New 1960-66 swb fleetside bed kits!

[Nsanehotrodz]

Originally Posted by kenwkirk

Thank you Very Much sir ------ I wasn't really aware of that option ----- this is definitely a budget build --- with that being taken into consideration can I change just the trailing arms or is there more that is necessary in order to accomplish this ??? any help would be GREATLY APPRECIATED ---- anyone else cares to chime in feel free to ----- once again THANKS VERY MUCH

I have a few ideas that might save you a lot of money centering the rear wheels. Give me a call when you get a chance.

Originally Posted by Chevy Fleetside

the one about the parts being from overseas. Everything comes from overseas.

I never said the bedsides were made in the US. Almost everything that has a black coating is from overseas. I assumed everyone knew that all the parts came from overseas. I just have never had a fitment problem with the parts we receive and we install them quite frequently and we have installed these parts on every year range of the Chevrolet Trucks 1947-72. That's why I try to be helpful and post pictures of MY process of installation because everyone doesn't go about it the same way, we know what to do to make it easy because we do install these parts so often.

[Chevy Fleetside]

Originally Posted by Nsanehotrodz

I have a few ideas that might save you a lot of money centering the rear wheels. Give me a call when you get a chance.



I never said the bedsides were made in the US. Almost everything that has a black coating is from overseas. I assumed everyone knew that all the parts came from overseas. I just have never had a fitment problem with the parts we receive and we install them quite frequently and we have installed these parts on every year range of the Chevrolet Trucks 1947-72. That's why I try to be helpful and post pictures of MY process of installation because everyone doesn't go about it the same way, we know what to do to make it easy because we do install these parts so often.

Just for the record. I wasn't questioning you. I know where these parts come from and the chances that everybody takes using them. It is nice to know they fit well though.

[thekid54]

Originally Posted by Nsanehotrodz

I never said the bedsides were made in the US. Almost everything that has a black coating is from overseas. I assumed everyone knew that all the parts came from overseas. I just have never had a fitment problem with the parts we receive and we install them quite frequently and we have installed these parts on every year range of the Chevrolet Trucks 1947-72. That's why I try to be helpful and post pictures of MY process of installation because everyone doesn't go about it the same way, we know what to do to make it easy because we do install these parts so often.

I'm sure most folks are aware that all these reproduction parts are made overseas, but I think people may have been confused by some of your statements and incorrectly assumed that you were a separate manufacturer/supplier. When you type statements like, "Our swb fleet bedsides are on sale for $510ea"; "Here are some pictures of our tailgate installed on the '62."; or "We are using one of our aftermarket Chevrolet tailgates", it can be a bit confusing.

That said, I'm curious who supplies the tailgates that you use. I just bought a reproduction gate second hand and it fits like crap (given my location, I'm guessing it was originally sold by the Truck Shop). When closed, the top edge of the gate sits up about a 1/4" above the bedsides, on both sides.

[Nsanehotrodz]

The tailgates we sell are triplus. We don't have any trouble with them. Everything aftermarket needs a little persuasion but that's where we offer something that no other vendor does. You can call us and we will tell you what WE do to install them and tips to make the install easier.

[Nsanehotrodz]

We now offer a complete steel floor swb bed kit for the 1960-66 Chevy trucks! Here is a sneak peak of our new kit!

[DPowers]

You must have just installed that as it wasn't there at the show on Sat???

[Nsanehotrodz]

Originally Posted by DPowers

You must have just installed that as it wasn't there at the show on Sat???

Yeah we just finished the kit today! Everything is completely bolt in.

[jlwilliams598]

When will the steel floor be available and what's the price?

[jlwilliams598]

Do you combine shipping if I order several parts or is it easier to come and get them?

[j.kirn]

[QUOTE=thekid54;7436544]I'm sure most folks are aware that all these reproduction parts are made overseas, but I think people may have been confused by some of your statements and incorrectly assumed that you were a separate manufacturer/supplier. When you type statements like, "Our swb fleet bedsides are on sale for $510ea"; "Here are some pictures of our tailgate installed on the '62."; or "We are using one of our aftermarket Chevrolet tailgates", it can be a bit confusing.

That said, I'm curious who supplies the tailgates that you use. I just bought a reproduction gate second hand and it fits like crap (given my location, I'm guessing it was originally sold by the Truck Shop). When closed, the top edge of the gate sits up about a 1/4" above the bedsides, on both sides.[/QUy That's what had me confused the statement of OUR PARTS

[Nsanehotrodz]

We are currently the only dealer offering the 1960-1966 Fleetside bed kit with a steel floor ! The price on the bed kits is $3500 . We will offer assembly on these kits for an additional $500 . These will not be available to be shipped , it will be pickup only. We are doing a limited run on these kits so make sure you get your orders in ASAP. Give us a call today to make sure you don't miss out ! 865-761-0460

[Nsanehotrodz]

Here are some pictures of the truck from last week.

[flashed]

Dang ,that looks great .

[sampsmit000]

How much for front fenders shipped to 84043

[Nsanehotrodz]

Originally Posted by flashed

Dang ,that looks great .

Thanks!

Originally Posted by sampsmit000

How much for front fenders shipped to 84043

PM sent!

[schpeen]

now if only someone offered
a new cab! LOL

looks awesome man nice work
thank you for sharing

[Nsanehotrodz]

Originally Posted by schpeen

now if only someone offered
a new cab! LOL

looks awesome man nice work
thank you for sharing

Its funny you mention that Here is a '64-66 cab I am building. This cab is the best one I have seen so far. This cab/doors will be available next month completely finished ready to paint. We also offer solid original paint cabs that you can finish yourself!

[Rod Stryker]

those doors look like they fit pretty good, might be in need of those soon....

[Nsanehotrodz]

Originally Posted by Rod Stryker

those doors look like they fit pretty good, might be in need of those soon....

They fit up very well. Don't forget the forum has a standing 10% off coupon! Call us and we can get them on their way! 865-761-0460

[Nsanehotrodz]

A couple more pics of our new smooth firewall going in the '64 C10.


[IMG]

[LT1 Burb]

Originally Posted by Nsanehotrodz

Here are some pictures of our tailgate installed on the '62.

Does that tailgate sit flush if you look at it from the side, my OEM one sticks out of the end caps and I don't like it, might order a repop if they fit better.

[Nsanehotrodz]

Originally Posted by LT1 Burb

Does that tailgate sit flush if you look at it from the side, my OEM one sticks out of the end caps and I don't like it, might order a repop if they fit better.

Our new tailgates line up flush with the bedsides from top to bottom.

[DakotaKid]

do you offer just the steel floor not as a whole bed?

[LT1 Burb]

Any chance of getting a measurement of the thickness of the gate at say the notch near the chain latch.

[Nsanehotrodz]

Originally Posted by DakotaKid

do you offer just the steel floor not as a whole bed?

We offer the complete kit only. You have to change more than just the floor.

Originally Posted by LT1 Burb

Any chance of getting a measurement of the thickness of the gate at say the notch near the chain latch.

1.75" at the top of the notch.