What did you do to your truck today?

[robber grin]

Wiper motor and linkages are on. Cowl panel and seal on. Bullets till we power up and zero the motor then I'll probably go with wipers. Bumper brackets are on and bumper is bolted down for good. Decided not to use the guards and put them away for another day perhaps - just seemed so clean and straight without them. Old 63 Cali tag and Showdown topper on. Primered the filler panel valances and front fenders before we called it a day... great weekend!

RG & ray

[T2vigil]

Finally got enugh fuel out of the original tank to do the swap to the underbead tank. Installed the new spedometer cable in along with the two speed wiper motor. All in all a good day.

[Andice]

Very nice looking truck, Newfisher! You don't see that orange color often and the tutone and stock wheels look great! Got more pictures?

[wjjeeper]

I got these perfect patina headlight bezels on my truck ....

[64chevtruck]

Got my rear bags on today, No fun deflating them when the front isnt done yet though,,,, Front bags and Step notch next,

Got a bunch of stuff from uncle Tom recently and got the 292 almost finished too,

More to come soon!


Take care

Andy

[BigDan3131]

I took the first step in moving my truck from our main shop to the shop we are renting down the street so I can work on it year round. Its a complete mechanics shop with lifts and our booth that isn't being used by the owner. He's just happy to have someone in it to "keep an eye on things" when he isn't around.

[Daking19]

Powered coated my grill and put it on with my lil helper

[TJ's Chevy]

Originally Posted by 64chevtruck

Got my rear bags on today, No fun deflating them when the front isnt done yet though,,,, Front bags and Step notch next,

Got a bunch of stuff from uncle Tom recently and got the 292 almost finished too,

More to come soon!


Take care

Andy

The 292 looks killer! Awesome inline! Trucks looking good also! So is Tom Langdon really your uncle? I've talked to him quite a number a times on my inline.

[FetchMeAPepsi]

Originally Posted by Daking19

Powered coated my grill and put it on with my lil helperAttachment 1160031

Attachment 1160032

There's nothing like father son time in the garage! Great little helper you got there.

All my helpers were climbing trees and playing volleyball but I got my transmission back in and found out all I needed to do was tighten a nut to fix my problem. Not rebuild the entire tranny. Oh well. At least I have a brand new transmission now!

Then I pulled out my Rockwell T221 for a rebuild. It's one heavy beast!

[64chevtruck]

Originally Posted by T.J. MCCAULEY

The 292 looks killer! Awesome inline! Trucks looking good also! So is Tom Langdon really your uncle? I've talked to him quite a number a times on my inline.

Hi and Thank you, Tom is not my Uncle for real, but I talked to him a few times also and he reminds me of some of my family members, Plus hes got a great cabin,......(kidding)

My 292 was rebuilt a few years ago but I ran out of money, hardly driven, It has flat top pistons (305?) stainless push rods, HEI, Lump ported head off a newer Goodwrench 292, 6 lbs shaved off the flywheel, and a cam that is not really correct, Ill probably put a normal RV towing cam in it later.

Heres a better pic, more pics coming soon with more stuff added and exhaust.

Take care

Andy

[TJ's Chevy]

Originally Posted by 64chevtruck

Hi and Thank you, Tom is not my Uncle for real, but I talked to him a few times also and he reminds me of some of my family members, Plus hes got a great cabin,......(kidding)

My 292 was rebuilt a few years ago but I ran out of money, hardly driven, It has flat top pistons (305?) stainless push rods, HEI, Lump ported head off a newer Goodwrench 292, 6 lbs shaved off the flywheel, and a cam that is not really correct, Ill probably put a normal RV towing cam in it later.

Heres a better pic, more pics coming soon with more stuff added and exhaust.

Take care

Andy

Might be flat top pistons from a 307... What type of cam? I know a good cam company is Delta cams. I believe they will do a custom grind. Or Clifford's 264 or 270 hyd. cam is good also. The 264 gives .518 lift with the stock rocker arm ratio and 264 degrees duration. If you get a cahnce to post a video of it running that would be fantastic! Thanks. T.J.

[coulter]

made some progress on my bed floor and wheel tubs this weekend

[zippeay]

Looks nice Coultur, where did you get the wood from? I have my stainless strips but I'm thinking about making my own wood slats. The kits aren't usually very cheap.

