only money orders, I will get a quote tonight. Thanks Randy

04-12-2012, 06:24 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Just parted out 72 custom camper with a 350/AC Graham57Am here is the best bat tray I have, its a non AC one and buckets Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-12-2012, 08:54 PM	#2
Graham57a Senior Member Join Date: Aug 2010 Location: Asheville, North Carolina Posts: 1,867	Re: Just parted out 72 custom camper with a 350/AC I'll pass on the battery tray but I'll take the headlight buckets. How much shipped to 28115? __________________ ANDREW 1972 Chevy SWB Cheyenne Super JANE http://67-72chevytrucks.com/vboard/s...d.php?t=462072 1972 GMC Jimmy PENNY http://67-72chevytrucks.com/vboard/s...d.php?t=735827 1968 GMC patina swb PEARL http://67-72chevytrucks.com/vboard/s...d.php?t=731315 1972 Chevy K20 BRUCE http://67-72chevytrucks.com/vboard/s...d.php?t=805788

04-12-2012, 09:10 PM	#3
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: Just parted out 72 custom camper with a 350/AC I wonder what that was all about?? I didnt go that far. Just put a battery on it and it cranked. I did check the numbers on that one and it was the correct motor for the truck. Hope that wasnt a waste for you man. I know the body was rough but at least you were able to do some good I hope. Anyway about that vac advance pipe, look at picture 3-5. The piece I am looking for is on there. If you didnt save it not a big deal but I will be needing one and the little retaining clip it attaches to which is held by the intake bolt just aft of the choke housing. Thanks Randy, Tim

04-12-2012, 09:56 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Just parted out 72 custom camper with a 350/AC Graham57A, are you needing the chrome rings for headlights? If so $25 shipped for buckets and rings or $18 shipped for buckets OzarkTim, Tim, no worries its all fine. On the line your needing I forgot I sold it with carb and other motor stuff sorry. Artic1212, Steve, rear taillights and housings $20, center AC dash vent assembly, chrome is worn $10 for it and $11 shipping Bethewaz, door handles and headlight rings are yours. The pm we have going has info Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-12-2012, 10:12 PM	#6
Graham57a Senior Member Join Date: Aug 2010 Location: Asheville, North Carolina Posts: 1,867	Re: Just parted out 72 custom camper with a 350/AC What would the chrome rings be used for? It'll be goin on a 71-2 grill. __________________ ANDREW 1972 Chevy SWB Cheyenne Super JANE http://67-72chevytrucks.com/vboard/s...d.php?t=462072 1972 GMC Jimmy PENNY http://67-72chevytrucks.com/vboard/s...d.php?t=735827 1968 GMC patina swb PEARL http://67-72chevytrucks.com/vboard/s...d.php?t=731315 1972 Chevy K20 BRUCE http://67-72chevytrucks.com/vboard/s...d.php?t=805788

04-13-2012, 08:18 AM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Just parted out 72 custom camper with a 350/AC Graham57A, they hold the headlights in Artic1212, sounds good Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-13-2012, 08:57 AM	#9
Graham57a Senior Member Join Date: Aug 2010 Location: Asheville, North Carolina Posts: 1,867	Re: Just parted out 72 custom camper with a 350/AC I'll take em, 25 shipped. PM me your address and I'll have the payment sent out today __________________ ANDREW 1972 Chevy SWB Cheyenne Super JANE http://67-72chevytrucks.com/vboard/s...d.php?t=462072 1972 GMC Jimmy PENNY http://67-72chevytrucks.com/vboard/s...d.php?t=735827 1968 GMC patina swb PEARL http://67-72chevytrucks.com/vboard/s...d.php?t=731315 1972 Chevy K20 BRUCE http://67-72chevytrucks.com/vboard/s...d.php?t=805788

04-14-2012, 05:41 PM	#10
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: Just parted out 72 custom camper with a 350/AC Did that truck still have the factory custom camper wiring for towing?

04-17-2012, 09:40 PM	#11
KensChevy Registered User Join Date: Jul 2011 Location: Cleburne Texas Posts: 91	Re: Just parted out 72 custom camper with a 350/AC Im in need of the emergency brake pedal assembly - and possibly the cables?

04-17-2012, 09:57 PM	#12
KensChevy Registered User Join Date: Jul 2011 Location: Cleburne Texas Posts: 91	Re: Just parted out 72 custom camper with a 350/AC I will take the e brake....you take paypal?

04-18-2012, 07:38 AM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Just parted out 72 custom camper with a 350/AC sorry no pay pal only money orders, I will get a quote tonight. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.