07-03-2015, 02:05 PM | #826 |
Registered User
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,645
|
Re: Intro from an old Assembly Plant guy
Keith,
Have answer to one of the questions, via trial - added module and it works. "Keith, Thanks for the brace location on the engine/ bell housing. Follow-up question, will they work on my replacement 350 block, e.g. Are the motor mount in same position from rear of block on a 350, as on a 4.3? Also, do you know what force they are counteracting? E.g. Engine torque rotation or stronger engine/bell housing connection. Intermittent Wiper Function One other question, I am changing out the steering column from standard to a tilt one on my 1986' C10, as part of my interior R/R. The tilt column has the intermittent wiper function, however, original did not. To make the intermittent function work, on the tilt column, is it correct thinking, that I need to add only the "intermittent" module to the wiper wiring harness that come out the lower part of the column, and then plug original dash wire harness into module? Thanks, Les " The intermittent wiper (IW) module was all that I needed to add to standard wiper (Hi-Lo-Pulse) dash wire harness to make the new column with IWs work. Got the module from my Chevy dealer parts department. These modules were used for many years. Got a new one because they are known to go bad, for some reason. Connected the wiper wire harness from the lower part of the steering column to one side of module and connected the other side of module to the existing wiper plug from dash wire harness. Very easy. Les |
07-06-2015, 09:10 AM | #827 | |
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,226
|
Re: Intro from an old Assembly Plant guy
Quote:
The braces are to counteract a powertrain "beaming" mode, and provide more support across that engine/bell housing interface. K
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ Last edited by Keith Seymore; 07-06-2015 at 11:16 AM. |
|
07-06-2015, 09:16 AM | #828 |
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,226
|
Re: Intro from an old Assembly Plant guy
We did something a little different this year for the 4th of July:
Our local Pontiac club participates in one of the nearby 4th of July parades. By definition, then, I usually bring one of the old Ponchos but this year I thought it might be fun to bring the pickup and let the kids ride along in the back. They seemed to enjoy it, plus I was parading in air conditioned comfort. The last pic was pretty much everyone's response to seeing the little red truck in the parade. K
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ |
07-06-2015, 02:16 PM | #829 |
Registered User
Join Date: Mar 2008
Location: Clarkston,Michigan
Posts: 121
|
Hey keith/neighbor down the road..lol
Just figured i would share a pic with ya of the newly painted truck, incase ya seen it around town youd know who it was lol Posted via Mobile Device |
07-06-2015, 02:55 PM | #830 |
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,226
|
Re: Intro from an old Assembly Plant guy
Looks great; duly noted...
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ |
07-13-2015, 12:03 PM | #831 |
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,226
|
Re: Intro from an old Assembly Plant guy
Peter Frampton and Cheap Trick last night at the venue formerly known as Pine Knob.
I slept with the bedroom window open and got a free concert... K
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ |
07-14-2015, 02:07 AM | #832 |
Registered User
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,645
|
Re: Intro from an old Assembly Plant guy
LMC door panels question?
Just got mine from LMC and the original chrome door handle insert do not fit as molded. Especially in the door handle area. Did yours fit or did you have to remove some of the material near where the door handle comes through? If removing material does it effect the fastener screws? Your pictures look like screws are correct on yours. Did read earlier post from around 2010, on LMC door panels. Thanks, Les |
07-15-2015, 04:29 PM | #833 |
Registered User
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,645
|
Re: Intro from an old Assembly Plant guy
Keith ,
Found instructions in bottom of shipping box on how to modify panel, to accommodate bezels. Thanks, Les |
07-15-2015, 05:30 PM | #834 | |
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,226
|
Re: Intro from an old Assembly Plant guy
Quote:
K
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ |
|
07-24-2015, 07:48 AM | #835 |
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,226
|
Re: Intro from an old Assembly Plant guy
GM Tech Center Employee car show this past Wednesday.
No brakes on the Grand Prix so Red had to do show duty, too. Made sense, anyway, since I had to do a Home Depot run on the way home. I wouldn't have been able to do that with one of the Pontiacs... K
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ |
07-25-2015, 03:07 PM | #836 |
Registered User
Join Date: Jan 2013
Location: Nacogdoches, Texas
Posts: 895
|
Re: Intro from an old Assembly Plant guy
Man that sure is a pretty truck!
__________________
Current Build 89 s10 ecsb 2wd 4.3/700r4 50k OG Miles Instagram- shaggin_s10 '86 Chevrolet C10 Custom Deluxe - Gen V 454 - 4l80e - welded 12 bolt (Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611611 ) SOLD |
09-21-2015, 07:31 AM | #837 |
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,226
|
Re: Intro from an old Assembly Plant guy
Am I a bad person for going to the races and only taking pictures of pickup trucks in the parking lot?
(lol) I went to the Pure Stock Muscle Car Drags in Stanton Michigan as a spectator on Friday. http://www.psmcdr.com/ The photos below are what I saw when I came back out. It’s an ’85 GMC out of Flint (VIN FF717xxx); beautiful paint, probably a fresh restore, including rhino liner in the bed, cowl hood. P255/70 tires. Could stand to drop down a couple inches… K
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ |
09-21-2015, 07:41 AM | #838 |
Registered User
Join Date: Jun 2011
Location: Baytown TX
Posts: 2,219
|
Re: Intro from an old Assembly Plant guy
Did you talk him into a mild drop like yours?
