CA 1971 GMC BB Complete Part Out - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**88JRFAN** · 12-18-2013, 07:56 PM

[QUOTE=budnikguy;6423194]Kick down wiring was bad in a few spots...here are some pics.=Quote]

I'll take it. It's a starting point. Let me know a price. Thanks, Daren

kaphillips · 12-14-2013, 10:30 PM

I would like to get second in line on the cruise control transducer and its mounting bracket. Interested also in the auxillary battery wiring harness if it is complete and in good shape.

ZEKE68 · 12-14-2013, 10:55 PM

I will take the exhaust manifolds ( assuming they are undamaged ). Do they include all down to the pipes? Please PM me your info for payment. When will you have them off? $175 plus shipping , shipping will be to 32754

budnikguy · 12-15-2013, 12:33 PM

Looks like RH side (passenger) is original, but, LH (driver) has been replaced with a newer manifold..I may have another set from another truck I will take a look and post pics...

Adam

Quote:

Originally Posted by ZEKE68

I will take the exhaust manifolds ( assuming they are undamaged ). Do they include all down to the pipes? Please PM me your info for payment. When will you have them off? $175 plus shipping , shipping will be to 32754

budnikguy · 12-15-2013, 12:18 PM

Noted as second in line on CC, no auxiliary wiring harness present..

Quote:

Originally Posted by kaphillips

I would like to get second in line on the cruise control transducer and its mounting bracket. Interested also in the auxillary battery wiring harness if it is complete and in good shape.

**gmc 2500 4x4** · 12-14-2013, 11:19 PM

put me inline, throttle cable, return spring, and both fenders w/ chrome eyebrows, and seat belts dark green,if you would ship them to 14063

John Pasinski · 12-15-2013, 06:09 AM

I'll be second in line for the slider window shipped to 32821.
How much for the radio antenna shipped to the same zip?

budnikguy · 12-15-2013, 12:45 PM

Second in line on slider noted..and pending more deailed pics, and I will put you 1st in line on antenna..we can then get you a price for both is it plays out that way...Thanks

Quote:

Originally Posted by John Pasinski

I'll be second in line for the slider window shipped to 32821.
How much for the radio antenna shipped to the same zip?

budnikguy · 12-24-2013, 02:48 AM

Here is the antenna ...removed

Quote:

Originally Posted by John Pasinski

I'll be second in line for the slider window shipped to 32821.
How much for the radio antenna shipped to the same zip?

budnikguy · 12-15-2013, 12:43 PM

I had posted the manual throttle in separate post
http://67-72chevytrucks.com/vboard/s...d.php?t=608027

I will pull the fenders and get you more detailed pics, the seatblelts I am using on a suburban...

Quote:

Originally Posted by gmc 2500 4x4

put me inline, throttle cable, return spring, and both fenders w/ chrome eyebrows, and seat belts dark green,if you would ship them to 14063

**gmc 2500 4x4** · 12-15-2013, 01:11 PM

Quote:

Originally Posted by budnikguy

I had posted the manual throttle in separate post
http://67-72chevytrucks.com/vboard/s...d.php?t=608027

I will pull the fenders and get you more detailed pics, the seatblelts I am using on a suburban...

ok on fenders, i meant the cable from carb to gas peddle

budnikguy · 12-15-2013, 01:26 PM

pedal to carb np...let me pull it and then quote you!

Quote:

Originally Posted by gmc 2500 4x4

ok on fenders, i meant the cable from carb to gas peddle

**gmc 2500 4x4** · 12-27-2013, 08:46 AM

add that coat hook if its dark green. and that will be it(both fenders w/eyebrows and cable carb to peddle

timmoser · 12-15-2013, 10:30 AM

Would you have a set of black seat belts?

budnikguy · 12-15-2013, 12:47 PM

Not currently....sorry

Quote:

Originally Posted by timmoser

Would you have a set of black seat belts?

**88JRFAN** · 12-15-2013, 01:01 PM

The wiring harness that plugs into the tranny to make it downshift. Hope that explains it better.

budnikguy · 12-15-2013, 01:24 PM

Got ya,,,,let me pull it and confirm condition of wiring..I will post pic for you

Quote:

Originally Posted by 88JRFAN

The wiring harness that plugs into the tranny to make it downshift. Hope that explains it better.

**88JRFAN** · 12-15-2013, 08:05 PM

Quote:

Originally Posted by budnikguy

Got ya,,,,let me pull it and confirm condition of wiring..I will post pic for you

Sounds good. Thanks, Daren

EdB · 12-15-2013, 12:29 PM

How much for the vacuum canister mounted on the AC housing?

EdB

budnikguy · 12-15-2013, 12:54 PM

$25 shipped in a medium flat rate box...

Quote:

Originally Posted by EdB

How much for the vacuum canister mounted on the AC housing?

EdB

rich67 · 12-15-2013, 02:02 PM

wud like to get in line on the fender eyebrows please. and a price on the epaporator core and a/c lines if any. pretty much all the a/c lines in the engine bay and the core to the compressor and the dryer. and duct work under the dash that runs to the vents if decent. and one vent adapter thats rite behind the a/c ball vents. pm me if you need some more explaining sir. lol

budnikguy · 12-17-2013, 09:13 PM

Have not made it that far yet...badge may or may not go with the glovebox door depending on the persons interest..have not made it that far into the interior yet for your other requested items

.

