Boyd Welding-67-72 Rear Mount Aluminum Tank - Page 32 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kpc01 · 07-11-2013, 10:56 PM

Quote:

Originally Posted by Clyde65

My truck is about 4.5-5" dropped in the back. It hangs about 4 or so inches below the rails IIRC. If you have your bed off and you are planning on raising the bed floor, you could mount it on top of the rails. Ill try and get you a pic of the tank and the placement in the morning.

Thanks Clyde,

Mines a suburban so trying to keep the floor back there as low as I can, but can probably adjust it if I had to. I guess I'll just have to give it a try to see how high i can get it wth the stock floor. My current tank is about 13" tall and is right at the floor. thanks for the info!

Tuffy66 · 07-12-2013, 11:12 PM

I was going to buy one from Boyd tonight but if I have to wait to get it cheaper..I'm in on the group buy

**Daveboyd** · 07-15-2013, 09:59 AM

2013 GROUP BUY IS NOW LIVE ON OUR WEBSITE!!!

This group buy is available via website only and requires a coupon code that will only be posted here.

Ordering Time Frame: begins 7/15 ends 7/19

Discount = 18%

Production times: We have a number of tanks in-stock but please allow 2 weeks from the time you order just in-case (A-1000 tanks may take longer)

How to order: Website only Follow this link http://www.fueltankparts.com/replace...evy-tanks.html

C20-67_N_MO · 07-15-2013, 10:02 AM

SWEET!

Thanks Dave.

I'm sure everyone that is interested will take advantage of this offer.

blazed870 · 07-15-2013, 10:39 AM

ordered, thanks!. I ordered 0-90 ohm sender with it, that works with the painless wiring and stock gauges right?

**Hart_Rod** · 07-15-2013, 10:53 AM

Quote:

Originally Posted by Daveboyd

2013 GROUP BUY IS NOW LIVE ON OUR WEBSITE!!!

This group buy is available via website only and requires a coupon code that will only be posted here.

Ordering Time Frame: begins 7/15 ends 7/19

Discount = 18%

Production times: 2-4 weeks (begins after the GB ends) (A-1000 tanks may take longer)

COUPON CODE: 6772GB13

How to order: Website only Follow this link http://www.boydwelding.com/shop/inde...7-72-c-10.html

Dave - I already have an A1000 pump. How much would I save off of the price? Thanks,

Rob

Sammy · 07-15-2013, 11:19 AM

Placed order..Thanxs

**Daveboyd** · 07-15-2013, 11:36 AM

Quote:

Originally Posted by Hart_Rod

Dave - I already have an A1000 pump. How much would I save off of the price? Thanks,

Rob

PM Sent

Pro Performance · 07-15-2013, 11:38 AM

Dave has worked with us on this group buy as well, and we will be offering the same pricing through our website. Just enter the same coupon code: 6772GB13

http://www.azproperformance.com/Boyd...nks-67-72-C10/

If you will be purchasing other items from us and calling in, just let us know and we will make sure to extend this deal to you.

Thanks

- Travis

chevyguy_72 · 07-15-2013, 11:54 AM

What is the benefit of the a1000 tank vs the stealth?
Thanks

**Daveboyd** · 07-15-2013, 05:22 PM

Quote:

Originally Posted by chevyguy_72

What is the benefit of the a1000 tank vs the stealth?
Thanks

The A1000 and stealth 340 are totally different pumps.

the stealth 340 is best used in EFI applications under 600 HP. It runs perfect with LS style engines.

The A1000 is used when HP is between 600 and 1300HP and when running turbos, superchargers or lots of nitrous.

C10_ustacould · 07-15-2013, 05:55 PM

My order is in, thanks Dave!!

chevyguy_72 · 07-15-2013, 09:42 PM

If I buy the stealth tank/pump is it upgradeable to the A1000 pump at a later time? or is the tank totally different?

Is the a1000 tank available in a side fill?

Thanks

Quote:

Originally Posted by Daveboyd

The A1000 and stealth 340 are totally different pumps.

the stealth 340 is best used in EFI applications under 600 HP. It runs perfect with LS style engines.

