MO Parting out 67 C20, very well optioned. - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Grumpy old man** · 11-01-2017, 08:37 AM

Interested in the 4 speed column , When your ready to pull it ?

**specialtyretail** · 11-01-2017, 11:01 AM

Quote:

Originally Posted by Never enough

Hard to judge how tight they are from pics but they appear to be better than the ones on the truck. I'll get them, but did you see my other question about a left door actuator and handle ? Handle is for a '69.

If you pull the springs and fold the hinges, they fit in a much smaller box...

They are yours. Sorry, no interior door stuff at all. Thanks, Fred.

Never enough · 11-07-2017, 09:04 AM

Quote:

Originally Posted by Never enough

Hard to judge how tight they are from pics but they appear to be better than the ones on the truck. I'll get them, but did you see my other question about a left door actuator and handle ? Handle is for a '69.

If you pull the springs and fold the hinges, they fit in a much smaller box...

Hinges arrived yesterday. Already on and a huge improvement in hood alignment !!

projectking · 11-01-2017, 08:57 AM

Drivers side vent window if it's non tinted glass and you actually have it?

**specialtyretail** · 11-01-2017, 11:56 AM

Quote:

Originally Posted by projectking

Drivers side vent window if it's non tinted glass and you actually have it?

Sorry, no door internals at all. Thanks, Fred.

Never enough · 11-01-2017, 12:03 PM

Quote:

Originally Posted by specialtyretail

Sorry, no door internals at all. Thanks, Fred.

OK, funds sent.
Any decision on the center A/C vent before you ship ?

Myoldtruck · 11-01-2017, 01:00 PM

Im still in it for the a/c dash vents.

**specialtyretail** · 11-01-2017, 01:18 PM

Quote:

Originally Posted by Myoldtruck

Im still in it for the a/c dash vents.

Yes, you are. i just had a lot going on last night and did not get out to the shop. Should have some info for you tonight. Thanks, Fred.

chuckmc8 · 11-03-2017, 05:31 AM

Fred, Do you have a nice 67 rearview mirror head?

**specialtyretail** · 11-04-2017, 08:47 AM

Quote:

Originally Posted by chuckmc8

Fred, Do you have a nice 67 rearview mirror head?

This what came out of it. It has the typical checking and hazing, needs a good cleaning. If you can use it, $12.00 shipped. Thanks, Fred.

Perpendicular · 11-04-2017, 11:47 AM

Rear bumper brackets available? If so, how much shipped to 23432?

-Paul

**specialtyretail** · 11-04-2017, 12:01 PM

Quote:

Originally Posted by Perpendicular

Rear bumper brackets available? If so, how much shipped to 23432?

-Paul

Sorry, no rear bumper brackets. Thanks, Fred.

Myoldtruck · 11-04-2017, 04:44 PM

Money sent for the a/c vents, thank you.

**specialtyretail** · 11-04-2017, 05:41 PM

Quote:

Originally Posted by Myoldtruck

Money sent for the a/c vents, thank you.

Going out Monday. Thanks, Fred.

**specialtyretail** · 11-06-2017, 06:06 PM

Probably going to do a radio repair panel cut out of the dash if anyone needs it. Thanks, Fred.

Azmxdad · 11-06-2017, 10:16 PM

How much for the clutch pedal shipped to 85741?

**specialtyretail** · 11-06-2017, 10:55 PM

Quote:

Originally Posted by Azmxdad

How much for the clutch pedal shipped to 85741?

$65.00 for the assembly, shipped. Thanks, Fred.

dfwright · 11-07-2017, 05:46 PM

Fred, I thought I'd remind you that I'm still in the market for a heater control, if you come across one in fair condition.

**specialtyretail** · 11-07-2017, 06:46 PM

Quote:

Originally Posted by dfwright

Fred, I thought I'd remind you that I'm still in the market for a heater control, if you come across one in fair condition.

Yes sir, if i find a good one, you will be the first to know. Thanks, Fred.

**inline67c20** · 11-08-2017, 05:02 PM

Fred, could I get the ram horns and heat shields

**specialtyretail** · 11-08-2017, 05:29 PM

Quote:

Originally Posted by inline67c20

Fred, could I get the ram horns and heat shields

I have the heat shields listed here on the forum. I have not pulled the manifolds yet. How quickly are you needing them? Thanks, Fred.

**inline67c20** · 11-08-2017, 05:56 PM

Quote:

Originally Posted by specialtyretail

I have the heat shields listed here on the forum. I have not pulled the manifolds yet. How quickly are you needing them? Thanks, Fred.

I am not in big hurry, when you get to them would be fine.

**inline67c20** · 11-16-2017, 04:46 AM

Quote:

Originally Posted by specialtyretail

I have the heat shields listed here on the forum. I have not pulled the manifolds yet. How quickly are you needing them? Thanks, Fred.

Have you got to the manifolds yet?

**specialtyretail** · 11-16-2017, 08:49 AM

Quote:

Originally Posted by inline67c20

Have you got to the manifolds yet?

Hoping to Saturday if at all possible. Thanks, Fred.

**Vero67** · 11-18-2017, 01:27 AM

Looking an underdash harness, for gauges. My fusebox is pretty rusty. Thanks John

11-01-2017, 08:37 AM	#1
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Parting out 67 C20, very well optioned. Interested in the 4 speed column , When your ready to pull it ?

11-01-2017, 08:57 AM	#4
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: Parting out 67 C20, very well optioned. Drivers side vent window if it's non tinted glass and you actually have it? __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

11-01-2017, 01:00 PM	#7
Myoldtruck Registered User Join Date: Sep 2015 Location: Mohnton pa. Posts: 208	Re: Parting out 67 C20, very well optioned. Im still in it for the a/c dash vents.

11-03-2017, 05:31 AM	#9
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: Parting out 67 C20, very well optioned. Fred, Do you have a nice 67 rearview mirror head? __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

11-04-2017, 11:47 AM	#11
Perpendicular Registered User Join Date: May 2017 Location: Elgin, TX Posts: 329	Re: Parting out 67 C20, very well optioned. Rear bumper brackets available? If so, how much shipped to 23432? -Paul

11-04-2017, 04:44 PM	#13
Myoldtruck Registered User Join Date: Sep 2015 Location: Mohnton pa. Posts: 208	Re: Parting out 67 C20, very well optioned. Money sent for the a/c vents, thank you.

11-06-2017, 06:06 PM	#15
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: Parting out 67 C20, very well optioned. Probably going to do a radio repair panel cut out of the dash if anyone needs it. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

11-06-2017, 10:16 PM	#16
Azmxdad Registered User Join Date: Apr 2016 Location: TUCSON Posts: 20	Re: Parting out 67 C20, very well optioned. How much for the clutch pedal shipped to 85741?

11-07-2017, 05:46 PM	#18
dfwright Registered User Join Date: Jan 2009 Location: San Antonio, Texas Posts: 1,376	Re: Parting out 67 C20, very well optioned. Fred, I thought I'd remind you that I'm still in the market for a heater control, if you come across one in fair condition. __________________ 1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017

11-08-2017, 05:02 PM	#20
inline67c20 Junior Member Join Date: Apr 2015 Location: Bremerton, washington Posts: 85	Re: Parting out 67 C20, very well optioned. Fred, could I get the ram horns and heat shields

11-18-2017, 01:27 AM	#25
Vero67 Senior Member Join Date: May 2013 Location: Vero Beach FL Posts: 299	Re: Parting out 67 C20, very well optioned. Looking an underdash harness, for gauges. My fusebox is pretty rusty. Thanks John

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.