Dropped spindles with Truck rallys

[Leverhead]

OK...makes sense now....although we wont necessarily be comparing apples to apples when we do the conversion. Also, I have all the 73-87 suspension parts from the kit that I originally bought and cant use now with the new modular spindles so if you need any of the parts let me know....I may be able to save you some $$$ if you didn't already buy them.....they are still in the bags.

[LostMy65]

I got all the ball joints, but I could probably use the inner and outer tie-rods.

[chevy_mike]

Originally Posted by LostMy65

Lower:

.
Upper:

Yep, that looks right. If you had the wrong spindles for the ball joints, you would have problems with either the nut not going down far enough or going way too far and the hole ends up above the nut.

You look good from what I see. I put these on my '65 C10 truck that had '74 suspension/steering conversion done prior to me. Fit just like what you have.

[Wilson!]

are the modular spindles made for the 1" or 1.25" rotors?

[chevy_mike]

Originally Posted by Wilson!

are the modular spindles made for the 1" or 1.25" rotors?

1.25" rotors

[Leverhead]

Originally Posted by LostMy65

I got all the ball joints, but I could probably use the inner and outer tie-rods.

Hi Lost65,
The kit only came with outers...so I have them if you want them. Send me a PM with your shipping info and I'll send them to you...Merry Christmas!