The A1000 is used when HP is between 600 and 1300HP and when running turbos, superchargers or lots of nitrous.

darkhorse970 · 07-15-2013, 10:07 PM

I just placed an order on your website for a Side Fill Standard tank. I added a Sending Unit and Rollover Vent, as well as the powdercoat option. I would like to be able to convert to EFI in the future, so please provision the tank for the Return Line also. Please call me if there are any questions about my requests above. My name is Keith Cromwell, thanks.

**Daveboyd** · 07-16-2013, 08:28 AM

Quote:

Originally Posted by chevyguy_72

If I buy the stealth tank/pump is it upgradeable to the A1000 pump at a later time? or is the tank totally different?

Is the a1000 tank available in a side fill?

Thanks

The tank structure, pump opening and bolt pattern are totally different so there is no way to upgrade to the A-1000 From the stealth 340.

yes, the A1000 is available in side fill. I will add that option to the website this morning.

**Daveboyd** · 07-16-2013, 08:29 AM

Quote:

Originally Posted by darkhorse970

I just placed an order on your website for a Side Fill Standard tank. I added a Sending Unit and Rollover Vent, as well as the powdercoat option. I would like to be able to convert to EFI in the future, so please provision the tank for the Return Line also. Please call me if there are any questions about my requests above. My name is Keith Cromwell, thanks.

Keith,

The return fitting is standard on all tanks. Thanks for your order.

**Daveboyd** · 07-16-2013, 10:28 AM

Quote:

Originally Posted by Daveboyd

2013 GROUP BUY IS NOW LIVE ON OUR WEBSITE!!!

This group buy is available via website only and requires a coupon code that will only be posted here.

Ordering Time Frame: begins 7/15 ends 7/19

Discount = 18%

Production times: We have a number of tanks in-stock but please allow 2 weeks from the time you order just in-case (A-1000 tanks may take longer)

COUPON CODE: 6772GB13

How to order: Website only Follow this link http://www.boydwelding.com/shop/inde...7-72-c-10.html

Just wanted to clear up any questions on the production times. We currently have a stock of these tanks and as of right now all orders placed so far are ready to go and will leave in the next day or so.

depending upon the qty of tanks that sell it may take 2 weeks to fulfill your order.

chevyguy_72 · 07-16-2013, 10:54 AM

Quote:

Originally Posted by Daveboyd

The tank structure, pump opening and bolt pattern are totally different so there is no way to upgrade to the A-1000 From the stealth 340.

yes, the A1000 is available in side fill. I will add that option to the website this morning.

The stealth tank would fulfill my needs for now... BUT... I am wanting to possibly go Supercharged in the future... So I am thinking A1000 tank...
Would it be any issue to use this tank/pump on the non 600 hp engine for a yr or 2 until I get the SC added? extra stain on the pump or possibly the fuel system on the engine since it does push a higher volume of fuel?

Thanks

**Daveboyd** · 07-16-2013, 11:39 AM

Quote:

Originally Posted by chevyguy_72

The stealth tank would fulfill my needs for now... BUT... I am wanting to possibly go Supercharged in the future... So I am thinking A1000 tank...
Would it be any issue to use this tank/pump on the non 600 hp engine for a yr or 2 until I get the SC added? extra stain on the pump or possibly the fuel system on the engine since it does push a higher volume of fuel?

Thanks

using the A1000 now will not be an issue you just need to run a good regulator with a return.

Bennett68C10 · 07-16-2013, 11:49 AM

Just ordered mine, thanks again for the group buy.
Posted via Mobile Device

chevyguy_72 · 07-16-2013, 12:30 PM

Quote:

Originally Posted by Daveboyd

using the A1000 now will not be an issue you just need to run a good regulator with a return.

Do you sell the regulator or can you recommend one?
Thanks

EZ SPEED · 07-16-2013, 12:32 PM

Plan on ordering one of these today or tomorrow!!

chevyguy_72 · 07-16-2013, 10:36 PM

Also another question about the side fill tanks?
when installed as designed does the fill tube fit between the bed and the frame or is a notch or something required?
Thanks

1bad396ss · 07-16-2013, 10:43 PM

Order placed. Thanks for the discount. Much appreciated and look forward to installing this awesome product.