__________________
John 82 Chevy Silverado 350ci/TH350 |
09-21-2015, 07:51 AM | #839 |
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,226
|
Re: Intro from an old Assembly Plant guy
No, we didn't connect.
I would have liked to visit with him; I probably put the fenders on that truck (50/50 chance that it came through on second shift). K
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ |
09-21-2015, 08:23 AM | #840 |
Registered User
Join Date: Jun 2011
Location: Baytown TX
Posts: 2,219
|
Re: Intro from an old Assembly Plant guy
My 82 is a Flint built truck also.
__________________
John 82 Chevy Silverado 350ci/TH350 |
09-21-2015, 07:17 PM | #841 |
Curmudgeon of Poor Means
Join Date: Jan 2009
Location: Lubbock, Texas
Posts: 113
|
Re: Intro from an old Assembly Plant guy
Call me weird; I like 'em stock height...it's a pickup! Only thing I'd fault it for in the picture is the roll pan...I like bumpers too!
|
09-22-2015, 03:08 PM | #842 |
Registered User
Join Date: Apr 2010
Location: Willits Ca
Posts: 132
|
Re: Intro from an old Assembly Plant guy
Hey Keith, great read! I have read about all of your threads here and py, my dad has a 64 GTO we have had since 89 when I was born he had a 68 lemans my grandpa bought new, and another 68 lemans vert.....loved the story's about John Z and the kid on the bike!! He worked with a guy who was a factory line builder for Chevrolet cars I believe and he told him that most employees would order a car as a stripper and secretly build the luxury options as they followed it down the line....
__________________
1965 Chevy C-20 slammed 292 L6 TH400 1967 Chevy C-20 on 91 suburban frame project(wife's) 1972 Chevy K-20 Mild 350/th350/np2o5 dd 1952 Ford Customline 2door kustom project 1967 Cadillac Superior Hearse (wife's) 1998 GMC Saffari (wife's dd) |
09-23-2015, 10:09 PM | #843 |
Registered User
Join Date: Sep 2015
Location: St.Thomas, ON
Posts: 320
|
Re: Intro from an old Assembly Plant guy
Very cool story!
|
09-24-2015, 12:46 AM | #844 |
Registered User
Join Date: May 2008
Location: Spokane, Washington
Posts: 596
|
Re: Intro from an old Assembly Plant guy
I bet I have read your build thread 3 or 4 times since it began. Thank you for all the GM truck history you provide and excellent job on your truck.
|
09-29-2015, 07:14 AM | #845 | |
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,226
|
Re: Intro from an old Assembly Plant guy
Someone has a birthday!
29 years ago today. Went in to the plant at 4:30pm and it was just coming down out of paint and into the Trim area. Followed it all the way through the process and left the plant at 1 am Tuesday morning. K Quote:
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ |
|
09-29-2015, 08:08 AM | #846 |
Registered User
Join Date: Jun 2011
Location: Baytown TX
Posts: 2,219
|
Re: Intro from an old Assembly Plant guy
So it takes 8 1/2 hours to complete assembly?
__________________
John 82 Chevy Silverado 350ci/TH350 |
09-29-2015, 08:21 AM | #847 |
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,226
|
Re: Intro from an old Assembly Plant guy
From that stage of completion, yes (depending on any other downtime, rolling breaks, etc).
The cab/box would have started probably a day or two ahead of that, in order to be completely welded up and through the paint process where I started with it. I must have had the build sequence number so that I could track it down. I wish now I had kept all that stuff (build manifest, inspection tickets and such). K
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ |
11-04-2015, 08:09 AM | #848 |
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,226
|
Re: Intro from an old Assembly Plant guy
Well....I have news.
I sold the red truck. It all happened kinda fast. My friend/engine builder had a really nice truck that I have been lusting after for many years. It's an 04 Chevy, crew cab short box, diesel. All set up for pulling trailers, etc. I've had my eye on it for as long as I have known him. He sent me a text over the weekend that he was (finally!) selling his truck. I originally told him I was not interested but, after agonizing over it all day Sunday I wrote him back saying I would be - IF - my brother in law would be interested in the red truck. My b-i-l immediately said "yes" so as of this morning I have the check in my pocket and the red truck still in my garage. I think it will probably sit in my garage over the winter and I'll finish up a couple odds and ends that still need to be done. Looks like a pretty good deal for all those involved. K
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ |
11-04-2015, 08:26 AM | #849 |
Registered User
Join Date: Oct 2011
Location: Delta Pa
Posts: 22
|
Re: Intro from an old Assembly Plant guy
Cool story i am installing a my-6 in my '68 long step 2wd it has 98 vortec engine. You think it will be driveable with 4.56 ,holley780,hookers i need ideas for roller cam replacement choice
|
11-04-2015, 08:44 AM | #850 | |
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,226
|
Re: Intro from an old Assembly Plant guy
Quote:
K
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ Last edited by Keith Seymore; 11-04-2015 at 10:15 AM. |
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|