KS Parting: 157" 69 GMC 1 Ton with buckets

[RedRoad]

thanks for the effort, its a lot worse off than I hoped. Ill have to pass.

[Oddfire]

Mike P-lights look good. How much for those w/pigtails + mounting screws shipped to 22630? Jamie

[bluek5]

Mike,
For $20 shipped for the manual throttle, I will take it. Send me your payment information. Put me in line for the carpet clips also.
Thanks, Paul

[1968k20]

Just the radio and knobs

[mgkgmc]

How's the white ashtray in the truck?

[mgkgmc]

Is there a tank cover?

[Vero67]

I am looking for the metal parts inside a non ac heater box. My box is good, but the flap door rod and other metal parts are rusted through. Would you have spare metal parts? If so price shipped to 32968. Thanks John

[Cash3481]

Originally Posted by RedRoad

thanks for the effort, its a lot worse off than I hoped. Ill have to pass.

I thought so too! LOL

Originally Posted by Oddfire

Mike P-lights look good. How much for those w/pigtails + mounting screws shipped to 22630? Jamie

How about $35 shipped?

Originally Posted by bluek5

Mike,
For $20 shipped for the manual throttle, I will take it. Send me your payment information. Put me in line for the carpet clips also.
Thanks, Paul

PM inbound in a few!

Originally Posted by 1968k20

Just the radio and knobs

This truck is missing one of the knobs (pass side) but ill see if I have another one.

Originally Posted by mgkgmc

How's the white ashtray in the truck?

I can get you a better pic of it today. Its in the pics but harder to tell. Ill take one of it.

Originally Posted by mgkgmc

Is there a tank cover?

no cover the carpet is deteriorated and gone.

Originally Posted by Vero67

I am looking for the metal parts inside a non ac heater box. My box is good, but the flap door rod and other metal parts are rusted through. Would you have spare metal parts? If so price shipped to 32968. Thanks John

Ill see what I have.

[mattgoat]

Do you have the heater control light assembly?

[Cash3481]

Originally Posted by mattgoat

Do you have the heater control light assembly?

Do you mean just the light bulb and wire pigtail? Its part of the harness, unless I'm mistaken. Surly I have an old harness to get you a light bulb and pigtail off of!

[OLDTRUCKHAULER]

Mike, there is a machined pad at the front of the pass. cyl. head. The engine displacement
and serial number is stamped on it, displacement is first set of numbers.
Price is good for me. Shipping to 28401?
And $ for back wheels? Don't need the fronts if they are snap rings.
May be able to make a roadtrip out of this vs shipping everything, (therapy for me).

[mattgoat]

Yes, I would like the whole assembly. From where it clips into under dash harness to the metal cage part that attaches to the heater control. My metal part that holds bulb and attaches to the heater control is broken.

Matt

[Cash3481]

Originally Posted by OLDTRUCKHAULER

Mike, there is a machined pad at the front of the pass. cyl. head. The engine displacement
and serial number is stamped on it, displacement is first set of numbers.
Price is good for me. Shipping to 28401?
And $ for back wheels? Don't need the fronts if they are snap rings.
May be able to make a roadtrip out of this vs shipping everything, (therapy for me).

It will take a few days to get this palletized and in to a freight co. Do you need the tranny and motor or just the motor. I have a co that does crates but not sure on the price. Ill find out.

Originally Posted by mattgoat

Yes, I would like the whole assembly. From where it clips into under dash harness to the metal cage part that attaches to the heater control. My metal part that holds bulb and attaches to the heater control is broken.
Matt

Matt,
Ill get you a picture of what I can do without.

[bk04z66]

Originally Posted by Cash3481

I have a VGC box I will post pics of it for you.there is a small rusted area around the fan motor but I can include another one with the box and it can be riveted in to make it perfect. Let me know if your still interested. Here's a pic.

I am interested, how much shipped to 27258 thanks

[hanly2]

I need the clutch fork wedge and the spring that goes to the frame. Also need a wheel hub if you decide to part the rear. I think I have a h072, may even need the brake shoes I cant find them online either.

[OLDTRUCKHAULER]

Mike, both eng/trans. $200.00 and 1 piece rear wheels for? Let me know, I'll load my paypal account.

Mike OLDTRUCKHAULER

[Oddfire]

Mike $35 shipped sounds good. I'll send payment tomorrow after my check posts. Thanks for the great deal. Jamie

[Cash3481]

Originally Posted by hanly2

I need the clutch fork wedge and the spring that goes to the frame. Also need a wheel hub if you decide to part the rear. I think I have a h072, may even need the brake shoes I cant find them online either.

I think dieselwrencher is buyng the rolling chassis... I'll let you know!

Originally Posted by OLDTRUCKHAULER

Mike, both eng/trans. $200.00 and 1 piece rear wheels for? Let me know, I'll load my paypal account.
Mike OLDTRUCKHAULER

I'll get the rough estimate tomorrow around lunch.

Originally Posted by Oddfire

Mike $35 shipped sounds good. I'll send payment tomorrow after my check posts. Thanks for the great deal. Jamie

Thank you sir.

[Cash3481]

Originally Posted by mgkgmc

How's the white ashtray in the truck?

Here's your pic!

[Cash3481]

Originally Posted by OLDTRUCKHAULER

Mike, both eng/trans. $200.00 and 1 piece rear wheels for? Let me know, I'll load my paypal account.

Mike OLDTRUCKHAULER

Checked the wheels and they are ALL split rims. I didn't realize they are turned inside out on the dually rears. Sorry!

[DeadheadNM]

Originally Posted by Cash3481

Pete,
Looks like carpet clips are still intact. I count 8, I believe right now. Can't see behind the seats yet. How about $35 shipped for them?

Mike I'll take these - need shipped to different address than the GB door in case that adds some.

Originally Posted by Cash3481

Pete, here is a pic of the console bottom. It's cracked, broken and beat up... Kind of like me! Lol

If the screws to attach the console to the floor pan seem OEM (matching, all crusty from spilled soda for example) I'll take those shipped with the GB door - let me know what you need for them. Thanks!!

[OLDTRUCKHAULER]

Mike, Bummer on the DRW's. I'll stay with the eng/trans. Did you look at the
#'s stamped in front of pass head for displacement?

OLDTRUCKHAULER

[Cash3481]

Originally Posted by oldtruckhauler

mike, there is a machined pad at the front of the pass. Cyl. Head. The engine displacement
and serial number is stamped on it, displacement is first set of numbers.
Price is good for me. Shipping to 28401?
And $ for back wheels? Don't need the fronts if they are snap rings.
May be able to make a roadtrip out of this vs shipping everything, (therapy for me).

305e523601

[jjzepplin]

I need an ashtray and bracket for a 70 Chevy. No specific color. I think it screws to the dash? 33578

[1968k20]

Price plus shipping on radio? If you don't find the knob, that's ok.