[64chevtruck]

Originally Posted by coulter

made some progress on my bed floor and wheel tubs this weekend

Great work on the bed and extending the wells.

[chad64chevy]

well, this weekend I got my motor put back together and my transmission cleaned and painted! heres some pictures, I got it put back in the truck but, I didn't get a picture of it sitting in the truck!!

[coulter]

Originally Posted by zippeay

Looks nice Coultur, where did you get the wood from? I have my stainless strips but I'm thinking about making my own wood slats. The kits aren't usually very cheap.

thanx man i got the wood from a local lumber yard. its just some cheap white pine but looks really good all stained and varnished up
btw it cost me about 100$ for all the wood

Originally Posted by 64chevtruck

Great work on the bed and extending the wells.

thanx man

[Chvyman1975]

Not from today but this past weekend. Got the motor painted and installed. Almost went with the tunnel ram intake but decided against it.

[1963c-10]

Picked up a new master cylinder for the 63 last night. Will be the upcoming project this weekend...Will be replacing the front to rear brake line also.

[ncoonen]

Originally Posted by 1963c-10

Picked up a new master cylinder for the 63 last night. Will be the upcoming project this weekend...Will be replacing the front to rear brake line also.

Do you plan to split the front and rear brakes using a dual-circuit master or is this a direct replacement of the stock MC? I am hemmin' and hawin' about whether to:

• just leave the stock setup alone;
• install a dual-circuit master with the stock drums;
• install front disk brakes with a new manual master;
• install front disks and change to power brakes;
• go with a four-wheel disk conversion and power brakes.

My brakes are "1963 fine" but I often drive in 2013 urban traffic and having great brakes is a priority with all the distracted driving going on these days.

...ned.

[1963c-10]

I have a disk brake conversion kit and a new dual master w/stainless steel line kit to install at some point. Im just going to replace the stock unit w/another stock unit to keep it functional for now. Its still my daily driver, so until I take it off the road to do all the conversions I have set up in boxes....just keeping it reliable and safe.

I still have the original 230 installed, so the single master will be fine. I'll definitely be upgrading to the disk brakes and dual master with the big block going in.


***pedal has been getting a little softer lately. No fluid loss, brakes are adjusted good, cylinders are functioning fine, but lately pedal is getting uncomfortably softer and closer to the floor. Had to just about stand on them the other day to stop, so I'm pretty sure the fluid is bypassing in the master cylinder. $24 for a replacement through o'reillys...but rain for the next few days, so it'll probably be Thursday before I can get it installed. When inspecting the brake system I noticed the front to rear brake line doesn't look that great. Its not leaking, but it doesn't look the best, and for the cost and piece of mind it'll get replaced. I'll probably go 3/16" line like the factory did although a lot of people run 1/4" front the front "t" to the rear rubber line. Other option is to go 1/4" back from the front "t" since it'll all be 1/4" on the back when the dual master goes in.

Part # 10-34403 $24 at O'reillys should it help anyone else.

Another note....I've owned quite a few of these 1st gen c-10's and this was the first to have the 1 1/8" cylinder with the off set firewall mounts. Normally I see the small round mc with the bale on top. But the firewall only has the offset holes, so it was stock on this truck at least.

[64chevtruck]

The single lung masters are dangerous, Lose one line and all your brakes go out, happened to me twice. Ill be switching to a dual master asap.

[K98AL]

Got my '62 back from the painter!

[TJ's Chevy]

Originally Posted by K98AL

Attachment 1160417
Got my '62 back from the painter!

AWESOME!!!!

[markeb01]

Wow!! Love the color choice and the beautiful body work.

[markeb01]

Originally Posted by 1963c-10

***pedal has been getting a little softer lately. No fluid loss, brakes are adjusted good, cylinders are functioning fine, but lately pedal is getting uncomfortably softer and closer to the floor. Had to just about stand on them the other day to stop.

I've had that happen a few times as well. In my experience it turned out to be the rubber flex hoses, especially the one in the rear. Front hoses seem to be replaced every now and then but the rear hose almost never for some reason. The hoses deteriorate from the inside out, and when they get bad enough they can swell up absorbing some of the pressure meant to reach the wheel cylinders.