Quote:

Originally Posted by rich67

wud like to get in line on the fender eyebrows please. and a price on the epaporator core and a/c lines if any. pretty much all the a/c lines in the engine bay and the core to the compressor and the dryer. and duct work under the dash that runs to the vents if decent. and one vent adapter thats rite behind the a/c ball vents. pm me if you need some more explaining sir. lol

rich67 · 12-17-2013, 11:36 PM

Quote:

Originally Posted by budnikguy

Have not made it that far yet...badge may or may not go with the glovebox door depending on the persons interest..have not made it that far into the interior yet for your other requested items

.

its ok sir. dont worry about the a/c stuff. think i have a line on that stuff turns out. but for sure keep me in line on the fender eyebrows. if i read right i should be second. you can correct me if im wrong. and if the badge doesnt go with the glove box door ill be interested. also put me in line for the antannae. passenger side kick panel vent pull assembly also. and if the cab gets cut up im looking for the outer cab floor sections that hook to the inner rockers.full length of the door. bothsides.
thanx for the update, rich

BlackhillsHD · 12-17-2013, 11:58 PM

Looking for the A/C fresh air door, mounts under the cowl and goes out under the hood with a little lever. Price plus shipping to 57701 thanks.

rich67 · 12-15-2013, 02:03 PM

and the gmc cuctom badge on the glove box door. passenger side kick panel vent pull assembly also. and if the cab gets cut up im looking for the outer cab floor sections that hook to the inner rockers.full length of the door. bothsides. all would be shipped to 62356

12-18-2013, 07:56 PM	#1
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: 1971 GMC BB Complete Part Out [QUOTE=budnikguy;6423194]Kick down wiring was bad in a few spots...here are some pics.=Quote] I'll take it. It's a starting point. Let me know a price. Thanks, Daren __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

12-14-2013, 10:30 PM	#2
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: 1971 GMC BB Complete Part Out I would like to get second in line on the cruise control transducer and its mounting bracket. Interested also in the auxillary battery wiring harness if it is complete and in good shape.

12-14-2013, 10:55 PM	#3
ZEKE68 Registered User Join Date: Jul 2012 Location: Space Coast, Florida Posts: 408	Re: 1971 GMC BB Complete Part Out I will take the exhaust manifolds ( assuming they are undamaged ). Do they include all down to the pipes? Please PM me your info for payment. When will you have them off? $175 plus shipping , shipping will be to 32754

12-14-2013, 11:19 PM	#6
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,975	Re: 1971 GMC BB Complete Part Out put me inline, throttle cable, return spring, and both fenders w/ chrome eyebrows, and seat belts dark green,if you would ship them to 14063

12-15-2013, 06:09 AM	#7
John Pasinski Registered User Join Date: Aug 2007 Location: orlando Posts: 456	Re: 1971 GMC BB Complete Part Out I'll be second in line for the slider window shipped to 32821. How much for the radio antenna shipped to the same zip? __________________ A man's thoughts devise his ways; but it's GOD that directs his steps.

12-27-2013, 08:46 AM	#13
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,975	Re: 1971 GMC BB Complete Part Out add that coat hook if its dark green. and that will be it(both fenders w/eyebrows and cable carb to peddle

12-15-2013, 10:30 AM	#14
timmoser Registered User Join Date: Oct 2012 Location: Elora Ontario , Canada Posts: 140	Re: 1971 GMC BB Complete Part Out Would you have a set of black seat belts?

12-15-2013, 01:01 PM	#16
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: 1971 GMC BB Complete Part Out The wiring harness that plugs into the tranny to make it downshift. Hope that explains it better. __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

12-15-2013, 12:29 PM	#19
EdB Registered User Join Date: Jan 2003 Location: Gulfport Ms Posts: 401	Re: 1971 GMC BB Complete Part Out How much for the vacuum canister mounted on the AC housing? EdB

12-15-2013, 02:02 PM	#21
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: 1971 GMC BB Complete Part Out wud like to get in line on the fender eyebrows please. and a price on the epaporator core and a/c lines if any. pretty much all the a/c lines in the engine bay and the core to the compressor and the dryer. and duct work under the dash that runs to the vents if decent. and one vent adapter thats rite behind the a/c ball vents. pm me if you need some more explaining sir. lol Last edited by rich67; 12-15-2013 at 02:11 PM.

12-17-2013, 11:58 PM	#24
BlackhillsHD Registered User Join Date: Nov 2011 Location: Rapid City SD Posts: 140	Re: 1971 GMC BB Complete Part Out Looking for the A/C fresh air door, mounts under the cowl and goes out under the hood with a little lever. Price plus shipping to 57701 thanks. __________________ 1970 : Chevy: K20 "Frank the Tank" 6.0 LS, 4L80E, 14 bolt, and Dana 44 1970 K5 Blazer CST 350, TH350, Np205, Dana 60 and 14 bolt General Motors Master Certified wrench swinger ASE certified Master auto tech Instructor of Automotive Technology

12-15-2013, 02:03 PM	#25
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: 1971 GMC BB Complete Part Out and the gmc cuctom badge on the glove box door. passenger side kick panel vent pull assembly also. and if the cab gets cut up im looking for the outer cab floor sections that hook to the inner rockers.full length of the door. bothsides. all would be shipped to 62356 Last edited by rich67; 12-15-2013 at 02:44 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.