GA Parting 1966 panel truck - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**PGSigns** · 05-31-2018, 07:02 AM

Never heard back on the tail lights.
Jimmy

**southern parts** · 05-31-2018, 12:12 PM

$50 on the tail lights. The lenses are cracked

Killer Bee · 06-04-2018, 06:23 PM

everything arrived well packed and as advertised, thank you!

1960chevypanel · 06-04-2018, 07:49 PM

Hey Woody just making sure you got the email I sent you about the Custom trim. No rush, whenever you get a chance is fine.

**southern parts** · 06-05-2018, 09:37 AM

The custom trim has lost most of the anodized coating and all of the pieces have some scratches.I did buy the light weight pvc pipe.

**aerotruk63** · 06-05-2018, 11:19 AM

Very happy with schroud and pulleys. Can you show me the fasteners that hold the schroud to the baffels please.

**southern parts** · 06-05-2018, 07:17 PM

here you go. 3/8 head and less than 1/2 of thread

**aerotruk63** · 06-05-2018, 07:58 PM

Thank you. Would you sell the fasteners?

**aerotruk63** · 06-08-2018, 05:41 PM

Found the fasteners today in Missoula Montana, awesome yard.

cla5675 · 06-09-2018, 12:02 PM

Still have the radiator top clamp/mount? Thanks!!

Troy.

pimpston65 · 06-10-2018, 07:36 AM

my parts arrived this week!!! free shipping, my sister drove them up from Ga.

**southern parts** · 06-11-2018, 02:15 PM

aerotruk63 -sorry I didn't get back with you sooner, busy week last week.

cla5675- I will try to get it shipped tomorrow.

pimpston- good luck with your project. We need to see it when it's done.

cla5675 · 06-14-2018, 03:29 PM

Quote:

Originally Posted by southern parts

cla5675- I will try to get it shipped tomorrow.

Rec'd the clamp today. Fit perfectly. Thanks SOOO much!!

Troy.

**aerotruk63** · 06-20-2018, 07:23 PM

Are the bed strips similar to fleetside size and spacing?

**southern parts** · 06-21-2018, 06:09 AM

I stripped a bunch of pieces from it and took it to the crusher last week. unfortunately I didn't remove the floor strips.

**aerotruk63** · 06-21-2018, 06:54 AM

Oh well.

Killer Bee · 06-21-2018, 01:20 PM

moment of silence please.....

johnnyburban · 06-29-2018, 04:11 PM

do you still have the water pump pulley and ps bracket from post#39?

**southern parts** · 06-30-2018, 04:32 PM

Yes I do

johnnyburban · 06-30-2018, 05:28 PM

how much for both with shipping to 60656?

Lokin4AReason · 10-11-2018, 10:01 AM

what kind of head(s) are on the engine ...

**southern parts** · 10-11-2018, 01:44 PM

The truck is long gone, I only have a few pieces that I pulled from it.

Lokin4AReason · 10-11-2018, 02:30 PM

what kind of part(s) do you still have left ....?

**southern parts** · 10-11-2018, 06:41 PM

It would be easier if you let me know what you were looking for.

05-31-2018, 07:02 AM	#1
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting 1966 panel truck Never heard back on the tail lights. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

05-31-2018, 12:12 PM	#2
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,474	Re: Parting 1966 panel truck $50 on the tail lights. The lenses are cracked Attached Images

06-04-2018, 07:49 PM	#4
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,627	Re: Parting 1966 panel truck Hey Woody just making sure you got the email I sent you about the Custom trim. No rush, whenever you get a chance is fine.

06-05-2018, 09:37 AM	#5
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,474	Re: Parting 1966 panel truck The custom trim has lost most of the anodized coating and all of the pieces have some scratches.I did buy the light weight pvc pipe.

06-05-2018, 11:19 AM	#6
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Parting 1966 panel truck Very happy with schroud and pulleys. Can you show me the fasteners that hold the schroud to the baffels please. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

06-04-2018, 06:23 PM	#3
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,818	Re: Parting 1966 panel truck everything arrived well packed and as advertised, thank you! __________________ *I started out with nothing - and I still have most of it*

06-05-2018, 07:17 PM	#7
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,474	Re: Parting 1966 panel truck here you go. 3/8 head and less than 1/2 of thread Attached Images

06-05-2018, 07:58 PM	#8
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Parting 1966 panel truck Thank you. Would you sell the fasteners? __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

06-08-2018, 05:41 PM	#9
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Parting 1966 panel truck Found the fasteners today in Missoula Montana, awesome yard. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

06-09-2018, 12:02 PM	#10
cla5675 Registered User Join Date: Apr 2018 Location: Lebanon, Ohio Posts: 80	Re: Parting 1966 panel truck Still have the radiator top clamp/mount? Thanks!! Troy.

06-10-2018, 07:36 AM	#11
pimpston65 Registered User Join Date: Aug 2013 Location: corktown,mi. Posts: 5,196	Re: Parting 1966 panel truck my parts arrived this week!!! free shipping, my sister drove them up from Ga. Attached Images

06-11-2018, 02:15 PM	#12
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,474	Re: Parting 1966 panel truck aerotruk63 -sorry I didn't get back with you sooner, busy week last week. cla5675- I will try to get it shipped tomorrow. pimpston- good luck with your project. We need to see it when it's done.

06-20-2018, 07:23 PM	#14
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Parting 1966 panel truck Are the bed strips similar to fleetside size and spacing? __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

06-21-2018, 06:09 AM	#15
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,474	Re: Parting 1966 panel truck I stripped a bunch of pieces from it and took it to the crusher last week. unfortunately I didn't remove the floor strips.

06-21-2018, 06:54 AM	#16
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Parting 1966 panel truck Oh well. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1



Register or Log In To remove these advertisements.

06-21-2018, 01:20 PM	#17
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,818	Re: Parting 1966 panel truck moment of silence please..... __________________ *I started out with nothing - and I still have most of it*

06-29-2018, 04:11 PM	#18
johnnyburban Registered User Join Date: Dec 2013 Location: chicago illinois Posts: 24	Re: Parting 1966 panel truck do you still have the water pump pulley and ps bracket from post#39?

06-30-2018, 04:32 PM	#19
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,474	Re: Parting 1966 panel truck Yes I do

06-30-2018, 05:28 PM	#20
johnnyburban Registered User Join Date: Dec 2013 Location: chicago illinois Posts: 24	Re: Parting 1966 panel truck how much for both with shipping to 60656?

10-11-2018, 10:01 AM	#21
Lokin4AReason Registered User Join Date: Oct 2014 Location: somewhere . . . Posts: 974	Re: Parting 1966 panel truck what kind of head(s) are on the engine ... __________________ dont want to hear excuses, i want to hear solution(s)

10-11-2018, 01:44 PM	#22
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,474	Re: Parting 1966 panel truck The truck is long gone, I only have a few pieces that I pulled from it.

10-11-2018, 02:30 PM	#23
Lokin4AReason Registered User Join Date: Oct 2014 Location: somewhere . . . Posts: 974	Re: Parting 1966 panel truck what kind of part(s) do you still have left ....? __________________ dont want to hear excuses, i want to hear solution(s)

10-11-2018, 06:41 PM	#24
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,474	Re: Parting 1966 panel truck It would be easier if you let me know what you were looking for.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.