**Daveboyd** · 07-17-2013, 08:42 AM

Quote:

Originally Posted by chevyguy_72

Also another question about the side fill tanks?
when installed as designed does the fill tube fit between the bed and the frame or is a notch or something required?
Thanks

Sorry we don't carry the regulators. The side fill is intended to fit between the frame and bed. There are no notches required.

07-12-2013, 11:12 PM	#777
Tuffy66 Registered User Join Date: Apr 2008 Location: Westhope, ND Posts: 19	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I was going to buy one from Boyd tonight but if I have to wait to get it cheaper..I'm in on the group buy

07-15-2013, 09:59 AM	#778
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank 2013 GROUP BUY IS NOW LIVE ON OUR WEBSITE!!! This group buy is available via website only and requires a coupon code that will only be posted here. Ordering Time Frame: begins 7/15 ends 7/19 Discount = 18% Production times: We have a number of tanks in-stock but please allow 2 weeks from the time you order just in-case (A-1000 tanks may take longer) How to order: Website only Follow this link http://www.fueltankparts.com/replace...evy-tanks.html __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com Last edited by Daveboyd; 07-20-2013 at 04:53 PM. Reason: Production times change

07-15-2013, 10:02 AM	#779
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank SWEET! Thanks Dave. I'm sure everyone that is interested will take advantage of this offer. __________________ Coming Soon: Project 1970 Country Truck

07-15-2013, 10:39 AM	#780
blazed870 Registered User Join Date: Jan 2009 Location: Bakersfield, CA Posts: 47	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank ordered, thanks!. I ordered 0-90 ohm sender with it, that works with the painless wiring and stock gauges right?

07-15-2013, 11:19 AM	#782
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Placed order..Thanxs __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

07-15-2013, 11:38 AM	#784
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave has worked with us on this group buy as well, and we will be offering the same pricing through our website. Just enter the same coupon code: 6772GB13 http://www.azproperformance.com/Boyd...nks-67-72-C10/ If you will be purchasing other items from us and calling in, just let us know and we will make sure to extend this deal to you. Thanks - Travis

07-15-2013, 11:54 AM	#785
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Hastings, Nebraska Posts: 956	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank What is the benefit of the a1000 tank vs the stealth? Thanks

07-15-2013, 05:55 PM	#787
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank My order is in, thanks Dave!! __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

07-15-2013, 10:07 PM	#789
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,104	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I just placed an order on your website for a Side Fill Standard tank. I added a Sending Unit and Rollover Vent, as well as the powdercoat option. I would like to be able to convert to EFI in the future, so please provision the tank for the Return Line also. Please call me if there are any questions about my requests above. My name is Keith Cromwell, thanks. __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941 Last edited by darkhorse970; 07-15-2013 at 11:08 PM.

07-16-2013, 11:49 AM	#795
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Just ordered mine, thanks again for the group buy. Posted via Mobile Device

07-16-2013, 12:32 PM	#797
EZ SPEED Registered User Join Date: May 2009 Location: Anniston, Alabama Posts: 164	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Plan on ordering one of these today or tomorrow!! __________________ Eric 1967 C10 Small Window - LWB http://67-72chevytrucks.com/vboard/s...d.php?t=657509 2004 Silverado 2500HD - Turbo Diesel 603 rwhp / 1090 rwtq 2016 Camaro SS - Satin Pearl Nero wrap My 2010 Camaro SS Magazine feature (SOLD) http://www.superchevy.com/features/g...of-perfection/

07-16-2013, 10:36 PM	#798
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Hastings, Nebraska Posts: 956	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Also another question about the side fill tanks? when installed as designed does the fill tube fit between the bed and the frame or is a notch or something required? Thanks

07-16-2013, 10:43 PM	#799
1bad396ss Registered User Join Date: Jul 2012 Location: STL MO Posts: 85	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Order placed. Thanks for the discount. Much appreciated and look forward to installing this awesome product.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.